Message-ID: <5062EBCE.70700@lenbrook.com> (sfid-20120926_134939_488998_DD388808)
Date: Wed, 26 Sep 2012 07:49:34 -0400
From: Jonathan Bagg <jbagg@lenbrook.com>
MIME-Version: 1.0
To: Ben Gray <ben.r.gray@gmail.com>
CC: linux-wireless@vger.kernel.org, ath6kl-devel@qualcomm.com
Subject: Re: ath6kl ar6004/ar9374 (hw 1.3) WPA/WPA2 supported ?
References: <5062E0CB.6040308@gmail.com>
In-Reply-To: <5062E0CB.6040308@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Sender: linux-wireless-owner@vger.kernel.org

I've had the same experience, I can connect with iw, but not with 
wpa_supplicant with wpa.  I also couldn't get higher than 65Mbps, MCS7 
(other devices on the same router will go faster).  I'm probably the 
other post you mentioned.

Jon

On 12-09-26 07:02 AM, Ben Gray wrote:
> Hi,
>
>     I have a bunch of UB134 USB dongles which have a ath6kl chip with 
> H/W version 0x31c8088a, I'm trying to get them to work with the ath6kl 
> driver from the compat-wireless-3.6-rc5-1 package. I've applied this 
> (https://patchwork.kernel.org/patch/1203191/) patch to the source and 
> pulled the hw1.3 firmware from the linux-firmware git.
>
>     The driver works as far as it can scan AP's and connect to 
> unencrypted networks, however WPA/WPA2 doesn't work when I run 
> wpa_supplicant. I realise "WPA doesn't work" is a bit vague, and I can 
> post the wpa_supplicant and driver logs if that helps, but I've seen 
> another post which says they couldn't get WPA to work either, so I'd 
> like to know if this is a known issue with the driver and/or firmware? 
> Has anyone had any luck getting WPA/WPA2 working with ath6kl hw1.3 ?
>
>     If this is a known issue does anyone know when it might be fixed ?
>
>
> Thanks in advance,
> Ben.
>
> -- 
> To unsubscribe from this list: send the line "unsubscribe 
> linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html