Return-path: Received: from mail-wi0-f172.google.com ([209.85.212.172]:51169 "EHLO mail-wi0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758131Ab2EJJPh (ORCPT ); Thu, 10 May 2012 05:15:37 -0400 Received: by mail-wi0-f172.google.com with SMTP id hr2so244170wib.1 for ; Thu, 10 May 2012 02:15:37 -0700 (PDT) From: Arik Nemtsov To: Cc: Luciano Coelho , Arik Nemtsov Subject: [PATCH 31/78] wl18xx: add module param for overriding HT caps Date: Thu, 10 May 2012 12:13:36 +0300 Message-Id: <1336641263-5761-32-git-send-email-arik@wizery.com> (sfid-20120510_112246_161869_AF943B24) In-Reply-To: <1336641263-5761-1-git-send-email-arik@wizery.com> References: <1336641263-5761-1-git-send-email-arik@wizery.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Set an alternate HT cap allowing MIMO rates (but only 20mhz) channels, when the module is loaded with ht_mode=mimo. Signed-off-by: Arik Nemtsov --- drivers/net/wireless/ti/wl18xx/main.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a0bec8f..17792e2 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -41,6 +41,8 @@ #define WL18XX_RX_CHECKSUM_MASK 0x40 +static char *ht_mode_param; + static const u8 wl18xx_rate_to_idx_2ghz[] = { /* MCS rates are used only with 11n */ 15, /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */ @@ -936,6 +938,19 @@ static struct ieee80211_sta_ht_cap wl18xx_ht_cap = { }, }; +/* HT cap appropriate for MIMO rates in 20mhz channel */ +static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap = { + .cap = IEEE80211_HT_CAP_SGI_20, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(144), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + int __devinit wl18xx_probe(struct platform_device *pdev) { struct wl1271 *wl; @@ -960,6 +975,10 @@ int __devinit wl18xx_probe(struct platform_device *pdev) wl->hw_min_ht_rate = WL18XX_CONF_HW_RXTX_RATE_MCS0; wl->fw_status_priv_len = sizeof(struct wl18xx_fw_status_priv); memcpy(&wl->ht_cap, &wl18xx_ht_cap, sizeof(wl18xx_ht_cap)); + if (ht_mode_param && !strcmp(ht_mode_param, "mimo")) + memcpy(&wl->ht_cap, &wl18xx_mimo_ht_cap, + sizeof(wl18xx_mimo_ht_cap)); + wl18xx_conf_init(wl); return wlcore_probe(wl, pdev); @@ -993,6 +1012,9 @@ static void __exit wl18xx_exit(void) } module_exit(wl18xx_exit); +module_param_named(ht_mode, ht_mode_param, charp, S_IRUSR); +MODULE_PARM_DESC(ht_mode, "Force HT mode: wide or mimo"); + MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Luciano Coelho "); MODULE_FIRMWARE(WL18XX_FW_NAME); -- 1.7.9.5