Return-path: Received: from na3sys009aog125.obsmtp.com ([74.125.149.153]:33781 "EHLO na3sys009aog125.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755969Ab2EOOHX (ORCPT ); Tue, 15 May 2012 10:07:23 -0400 Received: by ggnc4 with SMTP id c4so2319355ggn.3 for ; Tue, 15 May 2012 07:07:11 -0700 (PDT) From: Victor Goldenshtein To: Cc: , Subject: [PATCH] wlcore: set channels 12-14 as pactive for sched scan Date: Tue, 15 May 2012 17:04:40 +0300 Message-Id: <1337090680-24733-1-git-send-email-victorg@ti.com> (sfid-20120515_160728_376309_4CF29D56) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: Introduce “pactive” scan mode – which instructs the fw to perform a passive scan until an activity/energy is detected on these channels, once energy detected the channel becomes active. Signed-off-by: Victor Goldenshtein --- drivers/net/wireless/ti/wlcore/scan.c | 39 +++++++++++++++++++++++++++----- drivers/net/wireless/ti/wlcore/scan.h | 8 +++++- 2 files changed, 39 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index ade21a0..97022f4 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -411,7 +411,8 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, struct cfg80211_sched_scan_request *req, struct conn_scan_ch_params *channels, u32 band, bool radar, bool passive, - int start, int max_channels) + int start, int max_channels, + u8 *n_pactive_ch) { struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, j; @@ -479,6 +480,23 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, channels[j].tx_power_att = req->channels[i]->max_power; channels[j].channel = req->channels[i]->hw_value; + if ((band == IEEE80211_BAND_2GHZ) && + (channels[j].channel >= 12) && + (channels[j].channel <= 14) && + (flags & IEEE80211_CHAN_PASSIVE_SCAN) && + !force_passive) { + /* pactive channels treated as DFS */ + channels[j].flags = SCAN_CHANNEL_FLAGS_DFS; + + /* + * n_pactive_ch is counted down from the end of + * the passive channel list + */ + (*n_pactive_ch)++; + wl1271_debug(DEBUG_SCAN, "n_pactive_ch = %d", + *n_pactive_ch); + } + j++; } } @@ -491,38 +509,47 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl, struct cfg80211_sched_scan_request *req, struct wl1271_cmd_sched_scan_config *cfg) { + u8 n_pactive_ch = 0; + cfg->passive[0] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_2, IEEE80211_BAND_2GHZ, false, true, 0, - MAX_CHANNELS_2GHZ); + MAX_CHANNELS_2GHZ, + &n_pactive_ch); cfg->active[0] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_2, IEEE80211_BAND_2GHZ, false, false, cfg->passive[0], - MAX_CHANNELS_2GHZ); + MAX_CHANNELS_2GHZ, + &n_pactive_ch); cfg->passive[1] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_5, IEEE80211_BAND_5GHZ, false, true, 0, - MAX_CHANNELS_5GHZ); + MAX_CHANNELS_5GHZ, + &n_pactive_ch); cfg->dfs = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_5, IEEE80211_BAND_5GHZ, true, true, cfg->passive[1], - MAX_CHANNELS_5GHZ); + MAX_CHANNELS_5GHZ, + &n_pactive_ch); cfg->active[1] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_5, IEEE80211_BAND_5GHZ, false, false, cfg->passive[1] + cfg->dfs, - MAX_CHANNELS_5GHZ); + MAX_CHANNELS_5GHZ, + &n_pactive_ch); /* 802.11j channels are not supported yet */ cfg->passive[2] = 0; cfg->active[2] = 0; + cfg->n_pactive_ch = n_pactive_ch; + wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d", cfg->active[0], cfg->passive[0]); wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d", diff --git a/drivers/net/wireless/ti/wlcore/scan.h b/drivers/net/wireless/ti/wlcore/scan.h index 81ee36a..ea53223 100644 --- a/drivers/net/wireless/ti/wlcore/scan.h +++ b/drivers/net/wireless/ti/wlcore/scan.h @@ -142,7 +142,8 @@ enum { SCAN_BSS_TYPE_ANY, }; -#define SCAN_CHANNEL_FLAGS_DFS BIT(0) +#define SCAN_CHANNEL_FLAGS_DFS BIT(0) /* channel is passive until an + activity is detected on it */ #define SCAN_CHANNEL_FLAGS_DFS_ENABLED BIT(1) struct conn_scan_ch_params { @@ -185,7 +186,10 @@ struct wl1271_cmd_sched_scan_config { u8 dfs; - u8 padding[3]; + u8 n_pactive_ch; /* number of pactive (passive until fw detects energy) + channels in BG band */ + + u8 padding[2]; struct conn_scan_ch_params channels_2[MAX_CHANNELS_2GHZ]; struct conn_scan_ch_params channels_5[MAX_CHANNELS_5GHZ]; -- 1.7.5.4