Return-path: Received: from sabertooth01.qualcomm.com ([65.197.215.72]:12671 "EHLO sabertooth01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2993197Ab2KOLRP (ORCPT ); Thu, 15 Nov 2012 06:17:15 -0500 Cc: Vladimir Kondratiev , , "Luis R . Rodriguez" From: Vladimir Kondratiev To: "John W . Linville" , Johannes Berg Subject: [PATCH v8 0/4] driver for 60g Wilocity chip wil6210 Date: Thu, 15 Nov 2012 13:16:58 +0200 Message-ID: <1352978222-13866-1-git-send-email-qca_vkondrat@qca.qualcomm.com> (sfid-20121115_121718_732229_66779624) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: There are several changes: - dynamic hex dump code moved core includes where it should belong it is submitted separately; and included here for completness - see patch 4/4. It may be integrated independent on other patches in this set - separation between "Atheros card" and "depending on common Atheros code" moved to patch by its own - see patch 2/4. It may be integrated independent on other patches in this set. This is the same patch as I submitted Nov 14 in thread titled "Re: [PATCH v7 2/2] wireless: integrate wil6210 driver into build structure" - removed all empty methods from cfg80211_ops - restructure IRQ handling a little bit Vladimir Kondratiev (4): wireless: Driver for 60GHz card wil6210 wireless: allow Atheros card to not depend on ath.ko wireless: integrate wil6210 driver into build dynamic_debug: dynamic hex dump Documentation/dynamic-debug-howto.txt | 11 +- drivers/net/wireless/ath/Kconfig | 8 +- drivers/net/wireless/ath/Makefile | 1 + drivers/net/wireless/ath/ar5523/Kconfig | 1 + drivers/net/wireless/ath/ath5k/Kconfig | 1 + drivers/net/wireless/ath/ath6kl/Kconfig | 1 + drivers/net/wireless/ath/ath9k/Kconfig | 1 + drivers/net/wireless/ath/carl9170/Kconfig | 1 + drivers/net/wireless/ath/wil6210/Kconfig | 29 + drivers/net/wireless/ath/wil6210/Makefile | 15 + drivers/net/wireless/ath/wil6210/cfg80211.c | 484 +++++++++++++ drivers/net/wireless/ath/wil6210/debugfs.c | 510 ++++++++++++++ drivers/net/wireless/ath/wil6210/interrupt.c | 374 ++++++++++ drivers/net/wireless/ath/wil6210/main.c | 411 +++++++++++ drivers/net/wireless/ath/wil6210/netdev.c | 155 +++++ drivers/net/wireless/ath/wil6210/pcie_bus.c | 218 ++++++ drivers/net/wireless/ath/wil6210/sysfs.c | 134 ++++ drivers/net/wireless/ath/wil6210/txrx.c | 825 ++++++++++++++++++++++ drivers/net/wireless/ath/wil6210/txrx.h | 352 ++++++++++ drivers/net/wireless/ath/wil6210/wil6210.h | 351 ++++++++++ drivers/net/wireless/ath/wil6210/wmi.c | 966 ++++++++++++++++++++++++++ drivers/net/wireless/ath/wil6210/wmi.h | 927 ++++++++++++++++++++++++ include/linux/dynamic_debug.h | 10 + include/linux/printk.h | 17 + 24 files changed, 5799 insertions(+), 4 deletions(-) create mode 100644 drivers/net/wireless/ath/wil6210/Kconfig create mode 100644 drivers/net/wireless/ath/wil6210/Makefile create mode 100644 drivers/net/wireless/ath/wil6210/cfg80211.c create mode 100644 drivers/net/wireless/ath/wil6210/debugfs.c create mode 100644 drivers/net/wireless/ath/wil6210/interrupt.c create mode 100644 drivers/net/wireless/ath/wil6210/main.c create mode 100644 drivers/net/wireless/ath/wil6210/netdev.c create mode 100644 drivers/net/wireless/ath/wil6210/pcie_bus.c create mode 100644 drivers/net/wireless/ath/wil6210/sysfs.c create mode 100644 drivers/net/wireless/ath/wil6210/txrx.c create mode 100644 drivers/net/wireless/ath/wil6210/txrx.h create mode 100644 drivers/net/wireless/ath/wil6210/wil6210.h create mode 100644 drivers/net/wireless/ath/wil6210/wmi.c create mode 100644 drivers/net/wireless/ath/wil6210/wmi.h -- 1.7.10.4