Return-path: Received: from mail-la0-f46.google.com ([209.85.215.46]:56688 "EHLO mail-la0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932223Ab2JWSeL (ORCPT ); Tue, 23 Oct 2012 14:34:11 -0400 Received: by mail-la0-f46.google.com with SMTP id h6so2541637lag.19 for ; Tue, 23 Oct 2012 11:34:10 -0700 (PDT) From: Pontus Fuchs To: linville@tuxdriver.com Cc: linux-wireless@vger.kernel.org, hch@lst.de, s.L-H@gmx.de, Pontus Fuchs Subject: [PATCH v3 1/4] ar5523: Add main driver file Date: Tue, 23 Oct 2012 20:33:57 +0200 Message-Id: <1351017240-2797-2-git-send-email-pontus.fuchs@gmail.com> (sfid-20121023_203425_385076_53F67247) In-Reply-To: <1351017240-2797-1-git-send-email-pontus.fuchs@gmail.com> References: <1351017240-2797-1-git-send-email-pontus.fuchs@gmail.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: This driver is for the AR5523 chipset from Atheros. It was created in 2007 by Christoph Hellwig but it was never finished. I found it a couple of months ago and after some polishing it's working pretty fine. The driver was written with the FreeBSD driver (uath) as reference, which was written with the reverse-engineered windows driver as reference, hence the feature set is very limited. Station mode only, no HW crypto offload. Signed-off-by: Pontus Fuchs --- drivers/net/wireless/ath/ar5523/ar5523.c | 1806 ++++++++++++++++++++++++++++++ 1 file changed, 1806 insertions(+) create mode 100644 drivers/net/wireless/ath/ar5523/ar5523.c diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c new file mode 100644 index 0000000..f782b6e --- /dev/null +++ b/drivers/net/wireless/ath/ar5523/ar5523.c @@ -0,0 +1,1806 @@ +/* + * Copyright (c) 2006 Damien Bergamini + * Copyright (c) 2006 Sam Leffler, Errno Consulting + * Copyright (c) 2007 Christoph Hellwig + * Copyright (c) 2008-2009 Weongyo Jeong + * Copyright (c) 2012 Pontus Fuchs + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +/* + * This driver is based on the uath driver written by Damien Bergamini for + * OpenBSD, who did black-box analysis of the Windows binary driver to find + * out how the hardware works. It contains a lot magic numbers because of + * that and only has minimal functionality. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ar5523.h" +#include "ar5523_hw.h" + +/* + * Various supported device vendors/products. + * UB51: AR5005UG 802.11b/g, UB52: AR5005UX 802.11a/b/g + */ + +static int ar5523_submit_rx_cmd(struct ar5523 *ar); +static void ar5523_data_tx_pkt_put(struct ar5523 *ar); + +static void ar5523_read_reply(struct ar5523 *ar, struct ar5523_cmd_hdr *hdr, + struct ar5523_tx_cmd *cmd) +{ + int dlen, olen; + u32 *rp; + + dlen = hdr->len - sizeof(*hdr); + + if (dlen < 0) { + WARN_ON(1); + goto out; + } + + ar5523_dbg(ar, "Code = %d len = %d\n", hdr->code & 0xff, dlen); + + rp = (u32 *)(hdr + 1); + if (dlen >= sizeof(u32)) { + olen = be32_to_cpu(rp[0]); + dlen -= sizeof(u32); + if (olen == 0) { + /* convention is 0 =>'s one word */ + olen = sizeof(u32); + } + } else + olen = 0; + + if (cmd->odata) { + if (cmd->olen < olen) { + ar5523_err(ar, "olen to small %d < %d\n", + cmd->olen, olen); + cmd->olen = 0; + cmd->res = -EOVERFLOW; + } else { + cmd->olen = olen; + memcpy(cmd->odata, &rp[1], olen); + cmd->res = 0; + } + } + +out: + complete(&cmd->done); +} + +static void ar5523_cmd_rx_cb(struct urb *urb) +{ + struct ar5523 *ar = urb->context; + struct ar5523_tx_cmd *cmd = &ar->tx_cmd; + struct ar5523_cmd_hdr *hdr = ar->rx_cmd_buf; + int dlen; + + if (urb->status) { + if (urb->status != -ESHUTDOWN) + ar5523_err(ar, "RX USB error %d.\n", urb->status); + goto skip; + } + + if (urb->actual_length < sizeof(struct ar5523_cmd_hdr)) { + ar5523_err(ar, "RX USB to short.\n"); + goto skip; + } + + ar5523_dbg(ar, "%s code %02x priv %d\n", __func__, + be32_to_cpu(hdr->code) & 0xff, hdr->priv); + + hdr->code = be32_to_cpu(hdr->code); + hdr->len = be32_to_cpu(hdr->len); + + switch (hdr->code & 0xff) { + default: + /* reply to a read command */ + if (hdr->priv != AR5523_CMD_ID) { + ar5523_err(ar, "Unexpected command id: %02x\n", + hdr->code & 0xff); + goto skip; + } + ar5523_read_reply(ar, hdr, cmd); + break; + + case WDCMSG_DEVICE_AVAIL: + ar5523_dbg(ar, "WDCMSG_DEVICE_AVAIL\n"); + cmd->res = 0; + cmd->olen = 0; + complete(&cmd->done); + break; + + case WDCMSG_SEND_COMPLETE: + ar5523_dbg(ar, "WDCMSG_SEND_COMPLETE: %d pending\n", + atomic_read(&ar->tx_nr_pending)); + if (!test_bit(AR5523_HW_UP, &ar->flags)) + ar5523_dbg(ar, "Unexpected WDCMSG_SEND_COMPLETE\n"); + else { + mod_timer(&ar->tx_wd_timer, + jiffies + AR5523_TX_WD_TIMEOUT); + ar5523_data_tx_pkt_put(ar); + + } + break; + + case WDCMSG_TARGET_START: + /* This command returns a bogus id so it needs special + handling */ + dlen = hdr->len - sizeof(*hdr); + if (dlen != (int)sizeof(u32)) { + ar5523_err(ar, "Invalid reply to WDCMSG_TARGET_START"); + return; + } + memcpy(cmd->odata, hdr + 1, sizeof(u32)); + cmd->olen = sizeof(u32); + cmd->res = 0; + complete(&cmd->done); + break; + + case WDCMSG_STATS_UPDATE: + ar5523_dbg(ar, "WDCMSG_STATS_UPDATE\n"); + break; + } + +skip: + ar5523_submit_rx_cmd(ar); +} + +static int ar5523_alloc_rx_cmd(struct ar5523 *ar) +{ + ar->rx_cmd_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ar->rx_cmd_urb) + return -ENOMEM; + + ar->rx_cmd_buf = usb_alloc_coherent(ar->dev, AR5523_MAX_RXCMDSZ, + GFP_KERNEL, + &ar->rx_cmd_urb->transfer_dma); + if (!ar->rx_cmd_buf) { + usb_free_urb(ar->rx_cmd_urb); + return -ENOMEM; + } + return 0; +} + +static void ar5523_cancel_rx_cmd(struct ar5523 *ar) +{ + usb_kill_urb(ar->rx_cmd_urb); +} + +static void ar5523_free_rx_cmd(struct ar5523 *ar) +{ + usb_free_coherent(ar->dev, AR5523_MAX_RXCMDSZ, + ar->rx_cmd_buf, ar->rx_cmd_urb->transfer_dma); + usb_free_urb(ar->rx_cmd_urb); +} + +static int ar5523_submit_rx_cmd(struct ar5523 *ar) +{ + int error; + + usb_fill_bulk_urb(ar->rx_cmd_urb, ar->dev, + ar5523_cmd_rx_pipe(ar->dev), ar->rx_cmd_buf, + AR5523_MAX_RXCMDSZ, ar5523_cmd_rx_cb, ar); + ar->rx_cmd_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + error = usb_submit_urb(ar->rx_cmd_urb, GFP_ATOMIC); + if (error) { + if (error != -ENODEV) + ar5523_err(ar, "error %d when submitting rx urb\n", + error); + return error; + } + return 0; +} + +/* + * Command submitted cb + */ +static void ar5523_cmd_tx_cb(struct urb *urb) +{ + struct ar5523_tx_cmd *cmd = urb->context; + struct ar5523 *ar = cmd->ar; + + if (urb->status) { + ar5523_err(ar, "Failed to TX command. Status = %d\n", + urb->status); + cmd->res = urb->status; + complete(&cmd->done); + return; + } + + if (!(cmd->flags & AR5523_CMD_FLAG_READ)) { + cmd->res = 0; + complete(&cmd->done); + } +} + +static int ar5523_cmd(struct ar5523 *ar, u32 code, const void *idata, + int ilen, void *odata, int olen, int flags) +{ + struct ar5523_cmd_hdr *hdr; + struct ar5523_tx_cmd *cmd = &ar->tx_cmd; + int xferlen, error; + + /* always bulk-out a multiple of 4 bytes */ + xferlen = (sizeof(struct ar5523_cmd_hdr) + ilen + 3) & ~3; + + hdr = (struct ar5523_cmd_hdr *)cmd->buf_tx; + memset(hdr, 0, sizeof(struct ar5523_cmd_hdr)); + hdr->len = cpu_to_be32(xferlen); + hdr->code = cpu_to_be32(code); + hdr->priv = AR5523_CMD_ID; + + if (flags & AR5523_CMD_FLAG_MAGIC) + hdr->magic = cpu_to_be32(1 << 24); + memcpy(hdr + 1, idata, ilen); + + cmd->odata = odata; + cmd->olen = olen; + cmd->flags = flags; + + ar5523_dbg(ar, "do cmd %02x\n", code); + + usb_fill_bulk_urb(cmd->urb_tx, ar->dev, ar5523_cmd_tx_pipe(ar->dev), + cmd->buf_tx, xferlen, ar5523_cmd_tx_cb, cmd); + cmd->urb_tx->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + error = usb_submit_urb(cmd->urb_tx, GFP_KERNEL); + if (error) { + ar5523_err(ar, "could not send command 0x%x, error=%d\n", + code, error); + return error; + } + + if (!wait_for_completion_timeout(&cmd->done, 2 * HZ)) { + cmd->odata = NULL; + ar5523_err(ar, "timeout waiting for command %02x reply\n", + code); + cmd->res = -ETIMEDOUT; + } + return cmd->res; +} + +static int ar5523_cmd_write(struct ar5523 *ar, u32 code, const void *data, + int len, int flags) +{ + flags &= ~AR5523_CMD_FLAG_READ; + return ar5523_cmd(ar, code, data, len, NULL, 0, flags); +} + +static int ar5523_cmd_read(struct ar5523 *ar, u32 code, const void *idata, + int ilen, void *odata, int olen, int flags) +{ + flags |= AR5523_CMD_FLAG_READ; + return ar5523_cmd(ar, code, idata, ilen, odata, olen, flags); +} + +static int ar5523_config(struct ar5523 *ar, u32 reg, u32 val) +{ + struct ar5523_write_mac write; + int error; + + write.reg = cpu_to_be32(reg); + write.len = cpu_to_be32(0); /* 0 = single write */ + *(u32 *)write.data = cpu_to_be32(val); + + error = ar5523_cmd_write(ar, WDCMSG_TARGET_SET_CONFIG, &write, + 3 * sizeof(u32), 0); + if (error != 0) + ar5523_err(ar, "could not write register 0x%02x\n", reg); + return error; +} + +static int ar5523_config_multi(struct ar5523 *ar, u32 reg, const void *data, + int len) +{ + struct ar5523_write_mac write; + int error; + + write.reg = cpu_to_be32(reg); + write.len = cpu_to_be32(len); + memcpy(write.data, data, len); + + /* properly handle the case where len is zero (reset) */ + error = ar5523_cmd_write(ar, WDCMSG_TARGET_SET_CONFIG, &write, + (len == 0) ? sizeof(u32) : 2 * sizeof(u32) + len, 0); + if (error != 0) + ar5523_err(ar, "could not write %d bytes to register 0x%02x\n", + len, reg); + return error; +} + +static int ar5523_get_status(struct ar5523 *ar, u32 which, void *odata, + int olen) +{ + int error; + + which = cpu_to_be32(which); + error = ar5523_cmd_read(ar, WDCMSG_TARGET_GET_STATUS, + &which, sizeof(which), odata, olen, AR5523_CMD_FLAG_MAGIC); + if (error != 0) + ar5523_err(ar, "could not read EEPROM offset 0x%02x\n", + be32_to_cpu(which)); + return error; +} + +static int ar5523_get_capability(struct ar5523 *ar, u32 cap, u32 *val) +{ + int error; + + cap = cpu_to_be32(cap); + error = ar5523_cmd_read(ar, WDCMSG_TARGET_GET_CAPABILITY, + &cap, sizeof(cap), val, sizeof(u32), AR5523_CMD_FLAG_MAGIC); + if (error != 0) { + ar5523_err(ar, "could not read capability %u\n", + be32_to_cpu(cap)); + return error; + } + *val = be32_to_cpu(*val); + return error; +} + +static int ar5523_get_devcap(struct ar5523 *ar) +{ +#define GETCAP(x) do { \ + error = ar5523_get_capability(ar, x, &cap); \ + if (error != 0) \ + return error; \ + ar5523_info(ar, "Cap: " \ + "%s=0x%08x\n", #x, cap); \ +} while (0) + int error; + u32 cap; + + /* collect device capabilities */ + GETCAP(CAP_TARGET_VERSION); + GETCAP(CAP_TARGET_REVISION); + GETCAP(CAP_MAC_VERSION); + GETCAP(CAP_MAC_REVISION); + GETCAP(CAP_PHY_REVISION); + GETCAP(CAP_ANALOG_5GHz_REVISION); + GETCAP(CAP_ANALOG_2GHz_REVISION); + + GETCAP(CAP_REG_DOMAIN); + GETCAP(CAP_REG_CAP_BITS); + GETCAP(CAP_WIRELESS_MODES); + GETCAP(CAP_CHAN_SPREAD_SUPPORT); + GETCAP(CAP_COMPRESS_SUPPORT); + GETCAP(CAP_BURST_SUPPORT); + GETCAP(CAP_FAST_FRAMES_SUPPORT); + GETCAP(CAP_CHAP_TUNING_SUPPORT); + GETCAP(CAP_TURBOG_SUPPORT); + GETCAP(CAP_TURBO_PRIME_SUPPORT); + GETCAP(CAP_DEVICE_TYPE); + GETCAP(CAP_WME_SUPPORT); + GETCAP(CAP_TOTAL_QUEUES); + GETCAP(CAP_CONNECTION_ID_MAX); + + GETCAP(CAP_LOW_5GHZ_CHAN); + GETCAP(CAP_HIGH_5GHZ_CHAN); + GETCAP(CAP_LOW_2GHZ_CHAN); + GETCAP(CAP_HIGH_2GHZ_CHAN); + GETCAP(CAP_TWICE_ANTENNAGAIN_5G); + GETCAP(CAP_TWICE_ANTENNAGAIN_2G); + + GETCAP(CAP_CIPHER_AES_CCM); + GETCAP(CAP_CIPHER_TKIP); + GETCAP(CAP_MIC_TKIP); + return 0; +} + +static int ar5523_set_ledsteady(struct ar5523 *ar, int lednum, int ledmode) +{ + struct ar5523_cmd_ledsteady led; + + led.lednum = cpu_to_be32(lednum); + led.ledmode = cpu_to_be32(ledmode); + + ar5523_dbg(ar, "set %s led %s (steady)\n", + (lednum == UATH_LED_LINK) ? "link" : "activity", + ledmode ? "on" : "off"); + return ar5523_cmd_write(ar, WDCMSG_SET_LED_STEADY, &led, sizeof(led), + 0); +} + +static int ar5523_set_rxfilter(struct ar5523 *ar, u32 bits, u32 op) +{ + struct ar5523_cmd_rx_filter rxfilter; + + rxfilter.bits = cpu_to_be32(bits); + rxfilter.op = cpu_to_be32(op); + + ar5523_dbg(ar, "setting Rx filter=0x%x flags=0x%x\n", bits, op); + return ar5523_cmd_write(ar, WDCMSG_RX_FILTER, &rxfilter, + sizeof(rxfilter), 0); +} + +static int ar5523_reset_tx_queues(struct ar5523 *ar) +{ + __be32 qid = cpu_to_be32(0); + + ar5523_dbg(ar, "resetting Tx queue\n"); + return ar5523_cmd_write(ar, WDCMSG_RELEASE_TX_QUEUE, + &qid, sizeof(qid), 0); +} + +static int ar5523_set_chan(struct ar5523 *ar) +{ + struct ieee80211_conf *conf = &ar->hw->conf; + + struct ar5523_cmd_reset reset; + + memset(&reset, 0, sizeof(reset)); + reset.flags |= cpu_to_be32(UATH_CHAN_2GHZ); + reset.flags |= cpu_to_be32(UATH_CHAN_OFDM); + reset.freq = cpu_to_be32(conf->channel->center_freq); + reset.maxrdpower = cpu_to_be32(50); /* XXX */ + reset.channelchange = cpu_to_be32(1); + reset.keeprccontent = cpu_to_be32(0); + + ar5523_dbg(ar, "set chan flags 0x%x freq %d\n", + be32_to_cpu(reset.flags), + conf->channel->center_freq); + return ar5523_cmd_write(ar, WDCMSG_RESET, &reset, sizeof(reset), 0); +} + +static int ar5523_queue_init(struct ar5523 *ar) +{ + struct ar5523_cmd_txq_setup qinfo; + + ar5523_dbg(ar, "setting up Tx queue\n"); + qinfo.qid = cpu_to_be32(0); + qinfo.len = cpu_to_be32(sizeof(qinfo.attr)); + qinfo.attr.priority = cpu_to_be32(0); /* XXX */ + qinfo.attr.aifs = cpu_to_be32(3); + qinfo.attr.logcwmin = cpu_to_be32(4); + qinfo.attr.logcwmax = cpu_to_be32(10); + qinfo.attr.bursttime = cpu_to_be32(0); + qinfo.attr.mode = cpu_to_be32(0); + qinfo.attr.qflags = cpu_to_be32(1); /* XXX? */ + return ar5523_cmd_write(ar, WDCMSG_SETUP_TX_QUEUE, &qinfo, + sizeof(qinfo), 0); +} + +static int ar5523_switch_chan(struct ar5523 *ar) +{ + int error; + + error = ar5523_set_chan(ar); + if (error) { + ar5523_err(ar, "could not set chan, error %d\n", error); + goto out_err; + } + + /* reset Tx rings */ + error = ar5523_reset_tx_queues(ar); + if (error) { + ar5523_err(ar, "could not reset Tx queues, error %d\n", + error); + goto out_err; + } + /* set Tx rings WME properties */ + error = ar5523_queue_init(ar); + if (error) + ar5523_err(ar, "could not init wme, error %d\n", error); + +out_err: + return error; +} + +static void ar5523_rx_data_put(struct ar5523 *ar, + struct ar5523_rx_data *data) +{ + unsigned long flags; + spin_lock_irqsave(&ar->rx_data_list_lock, flags); + list_move(&data->list, &ar->rx_data_free); + spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); +} + +static void ar5523_data_rx_cb(struct urb *urb) +{ + struct ar5523_rx_data *data = urb->context; + struct ar5523 *ar = data->ar; + struct ar5523_rx_desc *desc; + struct ar5523_chunk *chunk; + struct ieee80211_hw *hw = ar->hw; + struct ieee80211_rx_status *rx_status; + u32 rxlen; + int usblen = urb->actual_length; + int hdrlen, pad; + + ar5523_dbg(ar, "%s\n", __func__); + /* sync/async unlink faults aren't errors */ + if (urb->status) { + if (urb->status != -ESHUTDOWN) + ar5523_err(ar, "%s: USB err: %d\n", __func__, + urb->status); + goto skip; + } + + if (usblen < AR5523_MIN_RXBUFSZ) { + ar5523_err(ar, "RX: wrong xfer size (usblen=%d)\n", usblen); + goto skip; + } + + chunk = (struct ar5523_chunk *) data->skb->data; + + if (((chunk->flags & UATH_CFLAGS_FINAL) == 0) || + chunk->seqnum != 0) { + ar5523_dbg(ar, "RX: No final flag. s: %d f: %02x l: %d\n", + chunk->seqnum, chunk->flags, + be16_to_cpu(chunk->length)); + goto skip; + } + + /* Rx descriptor is located at the end, 32-bit aligned */ + desc = (struct ar5523_rx_desc *) + (data->skb->data + usblen - sizeof(struct ar5523_rx_desc)); + + rxlen = be32_to_cpu(desc->len); + if (rxlen > ar->rxbufsz) { + ar5523_dbg(ar, "RX: Bad descriptor (len=%d)\n", + be32_to_cpu(desc->len)); + goto skip; + } + + if (!rxlen) { + ar5523_dbg(ar, "RX: rxlen is 0\n"); + goto skip; + } + + if (be32_to_cpu(desc->status) != 0) { + ar5523_dbg(ar, "Bad RX status (0x%x len = %d). Skip\n", + be32_to_cpu(desc->status), be32_to_cpu(desc->len)); + goto skip; + } + + skb_reserve(data->skb, sizeof(*chunk)); + skb_put(data->skb, rxlen - sizeof(struct ar5523_rx_desc)); + + hdrlen = ieee80211_get_hdrlen_from_skb(data->skb); + if (!IS_ALIGNED(hdrlen, 4)) { + ar5523_dbg(ar, "eek, alignment workaround activated\n"); + pad = ALIGN(hdrlen, 4) - hdrlen; + memmove(data->skb->data + pad, data->skb->data, hdrlen); + skb_pull(data->skb, pad); + skb_put(data->skb, pad); + } + + rx_status = IEEE80211_SKB_RXCB(data->skb); + memset(rx_status, 0, sizeof(*rx_status)); + rx_status->freq = be32_to_cpu(desc->channel); + rx_status->band = hw->conf.channel->band; + rx_status->signal = -95 + be32_to_cpu(desc->rssi); + + ieee80211_rx_irqsafe(hw, data->skb); + data->skb = NULL; + +skip: + if (data->skb) { + dev_kfree_skb_irq(data->skb); + data->skb = NULL; + } + + ar5523_rx_data_put(ar, data); + if (atomic_inc_return(&ar->rx_data_free_cnt) >= + AR5523_RX_DATA_REFILL_COUNT && + test_bit(AR5523_HW_UP, &ar->flags)) + queue_work(ar->wq, &ar->rx_refill_work); +} + +static void ar5523_rx_refill_work(struct work_struct *work) +{ + struct ar5523 *ar = container_of(work, struct ar5523, rx_refill_work); + struct ar5523_rx_data *data; + unsigned long flags; + int error; + + ar5523_dbg(ar, "%s\n", __func__); + do { + spin_lock_irqsave(&ar->rx_data_list_lock, flags); + + if (!list_empty(&ar->rx_data_free)) + data = (struct ar5523_rx_data *) ar->rx_data_free.next; + else + data = NULL; + spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); + + if (!data) + goto done; + + data->skb = alloc_skb(ar->rxbufsz, GFP_KERNEL); + if (!data->skb) { + ar5523_err(ar, "could not allocate rx skbuff\n"); + return; + } + + usb_fill_bulk_urb(data->urb, ar->dev, + ar5523_data_rx_pipe(ar->dev), data->skb->data, + ar->rxbufsz, ar5523_data_rx_cb, data); + + spin_lock_irqsave(&ar->rx_data_list_lock, flags); + list_move(&data->list, &ar->rx_data_used); + spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); + atomic_dec(&ar->rx_data_free_cnt); + + error = usb_submit_urb(data->urb, GFP_KERNEL); + if (error) { + kfree_skb(data->skb); + if (error != -ENODEV) + ar5523_err(ar, "Err sending rx data urb %d\n", + error); + ar5523_rx_data_put(ar, data); + atomic_inc(&ar->rx_data_free_cnt); + return; + } + + } while (true); +done: + return; +} + +static void ar5523_cancel_rx_bufs(struct ar5523 *ar) +{ + struct ar5523_rx_data *data; + unsigned long flags; + + do { + spin_lock_irqsave(&ar->rx_data_list_lock, flags); + if (!list_empty(&ar->rx_data_used)) + data = (struct ar5523_rx_data *) ar->rx_data_used.next; + else + data = NULL; + spin_unlock_irqrestore(&ar->rx_data_list_lock, flags); + + if (!data) + break; + + usb_kill_urb(data->urb); + list_move(&data->list, &ar->rx_data_free); + atomic_inc(&ar->rx_data_free_cnt); + } while (data); +} + +static void ar5523_free_rx_bufs(struct ar5523 *ar) +{ + struct ar5523_rx_data *data; + + ar5523_cancel_rx_bufs(ar); + while (!list_empty(&ar->rx_data_free)) { + data = (struct ar5523_rx_data *) ar->rx_data_free.next; + list_del(&data->list); + usb_free_urb(data->urb); + } +} + +static int ar5523_alloc_rx_bufs(struct ar5523 *ar) +{ + int i; + + for (i = 0; i < AR5523_RX_DATA_COUNT; i++) { + struct ar5523_rx_data *data = &ar->rx_data[i]; + + data->ar = ar; + data->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!data->urb) { + ar5523_err(ar, "could not allocate rx data urb\n"); + goto err; + } + list_add_tail(&data->list, &ar->rx_data_free); + atomic_inc(&ar->rx_data_free_cnt); + } + return 0; + +err: + ar5523_free_rx_bufs(ar); + return -ENOMEM; +} + +static void ar5523_data_tx_pkt_put(struct ar5523 *ar) +{ + atomic_dec(&ar->tx_nr_total); + if (!atomic_dec_return(&ar->tx_nr_pending)) { + del_timer(&ar->tx_wd_timer); + wake_up(&ar->tx_flush_waitq); + } + + if (atomic_read(&ar->tx_nr_total) < AR5523_TX_DATA_RESTART_COUNT) { + ar5523_dbg(ar, "restart tx queue\n"); + ieee80211_wake_queues(ar->hw); + } +} + +static void ar5523_data_tx_cb(struct urb *urb) +{ + struct sk_buff *skb = urb->context; + struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(skb); + struct ar5523_tx_data *data = (struct ar5523_tx_data *) + txi->driver_data; + struct ar5523 *ar = data->ar; + unsigned long flags; + + ar5523_dbg(ar, "data tx urb completed: %d\n", urb->status); + + spin_lock_irqsave(&ar->tx_data_list_lock, flags); + list_del(&data->list); + spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); + + if (urb->status) { + ar5523_dbg(ar, "%s: urb status: %d\n", __func__, urb->status); + ar5523_data_tx_pkt_put(ar); + ieee80211_free_txskb(ar->hw, skb); + } else { + skb_pull(skb, sizeof(struct ar5523_tx_desc) + sizeof(__be32)); + ieee80211_tx_status_irqsafe(ar->hw, skb); + } + usb_free_urb(urb); +} + +static void ar5523_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(skb); + struct ar5523_tx_data *data = (struct ar5523_tx_data *) + txi->driver_data; + struct ar5523 *ar = hw->priv; + unsigned long flags; + + ar5523_dbg(ar, "tx called\n"); + if (atomic_inc_return(&ar->tx_nr_total) >= AR5523_TX_DATA_COUNT) { + ar5523_dbg(ar, "tx queue full\n"); + ar5523_dbg(ar, "stop queues (tot %d pend %d)\n", + atomic_read(&ar->tx_nr_total), + atomic_read(&ar->tx_nr_pending)); + ieee80211_stop_queues(hw); + } + + data->skb = skb; + + spin_lock_irqsave(&ar->tx_data_list_lock, flags); + list_add_tail(&data->list, &ar->tx_queue_pending); + spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); + + ieee80211_queue_work(ar->hw, &ar->tx_work); +} + +static void ar5523_tx_work_locked(struct ar5523 *ar) +{ + struct ar5523_tx_data *data; + struct ar5523_tx_desc *desc; + struct ar5523_chunk *chunk; + struct ieee80211_tx_info *txi; + struct urb *urb; + struct sk_buff *skb; + int error = 0, paylen; + u32 txqid; + unsigned long flags; + + BUILD_BUG_ON(sizeof(struct ar5523_tx_data) > + IEEE80211_TX_INFO_DRIVER_DATA_SIZE); + + ar5523_dbg(ar, "%s\n", __func__); + do { + spin_lock_irqsave(&ar->tx_data_list_lock, flags); + if (!list_empty(&ar->tx_queue_pending)) { + data = (struct ar5523_tx_data *) + ar->tx_queue_pending.next; + list_del(&data->list); + } else + data = NULL; + spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); + + if (!data) + break; + + skb = data->skb; + txqid = 0; + txi = IEEE80211_SKB_CB(skb); + paylen = skb->len; + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + ar5523_err(ar, "Failed to allocate TX urb\n"); + ieee80211_free_txskb(ar->hw, skb); + continue; + } + + data->ar = ar; + data->urb = urb; + + desc = (struct ar5523_tx_desc *)skb_push(skb, sizeof(*desc)); + chunk = (struct ar5523_chunk *)skb_push(skb, sizeof(*chunk)); + + chunk->seqnum = 0; + chunk->flags = UATH_CFLAGS_FINAL; + chunk->length = cpu_to_be16(skb->len); + + desc->msglen = cpu_to_be32(skb->len); + desc->msgid = AR5523_DATA_ID; + desc->buflen = cpu_to_be32(paylen); + desc->type = cpu_to_be32(WDCMSG_SEND); + desc->flags = cpu_to_be32(UATH_TX_NOTIFY); + + if (test_bit(AR5523_CONNECTED, &ar->flags)) + desc->connid = cpu_to_be32(AR5523_ID_BSS); + else + desc->connid = cpu_to_be32(AR5523_ID_BROADCAST); + + if (txi->flags & IEEE80211_TX_CTL_USE_MINRATE) + txqid |= UATH_TXQID_MINRATE; + + desc->txqid = cpu_to_be32(txqid); + + urb->transfer_flags = URB_ZERO_PACKET; + usb_fill_bulk_urb(urb, ar->dev, ar5523_data_tx_pipe(ar->dev), + skb->data, skb->len, ar5523_data_tx_cb, skb); + + spin_lock_irqsave(&ar->tx_data_list_lock, flags); + list_add_tail(&data->list, &ar->tx_queue_submitted); + spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); + mod_timer(&ar->tx_wd_timer, jiffies + AR5523_TX_WD_TIMEOUT); + atomic_inc(&ar->tx_nr_pending); + + ar5523_dbg(ar, "TX Frame (%d pending)\n", + atomic_read(&ar->tx_nr_pending)); + error = usb_submit_urb(urb, GFP_KERNEL); + if (error) { + ar5523_err(ar, "error %d when submitting tx urb\n", + error); + spin_lock_irqsave(&ar->tx_data_list_lock, flags); + list_del(&data->list); + spin_unlock_irqrestore(&ar->tx_data_list_lock, flags); + atomic_dec(&ar->tx_nr_pending); + ar5523_data_tx_pkt_put(ar); + usb_free_urb(urb); + ieee80211_free_txskb(ar->hw, skb); + } + } while (true); +} + +static void ar5523_tx_work(struct work_struct *work) +{ + struct ar5523 *ar = container_of(work, struct ar5523, tx_work); + + ar5523_dbg(ar, "%s\n", __func__); + mutex_lock(&ar->mutex); + ar5523_tx_work_locked(ar); + mutex_unlock(&ar->mutex); +} + +static void ar5523_tx_wd_timer(unsigned long arg) +{ + struct ar5523 *ar = (struct ar5523 *) arg; + + ar5523_dbg(ar, "TX watchdog timer triggered\n"); + ieee80211_queue_work(ar->hw, &ar->tx_wd_work); +} + +static void ar5523_tx_wd_work(struct work_struct *work) +{ + struct ar5523 *ar = container_of(work, struct ar5523, tx_wd_work); + + /* Occasionally the TX queues stop responding. The only way to + * recover seems to be to reset the dongle. + */ + + mutex_lock(&ar->mutex); + ar5523_err(ar, "TX queue stuck (tot %d pend %d)\n", + atomic_read(&ar->tx_nr_total), + atomic_read(&ar->tx_nr_pending)); + + ar5523_err(ar, "Will restart dongle.\n"); + ar5523_cmd_write(ar, WDCMSG_TARGET_RESET, NULL, 0, 0); + mutex_unlock(&ar->mutex); +} + +static void ar5523_flush_tx(struct ar5523 *ar) +{ + ar5523_tx_work_locked(ar); + + /* Don't waste time trying to flush if USB is disconnected */ + if (test_bit(AR5523_USB_DISCONNECTED, &ar->flags)) + return; + if (!wait_event_timeout(ar->tx_flush_waitq, + !atomic_read(&ar->tx_nr_pending), AR5523_FLUSH_TIMEOUT)) + ar5523_err(ar, "flush timeout (tot %d pend %d)\n", + atomic_read(&ar->tx_nr_total), + atomic_read(&ar->tx_nr_pending)); +} + +static void ar5523_free_tx_cmd(struct ar5523 *ar) +{ + struct ar5523_tx_cmd *cmd = &ar->tx_cmd; + + usb_free_coherent(ar->dev, AR5523_MAX_RXCMDSZ, cmd->buf_tx, + cmd->urb_tx->transfer_dma); + usb_free_urb(cmd->urb_tx); +} + +static int ar5523_alloc_tx_cmd(struct ar5523 *ar) +{ + struct ar5523_tx_cmd *cmd = &ar->tx_cmd; + + cmd->ar = ar; + init_completion(&cmd->done); + + cmd->urb_tx = usb_alloc_urb(0, GFP_KERNEL); + if (!cmd->urb_tx) { + ar5523_err(ar, "could not allocate urb\n"); + return -ENOMEM; + } + cmd->buf_tx = usb_alloc_coherent(ar->dev, AR5523_MAX_TXCMDSZ, + GFP_KERNEL, + &cmd->urb_tx->transfer_dma); + if (!cmd->buf_tx) { + usb_free_urb(cmd->urb_tx); + return -ENOMEM; + } + return 0; +} + +/* + * This function is called periodically (every second) when associated to + * query device statistics. + */ +static void ar5523_stat_work(struct work_struct *work) +{ + struct ar5523 *ar = container_of(work, struct ar5523, stat_work.work); + int error; + + ar5523_dbg(ar, "%s\n", __func__); + mutex_lock(&ar->mutex); + + /* + * Send request for statistics asynchronously once a second. This + * seems to be important. Throughput is a lot better if this is done. + */ + error = ar5523_cmd_write(ar, WDCMSG_TARGET_GET_STATS, NULL, 0, 0); + if (error) + ar5523_err(ar, "could not query stats, error %d\n", error); + mutex_unlock(&ar->mutex); + ieee80211_queue_delayed_work(ar->hw, &ar->stat_work, HZ); +} + +/* + * Interface routines to the mac80211 stack. + */ +static int ar5523_start(struct ieee80211_hw *hw) +{ + struct ar5523 *ar = hw->priv; + int error; + __be32 val; + + ar5523_dbg(ar, "start called\n"); + + mutex_lock(&ar->mutex); + val = cpu_to_be32(0); + ar5523_cmd_write(ar, WDCMSG_BIND, &val, sizeof(val), 0); + + /* set MAC address */ + ar5523_config_multi(ar, CFG_MAC_ADDR, &ar->hw->wiphy->perm_addr, + ETH_ALEN); + + /* XXX honor net80211 state */ + ar5523_config(ar, CFG_RATE_CONTROL_ENABLE, 0x00000001); + ar5523_config(ar, CFG_DIVERSITY_CTL, 0x00000001); + ar5523_config(ar, CFG_ABOLT, 0x0000003f); + ar5523_config(ar, CFG_WME_ENABLED, 0x00000000); + + ar5523_config(ar, CFG_SERVICE_TYPE, 1); + ar5523_config(ar, CFG_TP_SCALE, 0x00000000); + ar5523_config(ar, CFG_TPC_HALF_DBM5, 0x0000003c); + ar5523_config(ar, CFG_TPC_HALF_DBM2, 0x0000003c); + ar5523_config(ar, CFG_OVERRD_TX_POWER, 0x00000000); + ar5523_config(ar, CFG_GMODE_PROTECTION, 0x00000000); + ar5523_config(ar, CFG_GMODE_PROTECT_RATE_INDEX, 0x00000003); + ar5523_config(ar, CFG_PROTECTION_TYPE, 0x00000000); + ar5523_config(ar, CFG_MODE_CTS, 0x00000002); + + error = ar5523_cmd_read(ar, WDCMSG_TARGET_START, NULL, 0, + &val, sizeof(val), AR5523_CMD_FLAG_MAGIC); + if (error) { + ar5523_dbg(ar, "could not start target, error %d\n", error); + goto err; + } + ar5523_dbg(ar, "WDCMSG_TARGET_START returns handle: 0x%x\n", + be32_to_cpu(val)); + + ar5523_switch_chan(ar); + + val = cpu_to_be32(TARGET_DEVICE_AWAKE); + ar5523_cmd_write(ar, WDCMSG_SET_PWR_MODE, &val, sizeof(val), 0); + /* XXX? check */ + ar5523_cmd_write(ar, WDCMSG_RESET_KEY_CACHE, NULL, 0, 0); + + set_bit(AR5523_HW_UP, &ar->flags); + queue_work(ar->wq, &ar->rx_refill_work); + + /* enable Rx */ + ar5523_set_rxfilter(ar, 0, UATH_FILTER_OP_INIT); + ar5523_set_rxfilter(ar, + UATH_FILTER_RX_UCAST | UATH_FILTER_RX_MCAST | + UATH_FILTER_RX_BCAST | UATH_FILTER_RX_BEACON, + UATH_FILTER_OP_SET); + + ar5523_set_ledsteady(ar, UATH_LED_ACTIVITY, UATH_LED_ON); + ar5523_dbg(ar, "start OK\n"); + +err: + mutex_unlock(&ar->mutex); + return error; +} + +static void ar5523_stop(struct ieee80211_hw *hw) +{ + struct ar5523 *ar = hw->priv; + + ar5523_dbg(ar, "stop called\n"); + + cancel_delayed_work_sync(&ar->stat_work); + mutex_lock(&ar->mutex); + clear_bit(AR5523_HW_UP, &ar->flags); + + ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_OFF); + ar5523_set_ledsteady(ar, UATH_LED_ACTIVITY, UATH_LED_OFF); + + ar5523_cmd_write(ar, WDCMSG_TARGET_STOP, NULL, 0, 0); + + del_timer_sync(&ar->tx_wd_timer); + cancel_work_sync(&ar->tx_wd_work); + cancel_work_sync(&ar->rx_refill_work); + ar5523_cancel_rx_bufs(ar); + mutex_unlock(&ar->mutex); +} + +static int ar5523_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct ar5523 *ar = hw->priv; + int ret; + + ar5523_dbg(ar, "set_rts_threshold called\n"); + mutex_lock(&ar->mutex); + + ret = ar5523_config(ar, CFG_USER_RTS_THRESHOLD, value); + + mutex_unlock(&ar->mutex); + return ret; +} + +static void ar5523_flush(struct ieee80211_hw *hw, bool drop) +{ + struct ar5523 *ar = hw->priv; + + ar5523_dbg(ar, "flush called\n"); + ar5523_flush_tx(ar); +} + +static int ar5523_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct ar5523 *ar = hw->priv; + + ar5523_dbg(ar, "add interface called\n"); + + if (ar->vif) { + ar5523_dbg(ar, "invalid add_interface\n"); + return -EOPNOTSUPP; + } + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + ar->vif = vif; + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + +static void ar5523_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct ar5523 *ar = hw->priv; + + ar5523_dbg(ar, "remove interface called\n"); + ar->vif = NULL; +} + +static int ar5523_hwconfig(struct ieee80211_hw *hw, u32 changed) +{ + struct ar5523 *ar = hw->priv; + + ar5523_dbg(ar, "config called\n"); + mutex_lock(&ar->mutex); + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + ar5523_dbg(ar, "Do channel switch\n"); + ar5523_flush_tx(ar); + ar5523_switch_chan(ar); + } + mutex_unlock(&ar->mutex); + return 0; +} + +static int ar5523_get_wlan_mode(struct ar5523 *ar, + struct ieee80211_bss_conf *bss_conf) +{ + struct ieee80211_supported_band *band; + int bit; + struct ieee80211_sta *sta; + u32 sta_rate_set; + + band = ar->hw->wiphy->bands[ar->hw->conf.channel->band]; + sta = ieee80211_find_sta(ar->vif, bss_conf->bssid); + if (!sta) { + ar5523_info(ar, "STA not found!\n"); + return WLAN_MODE_11b; + } + sta_rate_set = sta->supp_rates[ar->hw->conf.channel->band]; + + for (bit = 0; bit < band->n_bitrates; bit++) { + if (sta_rate_set & 1) { + int rate = band->bitrates[bit].bitrate; + switch (rate) { + case 60: + case 90: + case 120: + case 180: + case 240: + case 360: + case 480: + case 540: + return WLAN_MODE_11g; + } + } + sta_rate_set >>= 1; + } + return WLAN_MODE_11b; +} + +static void ar5523_create_rateset(struct ar5523 *ar, + struct ieee80211_bss_conf *bss_conf, + struct ar5523_cmd_rateset *rs, + bool basic) +{ + struct ieee80211_supported_band *band; + struct ieee80211_sta *sta; + int bit, i = 0; + u32 sta_rate_set, basic_rate_set; + + sta = ieee80211_find_sta(ar->vif, bss_conf->bssid); + basic_rate_set = bss_conf->basic_rates; + if (!sta) { + ar5523_info(ar, "STA not found. Cannot set rates\n"); + sta_rate_set = bss_conf->basic_rates; + } + sta_rate_set = sta->supp_rates[ar->hw->conf.channel->band]; + + ar5523_dbg(ar, "sta rate_set = %08x\n", sta_rate_set); + + band = ar->hw->wiphy->bands[ar->hw->conf.channel->band]; + for (bit = 0; bit < band->n_bitrates; bit++) { + BUG_ON(i >= AR5523_MAX_NRATES); + ar5523_dbg(ar, "Considering rate %d : %d\n", + band->bitrates[bit].hw_value, sta_rate_set & 1); + if (sta_rate_set & 1) { + rs->set[i] = band->bitrates[bit].hw_value; + if (basic_rate_set & 1 && basic) + rs->set[i] |= 0x80; + i++; + } + sta_rate_set >>= 1; + basic_rate_set >>= 1; + } + + rs->length = i; +} + +static int ar5523_set_basic_rates(struct ar5523 *ar, + struct ieee80211_bss_conf *bss) +{ + struct ar5523_cmd_rates rates; + + memset(&rates, 0, sizeof(rates)); + rates.connid = cpu_to_be32(2); /* XXX */ + rates.size = cpu_to_be32(sizeof(struct ar5523_cmd_rateset)); + ar5523_create_rateset(ar, bss, &rates.rateset, true); + + return ar5523_cmd_write(ar, WDCMSG_SET_BASIC_RATE, &rates, + sizeof(rates), 0); +} + +static int ar5523_create_connection(struct ar5523 *ar, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss) +{ + struct ar5523_cmd_create_connection create; + int wlan_mode; + + memset(&create, 0, sizeof(create)); + create.connid = cpu_to_be32(2); + create.bssid = cpu_to_be32(0); + /* XXX packed or not? */ + create.size = cpu_to_be32(sizeof(struct ar5523_cmd_rateset)); + + ar5523_create_rateset(ar, bss, &create.connattr.rateset, false); + + wlan_mode = ar5523_get_wlan_mode(ar, bss); + create.connattr.wlanmode = cpu_to_be32(wlan_mode); + + return ar5523_cmd_write(ar, WDCMSG_CREATE_CONNECTION, &create, + sizeof(create), 0); +} + +static int ar5523_write_associd(struct ar5523 *ar, + struct ieee80211_bss_conf *bss) +{ + struct ar5523_cmd_set_associd associd; + + memset(&associd, 0, sizeof(associd)); + associd.defaultrateix = cpu_to_be32(0); /* XXX */ + associd.associd = cpu_to_be32(bss->aid); + associd.timoffset = cpu_to_be32(0x3b); /* XXX */ + memcpy(associd.bssid, bss->bssid, ETH_ALEN); + return ar5523_cmd_write(ar, WDCMSG_WRITE_ASSOCID, &associd, + sizeof(associd), 0); +} + +static void ar5523_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss, + u32 changed) +{ + struct ar5523 *ar = hw->priv; + int error; + + ar5523_dbg(ar, "bss_info_changed called\n"); + mutex_lock(&ar->mutex); + + if (!(changed & BSS_CHANGED_ASSOC)) + goto out_unlock; + + if (bss->assoc) { + error = ar5523_create_connection(ar, vif, bss); + if (error) { + ar5523_err(ar, "could not create connection\n"); + goto out_unlock; + } + + error = ar5523_set_basic_rates(ar, bss); + if (error) { + ar5523_err(ar, "could not set negotiated rate set\n"); + goto out_unlock; + } + + error = ar5523_write_associd(ar, bss); + if (error) { + ar5523_err(ar, "could not set association\n"); + goto out_unlock; + } + + /* turn link LED on */ + ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_ON); + set_bit(AR5523_CONNECTED, &ar->flags); + ieee80211_queue_delayed_work(hw, &ar->stat_work, HZ); + + } else { + cancel_delayed_work(&ar->stat_work); + clear_bit(AR5523_CONNECTED, &ar->flags); + ar5523_set_ledsteady(ar, UATH_LED_LINK, UATH_LED_OFF); + } + +out_unlock: + mutex_unlock(&ar->mutex); + +} + +#define AR5523_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \ + FIF_ALLMULTI | \ + FIF_FCSFAIL | \ + FIF_OTHER_BSS) + +static void ar5523_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast) +{ + struct ar5523 *ar = hw->priv; + u32 filter = 0; + + ar5523_dbg(ar, "configure_filter called\n"); + mutex_lock(&ar->mutex); + ar5523_flush_tx(ar); + + *total_flags &= AR5523_SUPPORTED_FILTERS; + + /* The filters seems strange. UATH_FILTER_RX_BCAST and + * UATH_FILTER_RX_MCAST does not result in those frames being RXed. + * The only way I have found to get [mb]cast frames seems to be + * to set UATH_FILTER_RX_PROM. */ + filter |= UATH_FILTER_RX_UCAST | UATH_FILTER_RX_MCAST | + UATH_FILTER_RX_BCAST | UATH_FILTER_RX_BEACON | + UATH_FILTER_RX_PROM; + + ar5523_set_rxfilter(ar, 0, UATH_FILTER_OP_INIT); + ar5523_set_rxfilter(ar, filter, UATH_FILTER_OP_SET); + + mutex_unlock(&ar->mutex); +} + +static const struct ieee80211_ops ar5523_ops = { + .start = ar5523_start, + .stop = ar5523_stop, + .tx = ar5523_tx, + .set_rts_threshold = ar5523_set_rts_threshold, + .add_interface = ar5523_add_interface, + .remove_interface = ar5523_remove_interface, + .config = ar5523_hwconfig, + .bss_info_changed = ar5523_bss_info_changed, + .configure_filter = ar5523_configure_filter, + .flush = ar5523_flush, +}; + +static int ar5523_host_available(struct ar5523 *ar) +{ + struct ar5523_cmd_host_available setup; + + /* inform target the host is available */ + setup.sw_ver_major = cpu_to_be32(ATH_SW_VER_MAJOR); + setup.sw_ver_minor = cpu_to_be32(ATH_SW_VER_MINOR); + setup.sw_ver_patch = cpu_to_be32(ATH_SW_VER_PATCH); + setup.sw_ver_build = cpu_to_be32(ATH_SW_VER_BUILD); + return ar5523_cmd_read(ar, WDCMSG_HOST_AVAILABLE, + &setup, sizeof(setup), NULL, 0, 0); +} + +static int ar5523_get_devstatus(struct ar5523 *ar) +{ + u8 macaddr[ETH_ALEN]; + int error; + + /* retrieve MAC address */ + error = ar5523_get_status(ar, ST_MAC_ADDR, macaddr, ETH_ALEN); + if (error) { + ar5523_err(ar, "could not read MAC address\n"); + return error; + } + + SET_IEEE80211_PERM_ADDR(ar->hw, macaddr); + + error = ar5523_get_status(ar, ST_SERIAL_NUMBER, + &ar->serial[0], sizeof(ar->serial)); + if (error) { + ar5523_err(ar, "could not read device serial number\n"); + return error; + } + return 0; +} + +#define AR5523_SANE_RXBUFSZ 2000 + +static int ar5523_get_max_rxsz(struct ar5523 *ar) +{ + int error; + __be32 rxsize; + + /* Get max rx size */ + error = ar5523_get_status(ar, ST_WDC_TRANSPORT_CHUNK_SIZE, &rxsize, + sizeof(rxsize)); + if (error != 0) { + ar5523_err(ar, "could not read max RX size\n"); + return error; + } + + ar->rxbufsz = be32_to_cpu(rxsize); + + if (!ar->rxbufsz || ar->rxbufsz > AR5523_SANE_RXBUFSZ) { + ar5523_err(ar, "Bad rxbufsz from device. Using %d instead\n", + AR5523_SANE_RXBUFSZ); + ar->rxbufsz = AR5523_SANE_RXBUFSZ; + } + + ar5523_dbg(ar, "Max RX buf size: %d\n", ar->rxbufsz); + return 0; +} + +/* + * This is copied from rtl818x, but we should probably move this + * to common code as in OpenBSD. + */ +static const struct ieee80211_rate ar5523_rates[] = { + { .bitrate = 10, .hw_value = 2, }, + { .bitrate = 20, .hw_value = 4 }, + { .bitrate = 55, .hw_value = 11, }, + { .bitrate = 110, .hw_value = 22, }, + { .bitrate = 60, .hw_value = 12, }, + { .bitrate = 90, .hw_value = 18, }, + { .bitrate = 120, .hw_value = 24, }, + { .bitrate = 180, .hw_value = 36, }, + { .bitrate = 240, .hw_value = 48, }, + { .bitrate = 360, .hw_value = 72, }, + { .bitrate = 480, .hw_value = 96, }, + { .bitrate = 540, .hw_value = 108, }, +}; + +static const struct ieee80211_channel ar5523_channels[] = { + { .center_freq = 2412 }, + { .center_freq = 2417 }, + { .center_freq = 2422 }, + { .center_freq = 2427 }, + { .center_freq = 2432 }, + { .center_freq = 2437 }, + { .center_freq = 2442 }, + { .center_freq = 2447 }, + { .center_freq = 2452 }, + { .center_freq = 2457 }, + { .center_freq = 2462 }, + { .center_freq = 2467 }, + { .center_freq = 2472 }, + { .center_freq = 2484 }, +}; + +static int ar5523_init_modes(struct ar5523 *ar) +{ + BUILD_BUG_ON(sizeof(ar->channels) != sizeof(ar5523_channels)); + BUILD_BUG_ON(sizeof(ar->rates) != sizeof(ar5523_rates)); + + memcpy(ar->channels, ar5523_channels, sizeof(ar5523_channels)); + memcpy(ar->rates, ar5523_rates, sizeof(ar5523_rates)); + + ar->band.band = IEEE80211_BAND_2GHZ; + ar->band.channels = ar->channels; + ar->band.n_channels = ARRAY_SIZE(ar5523_channels); + ar->band.bitrates = ar->rates; + ar->band.n_bitrates = ARRAY_SIZE(ar5523_rates); + ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &ar->band; + return 0; +} + +/* + * Load the MIPS R4000 microcode into the device. Once the image is loaded, + * the device will detach itself from the bus and reattach later with a new + * product Id (a la ezusb). + */ +static int ar5523_load_firmware(struct usb_device *dev) +{ + struct ar5523_fwblock *txblock, *rxblock; + const struct firmware *fw; + void *fwbuf; + int len, offset; + int foolen; /* XXX(hch): handle short transfers */ + int error = -ENXIO; + + if (request_firmware(&fw, AR5523_FIRMWARE_FILE, &dev->dev)) { + dev_err(&dev->dev, "no firmware found: %s\n", + AR5523_FIRMWARE_FILE); + return -ENOENT; + } + + txblock = kmalloc(sizeof(*txblock), GFP_KERNEL); + if (!txblock) + goto out; + + rxblock = kmalloc(sizeof(*rxblock), GFP_KERNEL); + if (!rxblock) + goto out_free_txblock; + + fwbuf = kmalloc(AR5523_MAX_FWBLOCK_SIZE, GFP_KERNEL); + if (!fwbuf) + goto out_free_rxblock; + + memset(txblock, 0, sizeof(struct ar5523_fwblock)); + txblock->flags = cpu_to_be32(AR5523_WRITE_BLOCK); + txblock->total = cpu_to_be32(fw->size); + + offset = 0; + len = fw->size; + while (len > 0) { + int mlen = min(len, AR5523_MAX_FWBLOCK_SIZE); + + txblock->remain = cpu_to_be32(len - mlen); + txblock->len = cpu_to_be32(mlen); + + /* send firmware block meta-data */ + error = usb_bulk_msg(dev, ar5523_cmd_tx_pipe(dev), + txblock, sizeof(*txblock), &foolen, + AR5523_CMD_TIMEOUT); + if (error) { + dev_err(&dev->dev, + "could not send firmware block info\n"); + goto out_free_fwbuf; + } + + /* send firmware block data */ + memcpy(fwbuf, fw->data + offset, mlen); + error = usb_bulk_msg(dev, ar5523_data_tx_pipe(dev), + fwbuf, mlen, &foolen, + AR5523_DATA_TIMEOUT); + if (error) { + dev_err(&dev->dev, + "could not send firmware block data\n"); + goto out_free_fwbuf; + } + + /* wait for ack from firmware */ + error = usb_bulk_msg(dev, ar5523_cmd_rx_pipe(dev), + rxblock, sizeof(*rxblock), &foolen, + AR5523_CMD_TIMEOUT); + if (error) { + dev_err(&dev->dev, + "could not read firmware answer\n"); + goto out_free_fwbuf; + } + + len -= mlen; + offset += mlen; + } + + /* + * Set the error to -ENXIO to make sure we continue probing for + * a driver. + */ + error = -ENXIO; + + out_free_fwbuf: + kfree(fwbuf); + out_free_rxblock: + kfree(rxblock); + out_free_txblock: + kfree(txblock); + out: + release_firmware(fw); + return error; +} + +static int ar5523_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct ieee80211_hw *hw; + struct ar5523 *ar; + int error = -ENOMEM; + + /* + * Load firmware if the device requires it. This will return + * -ENXIO on success and we'll get called back afer the usb + * id changes to indicate that the firmware is present. + */ + if (id->driver_info & AR5523_FLAG_PRE_FIRMWARE) + return ar5523_load_firmware(dev); + + + hw = ieee80211_alloc_hw(sizeof(*ar), &ar5523_ops); + if (!hw) + goto out; + SET_IEEE80211_DEV(hw, &intf->dev); + + ar = hw->priv; + ar->hw = hw; + ar->dev = dev; + mutex_init(&ar->mutex); + + INIT_DELAYED_WORK(&ar->stat_work, ar5523_stat_work); + init_timer(&ar->tx_wd_timer); + setup_timer(&ar->tx_wd_timer, ar5523_tx_wd_timer, (unsigned long) ar); + INIT_WORK(&ar->tx_wd_work, ar5523_tx_wd_work); + INIT_WORK(&ar->tx_work, ar5523_tx_work); + INIT_LIST_HEAD(&ar->tx_queue_pending); + INIT_LIST_HEAD(&ar->tx_queue_submitted); + spin_lock_init(&ar->tx_data_list_lock); + atomic_set(&ar->tx_nr_total, 0); + atomic_set(&ar->tx_nr_pending, 0); + init_waitqueue_head(&ar->tx_flush_waitq); + + atomic_set(&ar->rx_data_free_cnt, 0); + INIT_WORK(&ar->rx_refill_work, ar5523_rx_refill_work); + INIT_LIST_HEAD(&ar->rx_data_free); + INIT_LIST_HEAD(&ar->rx_data_used); + spin_lock_init(&ar->rx_data_list_lock); + + ar->wq = create_singlethread_workqueue("ar5523"); + if (!ar->wq) { + ar5523_err(ar, "Could not create wq\n"); + goto out_free_ar; + } + + error = ar5523_alloc_rx_bufs(ar); + if (error) { + ar5523_err(ar, "Could not allocate rx buffers\n"); + goto out_free_wq; + } + + error = ar5523_alloc_rx_cmd(ar); + if (error) { + ar5523_err(ar, "Could not allocate rx command buffers\n"); + goto out_free_rx_bufs; + } + + error = ar5523_alloc_tx_cmd(ar); + if (error) { + ar5523_err(ar, "Could not allocate tx command buffers\n"); + goto out_free_rx_cmd; + } + + error = ar5523_submit_rx_cmd(ar); + if (error) { + ar5523_err(ar, "Failed to submit rx cmd\n"); + goto out_free_tx_cmd; + } + + /* + * We're now ready to send/receive firmware commands. + */ + error = ar5523_host_available(ar); + if (error) { + ar5523_err(ar, "could not initialize adapter\n"); + goto out_cancel_rx_cmd; + } + + error = ar5523_get_max_rxsz(ar); + if (error) { + ar5523_err(ar, "could not get caps from adapter\n"); + goto out_cancel_rx_cmd; + } + + error = ar5523_get_devcap(ar); + if (error) { + ar5523_err(ar, "could not get caps from adapter\n"); + goto out_cancel_rx_cmd; + } + + error = ar5523_get_devstatus(ar); + if (error != 0) { + ar5523_err(ar, "could not get device status\n"); + goto out_cancel_rx_cmd; + } + + ar5523_info(ar, "MAC/BBP AR5523, RF AR%c112\n", + (id->driver_info & AR5523_FLAG_ABG) ? '5' : '2'); + + ar->vif = NULL; + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_HAS_RATE_CONTROL; + hw->extra_tx_headroom = sizeof(struct ar5523_tx_desc) + + sizeof(struct ar5523_chunk); + hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + hw->queues = 1; + + error = ar5523_init_modes(ar); + if (error) + goto out_cancel_rx_cmd; + + usb_set_intfdata(intf, hw); + + error = ieee80211_register_hw(hw); + if (error) { + ar5523_err(ar, "could not register device\n"); + goto out_cancel_rx_cmd; + } + + ar5523_info(ar, "Found and initialized AR5523 device\n"); + return 0; + +out_cancel_rx_cmd: + ar5523_cancel_rx_cmd(ar); +out_free_tx_cmd: + ar5523_free_tx_cmd(ar); +out_free_rx_cmd: + ar5523_free_rx_cmd(ar); +out_free_rx_bufs: + ar5523_free_rx_bufs(ar); +out_free_wq: + destroy_workqueue(ar->wq); +out_free_ar: + ieee80211_free_hw(hw); +out: + return error; +} + +static void ar5523_disconnect(struct usb_interface *intf) +{ + struct ieee80211_hw *hw = usb_get_intfdata(intf); + struct ar5523 *ar = hw->priv; + + ar5523_dbg(ar, "detaching\n"); + set_bit(AR5523_USB_DISCONNECTED, &ar->flags); + + ieee80211_unregister_hw(hw); + + ar5523_cancel_rx_cmd(ar); + ar5523_free_tx_cmd(ar); + ar5523_free_rx_cmd(ar); + ar5523_free_rx_bufs(ar); + + destroy_workqueue(ar->wq); + + ieee80211_free_hw(hw); + usb_set_intfdata(intf, NULL); +} + +#define AR5523_DEVICE_UG(vendor, device) \ + { USB_DEVICE((vendor), (device)) }, \ + { USB_DEVICE((vendor), (device) + 1), \ + .driver_info = AR5523_FLAG_PRE_FIRMWARE } +#define AR5523_DEVICE_UX(vendor, device) \ + { USB_DEVICE((vendor), (device)), \ + .driver_info = AR5523_FLAG_ABG }, \ + { USB_DEVICE((vendor), (device) + 1), \ + .driver_info = AR5523_FLAG_ABG|AR5523_FLAG_PRE_FIRMWARE } + +static struct usb_device_id ar5523_id_table[] = { + AR5523_DEVICE_UG(0x168c, 0x0001), /* Atheros / AR5523 */ + AR5523_DEVICE_UG(0x0cf3, 0x0001), /* Atheros2 / AR5523_1 */ + AR5523_DEVICE_UG(0x0cf3, 0x0003), /* Atheros2 / AR5523_2 */ + AR5523_DEVICE_UX(0x0cf3, 0x0005), /* Atheros2 / AR5523_3 */ + AR5523_DEVICE_UG(0x0d8e, 0x7801), /* Conceptronic / AR5523_1 */ + AR5523_DEVICE_UX(0x0d8e, 0x7811), /* Conceptronic / AR5523_2 */ + AR5523_DEVICE_UX(0x2001, 0x3a00), /* Dlink / DWLAG132 */ + AR5523_DEVICE_UG(0x2001, 0x3a02), /* Dlink / DWLG132 */ + AR5523_DEVICE_UX(0x2001, 0x3a04), /* Dlink / DWLAG122 */ + AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */ + AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */ + AR5523_DEVICE_UG(0x129b, 0x160c), /* Gigaset / USB stick 108 + (CyberTAN Technology) */ + AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */ + AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */ + AR5523_DEVICE_UG(0x0d8e, 0x7802), /* Globalsun / AR5523_3 */ + AR5523_DEVICE_UX(0x0846, 0x4300), /* Netgear / WG111U */ + AR5523_DEVICE_UG(0x0846, 0x4250), /* Netgear / WG111T */ + AR5523_DEVICE_UG(0x0846, 0x5f00), /* Netgear / WPN111 */ + AR5523_DEVICE_UG(0x157e, 0x3006), /* Umedia / AR5523_1 */ + AR5523_DEVICE_UX(0x157e, 0x3205), /* Umedia / AR5523_2 */ + AR5523_DEVICE_UG(0x157e, 0x3006), /* Umedia / TEW444UBEU */ + AR5523_DEVICE_UG(0x1435, 0x0826), /* Wistronneweb / AR5523_1 */ + AR5523_DEVICE_UX(0x1435, 0x0828), /* Wistronneweb / AR5523_2 */ + AR5523_DEVICE_UG(0x0cde, 0x0012), /* Zcom / AR5523 */ + AR5523_DEVICE_UG(0x1385, 0x4250), /* Netgear3 / WG111T (2) */ + AR5523_DEVICE_UG(0x1385, 0x5f00), /* Netgear / WPN111 */ + AR5523_DEVICE_UG(0x1385, 0x5f02), /* Netgear / WPN111 */ + { } +}; +MODULE_DEVICE_TABLE(usb, ar5523_id_table); + +static struct usb_driver ar5523_driver = { + .name = "ar5523", + .id_table = ar5523_id_table, + .probe = ar5523_probe, + .disconnect = ar5523_disconnect, +}; + +static int __init ar5523_init(void) +{ + return usb_register(&ar5523_driver); +} + +static void __exit ar5523_exit(void) +{ + usb_deregister(&ar5523_driver); +} + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_FIRMWARE(AR5523_FIRMWARE_FILE); + +module_init(ar5523_init); +module_exit(ar5523_exit); -- 1.7.9.5