Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:25519 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751515Ab2FKGsl (ORCPT ); Mon, 11 Jun 2012 02:48:41 -0400 From: Rajkumar Manoharan To: CC: , Rajkumar Manoharan Subject: [PATCH v2 3/9] ath9k_hw: Fix AR9462 power consumption on idle associated Date: Mon, 11 Jun 2012 12:19:31 +0530 Message-ID: <1339397377-3374-3-git-send-email-rmanohar@qca.qualcomm.com> (sfid-20120611_084844_400844_B0EBE4EF) In-Reply-To: <1339397377-3374-1-git-send-email-rmanohar@qca.qualcomm.com> References: <1339397377-3374-1-git-send-email-rmanohar@qca.qualcomm.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: The HW statemachine is sometimes found stuck in the state WL_LNA_CTRL_DISABLE when BT is in sleep, which will cause TX_HOLD always asserted and resmgr stuck in PENDING_TX state Signed-off-by: Rajkumar Manoharan --- drivers/net/wireless/ath/ath9k/ar9003_mci.c | 34 +++++++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/ar9003_mci.h | 10 ++++++-- drivers/net/wireless/ath/ath9k/hw.c | 3 +++ 3 files changed, 45 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c index b1ced2a..13907f6 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c @@ -1404,3 +1404,37 @@ void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah) /* Force another 2g5g update at next scanning */ mci->update_2g5g = true; } + +void ar9003_mci_set_power_awake(struct ath_hw *ah) +{ + u32 btcoex_ctrl2, diag_sw; + int i; + u8 lna_ctrl, bt_sleep; + + for (i = 0; i < AH_WAIT_TIMEOUT; i++) { + btcoex_ctrl2 = REG_READ(ah, AR_BTCOEX_CTRL2); + if (btcoex_ctrl2 != 0xdeadbeef) + break; + udelay(AH_TIME_QUANTUM); + } + REG_WRITE(ah, AR_BTCOEX_CTRL2, (btcoex_ctrl2 | BIT(23))); + + for (i = 0; i < AH_WAIT_TIMEOUT; i++) { + diag_sw = REG_READ(ah, AR_DIAG_SW); + if (diag_sw != 0xdeadbeef) + break; + udelay(AH_TIME_QUANTUM); + } + REG_WRITE(ah, AR_DIAG_SW, (diag_sw | BIT(27) | BIT(19) | BIT(18))); + lna_ctrl = REG_READ(ah, AR_OBS_BUS_CTRL) & 0x3; + bt_sleep = REG_READ(ah, AR_MCI_RX_STATUS) & AR_MCI_RX_REMOTE_SLEEP; + + REG_WRITE(ah, AR_BTCOEX_CTRL2, btcoex_ctrl2); + REG_WRITE(ah, AR_DIAG_SW, diag_sw); + + if (bt_sleep && (lna_ctrl == 2)) { + REG_SET_BIT(ah, AR_BTCOEX_RC, 0x1); + REG_CLR_BIT(ah, AR_BTCOEX_RC, 0x1); + udelay(50); + } +} diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h index 10282e2..2a8c764 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h @@ -265,8 +265,6 @@ void ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf, void ar9003_mci_cleanup(struct ath_hw *ah); void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr, u32 *rx_msg_intr); -void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah); - /* * These functions are used by ath9k_hw. */ @@ -285,6 +283,8 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan, void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g, bool is_full_sleep); void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked); +void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah); +void ar9003_mci_set_power_awake(struct ath_hw *ah); #else @@ -322,6 +322,12 @@ static inline void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g, static inline void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked) { } +static inline void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah) +{ +} +static inline void ar9003_mci_set_power_awake(struct ath_hw *ah) +{ +} #endif /* CONFIG_ATH9K_BTCOEX_SUPPORT */ #endif diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 45e6700..6d89333 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2111,6 +2111,9 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah) AR_RTC_FORCE_WAKE_EN); udelay(50); + if (ath9k_hw_mci_is_enabled(ah)) + ar9003_mci_set_power_awake(ah); + for (i = POWER_UP_TIME / 50; i > 0; i--) { val = REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M; if (val == AR_RTC_STATUS_ON) -- 1.7.10.4