Return-path: Received: from nbd.name ([46.4.11.11]:51617 "EHLO nbd.name" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751350Ab2GZK2K (ORCPT ); Thu, 26 Jul 2012 06:28:10 -0400 Message-ID: <50111BB3.9090802@openwrt.org> (sfid-20120726_122814_505705_D3CED753) Date: Thu, 26 Jul 2012 12:28:03 +0200 From: Felix Fietkau MIME-Version: 1.0 To: Nick Kossifidis CC: Thomas Huehn , jirislaby@gmail.com, johannes.berg@intel.com, ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org, linville@tuxdriver.com Subject: Re: [ath5k-devel] [PATCH 2/2] ath5k: fix phy_init() to respect user txpower changes References: <1343059275-49590-1-git-send-email-thomas@net.t-labs.tu-berlin.de> <1343059275-49590-3-git-send-email-thomas@net.t-labs.tu-berlin.de> <50107C35.9050807@net.t-labs.tu-berlin.de> <501083F6.8060002@net.t-labs.tu-berlin.de> In-Reply-To: Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: On 2012-07-26 12:20 PM, Nick Kossifidis wrote: > 2012/7/26 Thomas Huehn : >> Hi Nick, >> >> Nick Kossifidis schrieb: >> >>> 2012/7/26 Thomas Huehn : >> >>> There is nothing in your patch that suggests that's related to this. >>> Anyway there's a simple way to fix this: >>> >>> Just move this: >>> >>> 3575 /* Min/max in 0.25dB units */ >>> 3576 ah->ah_txpower.txp_min_pwr = 2 * rates[7]; >>> 3577 ah->ah_txpower.txp_cur_pwr = 2 * rates[0]; >>> 3578 ah->ah_txpower.txp_ofdm = rates[7]; >>> >>> above the for loop and you are done. >>> >>> Note rates[i] don't hold tx power values, they hold indices to the >>> channel powertable. >>> >> >> >> Are you agreeing that current ath5k txpower handling set from user space >> is not working and we need to fix it ? > > Is that a rhetorical question ? Just check out the TODOs on wireless.kernel.org. > > The current code does not preserve the tx power value across resets, > thats the problem and the change I mentioned above fixes it (patch on > the way, it's just that where I am right now I don't have bw to > download wireless-testing) but other than that when we set tx power > without reseting at least it does what it's supposed to do (and the > result is the same with madwifi, using a spectrum analyzer or another > client/monitor interface you see some power levels supported or only > the max txpower supported, it's really up to the vendor, not all of > them follow Atheros's reference designs). Your patch passes 1dbm units > on a function that expects 0.5dbm units, you fix the problem with > preserving tx power but you break the tx power setting. > > The change I mentioned above fixes the problem without introducing new > variables just because "Felix will use the other one", I don't > understand why you have a problem with that and why you think I don't > want this to get fixed... > >> Beside that, what about a channel switch and wrongly re-use txp_cur_pwr >> on a channel witch other max power levels ? > > That won't be a problem, when channel changes we 'll call > > reset -> phy_init -> set_txpower -> (calibration) -> set rate target power > > and then it's going to get limited before it's written on hw here: > > max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max_pwr) / 2; > > txp_max_pwr is initialized on calibration (the max power for this > channel), then it gets limited by CTL edge information on EEPROM, then > by max_pwr and then max_pwr is limited by rate_info->target_power_X > from EEPROM to create rates[i]. We write rates[i] on hw, not > txp_cur_pwr. I think it's a bad idea to store the user's choice of txpower in a variable that internally gets reused to store the hw limit. Even when the offset isn't added to it, it's still fragile. A problem with this is that different channels have different max power values, so if you switch to a channel with a lower power, and then switch back (without explicitly changing txpower inbetween), don't you then end up with less power than you configured? This can be easily avoided by storing the user's txpower choice separately from the actual hw limit... - Felix