From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: johannes@sipsolutions.net, javier@cozybit.com,
	linville@tuxdriver.com, devel@lists.open80211s.org,
	Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Subject: [PATCH] {nl,cfg,mac}80211: add missing kernel-doc for mesh configuration structure
Date: Mon, 11 Jun 2012 11:59:10 +0800
Message-Id: <1339387150-7345-1-git-send-email-yeohchunyeow@gmail.com> (sfid-20120611_060010_948663_754049CE)
Sender: linux-wireless-owner@vger.kernel.org

Add the missing kernel-doc for mesh configuration parameters as pointed
out by Johannes Berg.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
---
 include/net/cfg80211.h |   59 +++++++++++++++++++++++++++++++++++++++--------
 1 files changed, 49 insertions(+), 10 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 7319f25..a129ee2 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -790,26 +790,69 @@ struct bss_parameters {
 	int ht_opmode;
 };
 
-/*
+/**
  * struct mesh_config - 802.11s mesh configuration
  *
  * These parameters can be changed while the mesh is active.
+ *
+ * @dot11MeshRetryTimeout: the initial retry timeout in millisecond units used
+ *	by the Mesh Peering Open message
+ * @dot11MeshConfirmTimeout: the initial retry timeout in millisecond units
+ *	used by the Mesh Peering Open message
+ * @dot11MeshHoldingTimeout: the confirm timeout in millisecond units used by
+ *	the mesh peering management to close a mesh peering
+ * @dot11MeshMaxPeerLinks: the maximum number of peer links allowed on this
+ *	mesh interface
+ * @dot11MeshMaxRetries: the maximum number of peer link open retries that can
+ *	be sent to establish a new peer link instance in a mesh
+ * @dot11MeshTTL: the value of TTL field set at a source mesh STA
+ * @element_ttl: the value of TTL field set at a mesh STA for path selection
+ *	elements
+ * @auto_open_plinks: whether we should automatically open peer links when we
+ *	detect compatible mesh peers
+ * @dot11MeshNbrOffsetMaxNeighbor: the maximum number of neighbors to
+ *	synchronize to for 11s default synchronization method
+ * @dot11MeshHWMPmaxPREQretries: the number of action frames containing a PREQ
+ *	that an originator mesh STA can send to a particular path target
+ * @path_refresh_time: how frequently to refresh mesh paths in milliseconds
+ * @min_discovery_timeout: the minimum length of time to wait until giving up on
+ *	a path discovery in milliseconds
+ * @dot11MeshHWMPactivePathTimeout: the time (in TUs) for which mesh STAs
+ *	receiving a PREQ shall consider the forwarding information from the
+ *	root to be valid. (TU = time unit)
+ * @dot11MeshHWMPpreqMinInterval: the minimum interval of time (in TUs) during
+ *	which a mesh STA can send only one action frame containing a PREQ
+ *	element
+ * @dot11MeshHWMPperrMinInterval: the minimum interval of time (in TUs) during
+ *	which a mesh STA can send only one Action frame containing a PERR
+ *	element
+ * @dot11MeshHWMPnetDiameterTraversalTime: the interval of time (in TUs) that
+ *	it takes for an HWMP information element to propagate across the mesh
+ * @dot11MeshHWMPRootMode: the configuration of a mesh STA as root mesh STA
+ * @dot11MeshHWMPRannInterval: the interval of time (in TUs) between root
+ *	announcements are transmitted
+ * @dot11MeshGateAnnouncementProtocol: whether to advertise that this mesh
+ *	station has access to a broader network beyond the MBSS. (This is
+ *	missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol set to true
+ *	only means that the station will announce others it's a mesh gate, but
+ *	not necessarily using the gate announcement protocol. Still keeping the
+ *	same nomenclature to be in sync with the spec)
+ * @dot11MeshForwarding: whether the Mesh STA is forwarding or non-forwarding
+ *	entity (default is TRUE - forwarding entity)
+ * @rssi_threshold: the threshold for average signal strength of candidate
+ *	station to establish a peer link
+ * @ht_opmode: mesh HT protection mode
  */
 struct mesh_config {
-	/* Timeouts in ms */
-	/* Mesh plink management parameters */
 	u16 dot11MeshRetryTimeout;
 	u16 dot11MeshConfirmTimeout;
 	u16 dot11MeshHoldingTimeout;
 	u16 dot11MeshMaxPeerLinks;
 	u8  dot11MeshMaxRetries;
 	u8  dot11MeshTTL;
-	/* ttl used in path selection information elements */
 	u8  element_ttl;
 	bool auto_open_plinks;
-	/* neighbor offset synchronization */
 	u32 dot11MeshNbrOffsetMaxNeighbor;
-	/* HWMP parameters */
 	u8  dot11MeshHWMPmaxPREQretries;
 	u32 path_refresh_time;
 	u16 min_discovery_timeout;
@@ -819,10 +862,6 @@ struct mesh_config {
 	u16 dot11MeshHWMPnetDiameterTraversalTime;
 	u8  dot11MeshHWMPRootMode;
 	u16 dot11MeshHWMPRannInterval;
-	/* This is missnamed in draft 12.0: dot11MeshGateAnnouncementProtocol
-	 * set to true only means that the station will announce others it's a
-	 * mesh gate, but not necessarily using the gate announcement protocol.
-	 * Still keeping the same nomenclature to be in sync with the spec. */
 	bool  dot11MeshGateAnnouncementProtocol;
 	bool dot11MeshForwarding;
 	s32 rssi_threshold;
-- 
1.7.0.4