Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:21161 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964817Ab2ESIoz (ORCPT ); Sat, 19 May 2012 04:44:55 -0400 From: Rajkumar Manoharan To: CC: , Rajkumar Manoharan Subject: [PATCH v2 10/10] ath9k_hw: fix power state for MCI Date: Sat, 19 May 2012 14:13:56 +0530 Message-ID: <1337417036-1431-10-git-send-email-rmanohar@qca.qualcomm.com> (sfid-20120519_104504_108988_06935858) In-Reply-To: <1337417036-1431-1-git-send-email-rmanohar@qca.qualcomm.com> References: <1337417036-1431-1-git-send-email-rmanohar@qca.qualcomm.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: Program MCI related power registers only if MCI interrupts are enabled. This could help to reduce power consumptions when WLAN alone is enabled in BT coex chips. Signed-off-by: Rajkumar Manoharan --- drivers/net/wireless/ath/ath9k/hw.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 9e8fef2..d13211d 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2006,12 +2006,9 @@ static void ath9k_set_power_sleep(struct ath_hw *ah) REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV); if (AR_SREV_9462(ah)) { - REG_WRITE(ah, AR_TIMER_MODE, - REG_READ(ah, AR_TIMER_MODE) & 0xFFFFFF00); - REG_WRITE(ah, AR_NDP2_TIMER_MODE, - REG_READ(ah, AR_NDP2_TIMER_MODE) & 0xFFFFFF00); - REG_WRITE(ah, AR_SLP32_INC, - REG_READ(ah, AR_SLP32_INC) & 0xFFF00000); + REG_CLR_BIT(ah, AR_TIMER_MODE, 0xff); + REG_CLR_BIT(ah, AR_NDP2_TIMER_MODE, 0xff); + REG_CLR_BIT(ah, AR_SLP32_INC, 0xfffff); /* xxx Required for WLAN only case ? */ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, 0); udelay(100); @@ -2023,7 +2020,7 @@ static void ath9k_set_power_sleep(struct ath_hw *ah) */ REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN); - if (AR_SREV_9462(ah)) + if (ath9k_hw_mci_is_enabled(ah)) udelay(100); if (!AR_SREV_9100(ah) && !AR_SREV_9300_20_OR_LATER(ah)) @@ -2048,7 +2045,6 @@ static void ath9k_set_power_sleep(struct ath_hw *ah) static void ath9k_set_power_network_sleep(struct ath_hw *ah) { struct ath9k_hw_capabilities *pCap = &ah->caps; - u32 val; REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV); @@ -2067,19 +2063,16 @@ static void ath9k_set_power_network_sleep(struct ath_hw *ah) * SYS_WAKING and SYS_SLEEPING messages which will make * BT CPU to busy to process. */ - if (AR_SREV_9462(ah)) { - val = REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_EN) & - ~AR_MCI_INTERRUPT_RX_HW_MSG_MASK; - REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, val); - } + if (ath9k_hw_mci_is_enabled(ah)) + REG_CLR_BIT(ah, AR_MCI_INTERRUPT_RX_MSG_EN, + AR_MCI_INTERRUPT_RX_HW_MSG_MASK); /* * Clear the RTC force wake bit to allow the * mac to go to sleep. */ - REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE, - AR_RTC_FORCE_WAKE_EN); + REG_CLR_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN); - if (AR_SREV_9462(ah)) + if (ath9k_hw_mci_is_enabled(ah)) udelay(30); } -- 1.7.10.2