Return-path: Received: from mail-ee0-f46.google.com ([74.125.83.46]:37152 "EHLO mail-ee0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753158Ab2ECQKP (ORCPT ); Thu, 3 May 2012 12:10:15 -0400 Received: by eekc41 with SMTP id c41so581727eek.19 for ; Thu, 03 May 2012 09:10:14 -0700 (PDT) Date: Thu, 3 May 2012 18:10:03 +0200 From: Anisse Astier To: Gertjan van Wingerde , linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com Cc: Julian Calaby , linville@tuxdriver.com, Ivo van Doorn , Helmut Schaa , RA-ShiangTu , RA-Jay Hung , John Li , Kevin Chou Subject: Re: [PATCH v2] rt2800: add chipset revision RT5390R support Message-ID: <20120503181003.2c7c6f27@destiny.ordissimo> (sfid-20120503_181020_768188_4051D876) In-Reply-To: <1335177191-11101-1-git-send-email-anisse@astier.eu> References: <1335177191-11101-1-git-send-email-anisse@astier.eu> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi, Any opinon on the patch below ? On Mon, 23 Apr 2012 12:33:11 +0200, Anisse Astier wrote : > About 70% of the chips with revision RT5390R initialize incorrectly, using > the auxiliary antenna instead of the main one. The net result is that > signal reception is very poor (no AP further than 1M). > > This chipset differs from RT5390 and RT5390F by its support of hardware > antenna diversity. Therefore antenna selection should be done > differently, by disabling software features and previously selected > antenna. > > This changeset does just that, and makes all RT5390R work properly. > > This is based on Ralink's 2012_03_22_RT5572_Linux_STA_v2.6.0.0_DPO > driver. > > Signed-off-by: Anisse Astier > --- > Changes since v1: > - moved default_ant inits to proper function, thanks to Gertjan van Wingerde ! > > --- > drivers/net/wireless/rt2x00/rt2800.h | 1 + > drivers/net/wireless/rt2x00/rt2800lib.c | 12 ++++++++++++ > 2 files changed, 13 insertions(+) > > diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h > index 063bfa8..1ce2634 100644 > --- a/drivers/net/wireless/rt2x00/rt2800.h > +++ b/drivers/net/wireless/rt2x00/rt2800.h > @@ -83,6 +83,7 @@ > #define REV_RT3090E 0x0211 > #define REV_RT3390E 0x0211 > #define REV_RT5390F 0x0502 > +#define REV_RT5390R 0x1502 > > /* > * Signal information. > diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c > index bd19802..1cd16b4 100644 > --- a/drivers/net/wireless/rt2x00/rt2800lib.c > +++ b/drivers/net/wireless/rt2x00/rt2800lib.c > @@ -3356,6 +3356,13 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) > rt2800_register_write(rt2x00dev, GPIO_CTRL_CFG, reg); > } > > + /* This chip has hardware antenna diversity*/ > + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) { > + rt2800_bbp_write(rt2x00dev, 150, 0); /* Disable Antenna Software OFDM */ > + rt2800_bbp_write(rt2x00dev, 151, 0); /* Disable Antenna Software CCK */ > + rt2800_bbp_write(rt2x00dev, 154, 0); /* Clear previously selected antenna */ > + } > + > rt2800_bbp_read(rt2x00dev, 152, &value); > if (ant == 0) > rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1); > @@ -4291,6 +4298,11 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) > rt2x00dev->default_ant.rx = ANTENNA_A; > } > > + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) { > + rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; /* Unused */ > + rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; /* Unused */ > + } > + > /* > * Determine external LNA informations. > */ Regards, Anisse