Return-path: Received: from mail-ie0-f174.google.com ([209.85.223.174]:56057 "EHLO mail-ie0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933142Ab2J2Vom (ORCPT ); Mon, 29 Oct 2012 17:44:42 -0400 Received: by mail-ie0-f174.google.com with SMTP id k13so7312454iea.19 for ; Mon, 29 Oct 2012 14:44:41 -0700 (PDT) Message-ID: <508EF8C6.20305@lwfinger.net> (sfid-20121029_224451_850943_2220699C) Date: Mon, 29 Oct 2012 16:44:38 -0500 From: Larry Finger MIME-Version: 1.0 To: Christian Lamparter CC: Albert Pool , chaoming_li@realsil.com.cn, linux-wireless@vger.kernel.org, devel@linuxdriverproject.org Subject: Re: Unknown Realtek USB device References: <508EB140.5010102@solcon.nl> <201210291820.03101.chunkeey@googlemail.com> In-Reply-To: <201210291820.03101.chunkeey@googlemail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 10/29/2012 12:20 PM, Christian Lamparter wrote: > On Monday, October 29, 2012 05:39:28 PM Albert Pool wrote: >> Can any of you help me identify the Realtek chip in this device so that the USB ID can be added to the right driver? >> It's a 802.11n USB nano dongle from ISY. I only have the dongle for short time, so I may not be able to test it >> myself if it takes some time. usb-devices and lsusb -v output is attached. > > Is it a ISY IWL 2000 device? Then it could be supported by rtl8192cu: > > > > Note: > you'll have to have to correct firmware in place as well. Either > you have to install a realtek firmware package (rtlwifi) for your > distro... Or download it manually (filename: rtlwifi/rtl8192cufw.bin > ) > and put it into the correct place (/lib/firmware/(rtlwifi)) > > Regards, > Chr > --- > diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c > index 9970c2b..d4338fd 100644 > --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c > +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c > @@ -297,6 +297,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = { > /*=== Customer ID ===*/ > /****** 8188CU ********/ > {RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/ > + {RTL_USB_DEVICE(0x050d, 0x11f2, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/ > {RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/ > {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/ > {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/ You also need a kernel 2.6.39 or newer. If you have one older that 3.4, I would suggest using compat-wireless. Larry