Return-path: Received: from mail-wg0-f44.google.com ([74.125.82.44]:61669 "EHLO mail-wg0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757815Ab2EJJOi (ORCPT ); Thu, 10 May 2012 05:14:38 -0400 Received: by mail-wg0-f44.google.com with SMTP id dr13so1110716wgb.1 for ; Thu, 10 May 2012 02:14:38 -0700 (PDT) From: Arik Nemtsov To: Cc: Luciano Coelho , Arik Nemtsov Subject: [PATCH 04/78] wl18xx: add partition table Date: Thu, 10 May 2012 12:13:09 +0300 Message-Id: <1336641263-5761-5-git-send-email-arik@wizery.com> (sfid-20120510_111442_929865_EAA8F322) In-Reply-To: <1336641263-5761-1-git-send-email-arik@wizery.com> References: <1336641263-5761-1-git-send-email-arik@wizery.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Luciano Coelho Define and add the partition table in the wlcore struct. Signed-off-by: Luciano Coelho Signed-off-by: Arik Nemtsov --- drivers/net/wireless/ti/wl18xx/main.c | 35 +++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 3fa9298..f3a164a 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -28,6 +28,40 @@ static struct wlcore_ops wl18xx_ops = { }; +static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = { + [PART_TOP_PRCM_ELP_SOC] = { + .mem = { .start = 0x00A02000, .size = 0x00010000 }, + .reg = { .start = 0x00807000, .size = 0x00005000 }, + .mem2 = { .start = 0x00800000, .size = 0x0000B000 }, + .mem3 = { .start = 0x00000000, .size = 0x00000000 }, + }, + [PART_DOWN] = { + .mem = { .start = 0x00000000, .size = 0x00014000 }, + .reg = { .start = 0x00810000, .size = 0x0000BFFF }, + .mem2 = { .start = 0x00000000, .size = 0x00000000 }, + .mem3 = { .start = 0x00000000, .size = 0x00000000 }, + }, + [PART_BOOT] = { + .mem = { .start = 0x00700000, .size = 0x0000030c }, + .reg = { .start = 0x00802000, .size = 0x00014578 }, + .mem2 = { .start = 0x00B00404, .size = 0x00001000 }, + .mem3 = { .start = 0x00C00000, .size = 0x00000400 }, + }, + [PART_WORK] = { + .mem = { .start = 0x00800000, .size = 0x000050FC }, + .reg = { .start = 0x00B00404, .size = 0x00001000 }, + .mem2 = { .start = 0x00C00000, .size = 0x00000400 }, + .mem3 = { .start = 0x00000000, .size = 0x00000000 }, + }, + [PART_PHY_INIT] = { + /* TODO: use the phy_conf struct size here */ + .mem = { .start = 0x80926000, .size = 252 }, + .reg = { .start = 0x00000000, .size = 0x00000000 }, + .mem2 = { .start = 0x00000000, .size = 0x00000000 }, + .mem3 = { .start = 0x00000000, .size = 0x00000000 }, + }, +}; + int __devinit wl18xx_probe(struct platform_device *pdev) { struct wl1271 *wl; @@ -41,6 +75,7 @@ int __devinit wl18xx_probe(struct platform_device *pdev) wl = hw->priv; wl->ops = &wl18xx_ops; + wl->ptable = wl18xx_ptable; return wlcore_probe(wl, pdev); } -- 1.7.9.5