Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:10628 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751238Ab2GHHVx (ORCPT ); Sun, 8 Jul 2012 03:21:53 -0400 From: Rajkumar Manoharan To: CC: , Rajkumar Manoharan Subject: [PATCH] ath9k_hw: remove debugging masks from AR_MCI_INTERRUPT_RX_MSG_DEFAULT Date: Sun, 8 Jul 2012 12:53:16 +0530 Message-ID: <1341732196-2869-1-git-send-email-rmanohar@qca.qualcomm.com> (sfid-20120708_092234_517130_A7002362) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: Remove the CONT_* and LNA_* messages from AR_MCI_INTERRUPT_RX_MSG_DEFAULT. Those MCI rx messages only meant for debugging purpose. Including them in default rx_msg series could raise huge amount of MCI interrupts when BT traffic is going on. And also it increases power consumption when WLAN is scanning. Signed-off-by: Rajkumar Manoharan --- drivers/net/wireless/ath/ath9k/reg.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 22d2413..6592c07 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -2081,12 +2081,6 @@ enum { AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET| \ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING | \ AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING| \ - AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO | \ - AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL | \ - AR_MCI_INTERRUPT_RX_MSG_LNA_INFO | \ - AR_MCI_INTERRUPT_RX_MSG_CONT_NACK | \ - AR_MCI_INTERRUPT_RX_MSG_CONT_INFO | \ - AR_MCI_INTERRUPT_RX_MSG_CONT_RST | \ AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE) #define AR_MCI_CPU_INT 0x1840 -- 1.7.11.1