Return-path: Received: from mga11.intel.com ([192.55.52.93]:2558 "EHLO mga11.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757363Ab2KAJqc (ORCPT ); Thu, 1 Nov 2012 05:46:32 -0400 Date: Thu, 1 Nov 2012 11:46:28 +0200 From: Andrei Emeltchenko To: Daniel Mack Cc: Bing Zhao , "linux-wireless@vger.kernel.org" , Amitkumar Karwar , "Porter, Matt" Subject: Re: mwifiex_sdio problem: firmware fails to be active in time Message-ID: <20121101094626.GB17693@aemeltch-MOBL1> (sfid-20121101_104644_795973_786316D4) References: <507F4448.2040707@gmail.com> <477F20668A386D41ADCC57781B1F7043083B80E44A@SC-VEXCH1.marvell.com> <50802984.6070203@gmail.com> <508AF992.8070606@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <508AF992.8070606@gmail.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi Mack, On Fri, Oct 26, 2012 at 10:58:58PM +0200, Daniel Mack wrote: > [have to re-open this issue again] > > On 21.10.2012 16:16, Andrei Emeltchenko wrote: > > I have the same board and see this problem sometimes. Reloading modules > > might help, if not reboot always works :). > > I thought I solved this issue, but I can't reproduce the running version > anymore unfortunately. It constantly fails with the error I described, > even though the clock and all voltages etc are definitely stable. I can > also rule out hardware issues as the BSP kernel (3.2.18) works just fine > with the same setup including the firmware image. > > Andrei, may I ask which board you have exactly? I do not know exactly, it is MARVELL RD8787 AG1_V3 with WIB Adapter v3. > What kernel version are > you based on? I use latest bluetooth-next which is 3.7-rc1 + some bluetooth & wireless patches Best regards Andrei Emeltchenko