Return-path: Received: from mail.freestuffjunction.co.uk ([109.169.51.71]:31418 "EHLO mail.freestuffjunction.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752329Ab2KFPew (ORCPT ); Tue, 6 Nov 2012 10:34:52 -0500 Message-ID: <50992E0E.3040606@ehuk.net> (sfid-20121106_163509_434689_EFF28ABD) Date: Tue, 06 Nov 2012 15:34:38 +0000 From: Eddie Chapman Reply-To: Eddie Chapman MIME-Version: 1.0 To: Johannes Berg CC: stable@vger.kernel.org, florian@reitmeir.org, linux-wireless@vger.kernel.org Subject: Re: Linux 3.6.5 References: <20121031173811.GA12970@kroah.com> <509575F4.5020109@ehuk.net> <20121105081757.GA3730@kroah.com> <50979D38.6010002@ehuk.net> (sfid-20121105_121423_464154_72561532) <1352116868.9466.2.camel@jlt4.sipsolutions.net> <509838F4.4010301@ehuk.net> <1352188621.9440.4.camel@jlt4.sipsolutions.net> In-Reply-To: <1352188621.9440.4.camel@jlt4.sipsolutions.net> Content-Type: text/plain; charset=UTF-8; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi Johannes, > Yeah, I forgot to ask about the AP. Can you show the output of "iw wlan0 > scan dump" for your AP while you're connected? It should show something > like this (note the "associated" indication): > > BSS 02:00:00:00:00:00 (on wlan1) -- associated > TSF: 1352188517669470 usec (15650d, 07:55:17) > freq: 2432 > [...] > > I'm particularly interested in the "freq" (as above) and the HT > capabilities/operation information. The AP is a Netgear WNR2000v3 running DD-WRT v24-sp2 (03/19/12) std. After sshing into it and playing around with the iw command, the phy is phy0 and the device is ath0. "iw ath0 scan dump" returns nothing unfortunately. In case it helps, on the laptop (the client) I do get output from "iw wlan0 scan dump": BSS 82:e1:fa:1a:65:00 (on wlan0) -- associated TSF: 2791936678 usec (0d, 00:46:31) freq: 2452 beacon interval: 100 capability: ESS Privacy ShortSlotTime (0x0411) signal: -37.00 dBm last seen: 98451 ms ago Information elements from Probe Response frame: SSID: e79164285 Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0 DS Parameter set: channel 9 ERP: Barker_Preamble_Mode Extended supported rates: 24.0 36.0 48.0 54.0 RSN: * Version: 1 * Group cipher: CCMP * Pairwise ciphers: CCMP * Authentication suites: PSK * Capabilities: 16-PTKSA-RC (0x000c) HT capabilities: Capabilities: 0x11ee HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 HT operation: * primary channel: 9 * secondary channel offset: above * STA channel width: any * RIFS: 0 * HT protection: no * non-GF present: 0 * OBSS non-GF present: 0 * dual beacon: 0 * dual CTS protection: 0 * STBC beacon: 0 * L-SIG TXOP Prot: 0 * PCO active: 0 * PCO phase: 0 WMM: * Parameter version 1 * BE: CW 15-1023, AIFSN 3 * BK: CW 15-1023, AIFSN 7 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec * VO: CW 3-7, AIFSN 2, TXOP 1504 usec Back on the AP, I played around and below is the output of some of the commands I ran that seemed to return useful information, as well as dmesg output. Many of the commands I tried either returned nothing or some error like "not supported". Do any of them give you the info you need? If not any other command you want me to run? All this was done with the HT20/HT40 patch NOT applied. thanks again for investigating this and all your dev efforts :-) regards, Eddie root@DD-WRT:~# iwconfig ath0 ath0 IEEE 802.11bgn Mode:Master Frequency:2.452 GHz Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off root@DD-WRT:~# iwlist ath0 power ath0 Current mode:off root@DD-WRT:~# iw ath0 info Interface ath0 ifindex 6 type AP wiphy 3 root@DD-WRT:~# iw phy0 info Wiphy phy0 Band 1: Capabilities: 0x11ee HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) * 2472 MHz [13] (20.0 dBm) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 5 (up to 2250m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x3 RX 0x3 Configured Antennas: TX 0x3 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor interface combinations are not supported Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (82) * Unknown command (81) * Unknown command (84) * Unknown command (87) * Unknown command (85) * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports HT-IBSS. root@DD-WRT:~# iw ath0 survey dump Survey data from ath0 frequency: 2412 MHz noise: -94 dBm channel active time: 51 ms channel busy time: 0 ms channel receive time: 0 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2417 MHz noise: -94 dBm channel active time: 58 ms channel busy time: 0 ms channel receive time: 0 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2422 MHz noise: -95 dBm channel active time: 58 ms channel busy time: 12 ms channel receive time: 3 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2427 MHz noise: -95 dBm channel active time: 58 ms channel busy time: 1 ms channel receive time: 0 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2432 MHz noise: -95 dBm channel active time: 58 ms channel busy time: 11 ms channel receive time: 2 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2437 MHz noise: -95 dBm channel active time: 58 ms channel busy time: 1 ms channel receive time: 0 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2442 MHz noise: -95 dBm channel active time: 58 ms channel busy time: 4 ms channel receive time: 0 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2447 MHz noise: -95 dBm channel active time: 58 ms channel busy time: 8 ms channel receive time: 0 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2452 MHz [in use] noise: -95 dBm channel active time: 244549336 ms channel busy time: 19353849 ms channel receive time: 1387651 ms channel transmit time: 10752120 ms Survey data from ath0 frequency: 2457 MHz noise: -95 dBm channel active time: 58 ms channel busy time: 4 ms channel receive time: 0 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2462 MHz noise: -95 dBm channel active time: 58 ms channel busy time: 17 ms channel receive time: 9 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2467 MHz noise: -95 dBm channel active time: 58 ms channel busy time: 17 ms channel receive time: 6 ms channel transmit time: 0 ms Survey data from ath0 frequency: 2472 MHz noise: -95 dBm channel active time: 58 ms channel busy time: 16 ms channel receive time: 8 ms channel transmit time: 0 ms root@DD-WRT:~# iwlist ath0 frequency ath0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Current Frequency=2.452 GHz (Channel 9) Finally, here is dmesg output on the AP: <5>[ 0.000000] Linux version 3.2.12-rc1-svn18774 (root@dd-wrt) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1482 Mon Mar 19 11:54:29 CET 2012 <4>[ 0.000000] flash_size passed from bootloader = 4 <6>[ 0.000000] bootconsole [early0] enabled <6>[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) <6>[ 0.000000] Determined physical RAM map: <6>[ 0.000000] memory: 02000000 @ 00000000 (usable) <4>[ 0.000000] Zone PFN ranges: <4>[ 0.000000] Normal 0x00000000 -> 0x00002000 <4>[ 0.000000] Movable zone start PFN for each node <4>[ 0.000000] early_node_map[1] active PFN ranges <4>[ 0.000000] 0: 0x00000000 -> 0x00002000 <7>[ 0.000000] On node 0 totalpages: 8192 <7>[ 0.000000] free_area_init_node: node 0, pgdat 8026e830, node_mem_map 81000000 <7>[ 0.000000] Normal zone: 64 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 8128 pages, LIFO batch:0 <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 <7>[ 0.000000] pcpu-alloc: [0] 0 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 <5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init <6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) <6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) <4>[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. <4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes <6>[ 0.000000] Writing ErrCtl register=00000000 <6>[ 0.000000] Readback ErrCtl register=00000000 <6>[ 0.000000] Memory: 29528k/32768k available (2081k kernel code, 3240k reserved, 402k data, 160k init, 0k highmem) <6>[ 0.000000] NR_IRQS:80 <6>[ 0.000000] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080) <6>[ 0.070000] pid_max: default: 32768 minimum: 301 <6>[ 0.070000] Mount-cache hash table entries: 512 <6>[ 0.080000] NET: Registered protocol family 16 <6>[ 0.100000] found calibration data for slot 0 on 0xBF3F1000 <4>[ 0.310000] registering PCI controller with io_map_base unset <6>[ 0.330000] bio: create slab at 0 <7>[ 0.330000] pci 0000:00:00.0: [168c:ff1c] type 0 class 0x000200 <6>[ 0.330000] pci 0000:00:00.0: fixup device configuration <0>[ 0.340000] bootstrap returns device 168C:2E <7>[ 0.340000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit] <7>[ 0.340000] pci 0000:00:00.0: supports D1 <7>[ 0.340000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot <7>[ 0.340000] pci 0000:00:00.0: PME# disabled <6>[ 0.340000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit] <6>[ 0.350000] pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI address [0x10000000-0x1000ffff]) <6>[ 0.360000] PCI: mapping irq 72 to pin1@0000:00:00.0 <6>[ 0.360000] Switching to clocksource MIPS <6>[ 0.370000] NET: Registered protocol family 2 <6>[ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.380000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) <6>[ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) <6>[ 0.390000] TCP: Hash tables configured (established 1024 bind 1024) <6>[ 0.400000] TCP reno registered <6>[ 0.400000] UDP hash table entries: 256 (order: 0, 4096 bytes) <6>[ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) <6>[ 0.420000] NET: Registered protocol family 1 <7>[ 0.420000] PCI: CLS 0 bytes, default 32 <5>[ 0.420000] gpio_proc: module loaded and /proc/gpio/ created <5>[ 0.430000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created <6>[ 0.440000] squashfs: version 3.0 (2006/03/15) Phillip Lougher <6>[ 0.440000] msgmni has been set to 57 <6>[ 0.450000] io scheduler noop registered <6>[ 0.450000] io scheduler deadline registered (default) <6>[ 0.460000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled <6>[ 0.480000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A <6>[ 0.490000] console [ttyS0] enabled, bootconsole disabled <0>[ 0.500000] guessed flashsize = 4M <0>[ 0.510000] scanning for root partition <0>[ 0.510000] WNR2000 uboot detected <0>[ 0.510000] guessed bootloader size = 50000 <0>[ 0.520000] <0>[ 0.520000] found squashfs at 150000 <5>[ 0.530000] Creating 8 MTD partitions on "ar7240-nor0": <5>[ 0.530000] 0x000000000000-0x000000050000 : "RedBoot" <5>[ 0.540000] 0x000000050000-0x0000003e0000 : "linux" <5>[ 0.550000] 0x000000150000-0x0000003e0000 : "rootfs" <5>[ 0.550000] mtd: partition "rootfs" set to be root filesystem <5>[ 0.560000] 0x0000003e0000-0x000000400000 : "ddwrt" <5>[ 0.570000] 0x0000003e0000-0x0000003f0000 : "nvram" <5>[ 0.570000] 0x0000003f0000-0x000000400000 : "board_config" <5>[ 0.580000] 0x000000000000-0x000000400000 : "fullflash" <5>[ 0.590000] 0x000000000000-0x000000050000 : "fullboot" <6>[ 0.600000] tun: Universal TUN/TAP device driver, 1.6 <6>[ 0.600000] tun: (C) 1999-2004 Max Krasnyansky <6>[ 1.010000] PPP generic driver version 2.4.2 <6>[ 1.010000] PPP BSD Compression module registered <6>[ 1.020000] PPP Deflate Compression module registered <6>[ 1.020000] PPP MPPE Compression module registered <6>[ 1.030000] NET: Registered protocol family 24 <6>[ 1.030000] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout= 0) <7>[ 1.040000] Registered led device: generic_0 <7>[ 1.040000] Registered led device: generic_1 <7>[ 1.050000] Registered led device: generic_2 <7>[ 1.050000] Registered led device: generic_3 <7>[ 1.050000] Registered led device: generic_4 <7>[ 1.050000] Registered led device: generic_5 <7>[ 1.050000] Registered led device: generic_6 <7>[ 1.050000] Registered led device: generic_7 <7>[ 1.050000] Registered led device: generic_8 <7>[ 1.050000] Registered led device: generic_9 <7>[ 1.050000] Registered led device: generic_10 <7>[ 1.050000] Registered led device: generic_11 <7>[ 1.050000] Registered led device: generic_12 <7>[ 1.050000] Registered led device: generic_13 <7>[ 1.050000] Registered led device: generic_14 <7>[ 1.050000] Registered led device: generic_15 <7>[ 1.050000] Registered led device: generic_16 <7>[ 1.050000] Registered led device: generic_17 <7>[ 1.050000] Registered led device: generic_18 <7>[ 1.050000] Registered led device: generic_19 <7>[ 1.050000] Registered led device: generic_20 <7>[ 1.050000] Registered led device: generic_21 <7>[ 1.050000] Registered led device: generic_22 <7>[ 1.050000] Registered led device: generic_23 <7>[ 1.050000] Registered led device: generic_24 <7>[ 1.050000] Registered led device: generic_25 <7>[ 1.050000] Registered led device: generic_26 <7>[ 1.050000] Registered led device: generic_27 <7>[ 1.050000] Registered led device: generic_28 <7>[ 1.050000] Registered led device: generic_29 <7>[ 1.060000] Registered led device: generic_30 <7>[ 1.060000] Registered led device: generic_31 <7>[ 1.060000] Registered led device: wireless_generic_0 <7>[ 1.060000] Registered led device: wireless_generic_1 <7>[ 1.060000] Registered led device: wireless_generic_2 <7>[ 1.060000] Registered led device: wireless_generic_3 <7>[ 1.060000] Registered led device: wireless_generic_4 <7>[ 1.060000] Registered led device: wireless_generic_5 <7>[ 1.060000] Registered led device: wireless_generic_6 <7>[ 1.060000] Registered led device: wireless_generic_7 <7>[ 1.060000] Registered led device: wireless_generic_8 <7>[ 1.060000] Registered led device: wireless_generic_9 <7>[ 1.060000] Registered led device: wireless_generic_10 <7>[ 1.060000] Registered led device: wireless_generic_11 <7>[ 1.060000] Registered led device: wireless_generic_12 <7>[ 1.060000] Registered led device: wireless_generic_13 <7>[ 1.060000] Registered led device: wireless_generic_14 <7>[ 1.060000] Registered led device: wireless_generic_15 <6>[ 1.060000] u32 classifier <6>[ 1.060000] input device check on <6>[ 1.070000] Actions configured <6>[ 1.070000] Netfilter messages via NETLINK v0.30. <6>[ 1.080000] nf_conntrack version 0.5.0 (461 buckets, 1844 max) <4>[ 1.080000] nf_conntrack_rtsp v0.6.21 loading <4>[ 1.090000] nf_nat_rtsp v0.6.21 loading <6>[ 1.090000] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 1.100000] IPP2P v0.8.2 loading <6>[ 1.100000] TCP westwood registered <6>[ 1.100000] TCP hybla registered <6>[ 1.110000] TCP vegas registered <6>[ 1.110000] NET: Registered protocol family 17 <6>[ 1.120000] 8021q: 802.1Q VLAN Support v1.8 <6>[ 1.120000] searching for nvram <6>[ 1.120000] nvram size = 0 <6>[ 1.160000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. <6>[ 1.170000] Freeing unused kernel memory: 160k freed <6>[ 4.250000] ag71xx_mdio: probed <6>[ 4.250000] eth0: Atheros AG71xx at 0xb9000000, irq 4 <7>[ 4.850000] eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] <6>[ 4.850000] eth1: Atheros AG71xx at 0xba000000, irq 5 <6>[ 5.440000] eth1: Found an AR7240/AR9330 built-in switch <6>[ 5.730000] Compat-wireless backport release: compat-wireless-2012-02-23-9-g3e5b1f0 <6>[ 5.730000] Backport based on wireless-testing.git master-2012-02-27 <6>[ 5.910000] cfg80211: Calling CRDA to update world regulatory domain <6>[ 6.300000] cfg80211: World regulatory domain updated: <6>[ 6.310000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) <6>[ 6.320000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 6.320000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) <6>[ 6.330000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) <6>[ 6.340000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 6.350000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 6.590000] eth1: link up (1000Mbps/Full duplex) <7>[ 6.780000] PCI: Setting latency timer of device 0000:00:00.0 to 64 <3>[ 6.780000] ath: eeprom contains invalid mac address: ff:ff:ff:ff:ff:ff <3>[ 6.790000] ath: random mac address will be used: 42:83:03:c5:15:55 <7>[ 6.800000] ath: EEPROM regdomain: 0x0 <7>[ 6.800000] ath: EEPROM indicates default country code should be used <7>[ 6.800000] ath: doing EEPROM country->regdmn map search <7>[ 6.800000] ath: country maps to regdmn code: 0x3a <7>[ 6.800000] ath: Country alpha2 being used: US <7>[ 6.800000] ath: Regpair used: 0x3a <7>[ 6.810000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' <7>[ 6.810000] Registered led device: ath9k-phy0 <6>[ 6.810000] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xb0000000, irq=72 <6>[ 6.820000] cfg80211: Calling CRDA for country: US <6>[ 6.940000] cfg80211: Regulatory domain changed to country: US <6>[ 6.950000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) <6>[ 6.960000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) <6>[ 6.970000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) <6>[ 6.970000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 6.980000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 6.990000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 7.000000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) <6>[ 9.010000] device eth0 entered promiscuous mode <6>[ 9.020000] eth1: link down <6>[ 9.090000] device eth1 entered promiscuous mode <6>[ 9.180000] cfg80211: Calling CRDA to update world regulatory domain <6>[ 9.210000] eth1: link up (1000Mbps/Full duplex) <6>[ 9.210000] br0: port 2(eth1) entering forwarding state <6>[ 9.220000] br0: port 2(eth1) entering forwarding state <6>[ 9.230000] cfg80211: World regulatory domain updated: <6>[ 9.230000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) <6>[ 9.240000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 9.250000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) <6>[ 9.260000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) <6>[ 9.260000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 9.270000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 9.280000] cfg80211: Calling CRDA for country: GB <6>[ 9.300000] cfg80211: Regulatory domain changed to country: GB <6>[ 9.310000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) <6>[ 9.320000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) <6>[ 9.320000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) <6>[ 9.330000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) <6>[ 9.340000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) <6>[ 11.220000] br0: port 2(eth1) entering forwarding state <6>[ 30.490000] device ath0 entered promiscuous mode <6>[ 30.490000] br0: port 3(ath0) entering forwarding state <6>[ 30.500000] br0: port 3(ath0) entering forwarding state <6>[ 32.420000] device ath0.1 entered promiscuous mode <6>[ 32.420000] br0: port 4(ath0.1) entering forwarding state <6>[ 32.430000] br0: port 4(ath0.1) entering forwarding state <6>[ 32.500000] br0: port 3(ath0) entering forwarding state <6>[ 32.810000] device eth1 left promiscuous mode <6>[ 32.810000] br0: port 2(eth1) entering forwarding state <6>[ 32.890000] device eth1.2 entered promiscuous mode <6>[ 32.890000] device eth1 entered promiscuous mode <6>[ 32.900000] br0: port 2(eth1.2) entering forwarding state <6>[ 32.900000] br0: port 2(eth1.2) entering forwarding state <6>[ 32.970000] device eth1.6 entered promiscuous mode <6>[ 32.970000] br1: port 1(eth1.6) entering forwarding state <6>[ 32.980000] br1: port 1(eth1.6) entering forwarding state <6>[ 32.990000] device ath0.1 left promiscuous mode <6>[ 33.000000] br0: port 4(ath0.1) entering forwarding state <6>[ 33.010000] device ath0.1 entered promiscuous mode <6>[ 33.020000] br1: port 2(ath0.1) entering forwarding state <6>[ 33.020000] br1: port 2(ath0.1) entering forwarding state <6>[ 34.900000] br0: port 2(eth1.2) entering forwarding state <6>[ 48.000000] br1: port 1(eth1.6) entering forwarding state <6>[ 48.040000] br1: port 2(ath0.1) entering forwarding state