Return-path: Received: from cpsmtpb-ews09.kpnxchange.com ([213.75.39.14]:3358 "EHLO cpsmtpb-ews09.kpnxchange.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752350Ab2H3VEf (ORCPT ); Thu, 30 Aug 2012 17:04:35 -0400 From: Gertjan van Wingerde To: , "John W. Linville" Cc: , Ivo van Doorn , Helmut Schaa , Gertjan van Wingerde , Subject: [PATCH 10/17] rt2x00: Fix rt2500usb rfkill polling prior to interface start. Date: Thu, 30 Aug 2012 23:04:19 +0200 Message-Id: <1346360670-6498-2-git-send-email-gwingerde@gmail.com> (sfid-20120830_230504_980085_E88DFC49) In-Reply-To: <1346360670-6498-1-git-send-email-gwingerde@gmail.com> References: <1346355248-5331-10-git-send-email-gwingerde@gmail.com> <1346360670-6498-1-git-send-email-gwingerde@gmail.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: We need to program the rfkill switch GPIO pin direction to input at device initialization time, not only when the interface is brought up. Doing this only when the interface is brought up could lead to rfkill detecting the switch is turned on erroneously and inability to create the interface and bringing it up. Signed-off-by: Gertjan van Wingerde Cc: diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 5742ce9..f95b551 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1768,6 +1768,7 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u16 reg; /* * Allocate eeprom data. @@ -1781,6 +1782,14 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) return retval; /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®); + rt2x00_set_field16(®, MAC_CSR19_DIR0, 0); + rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg); + + /* * Initialize hw specifications. */ retval = rt2500usb_probe_hw_mode(rt2x00dev); -- 1.7.11.1