Return-path: Received: from mms1.broadcom.com ([216.31.210.17]:1657 "EHLO mms1.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752001Ab2KFAWp (ORCPT ); Mon, 5 Nov 2012 19:22:45 -0500 From: "Franky Lin" To: linville@tuxdriver.com cc: linux-wireless@vger.kernel.org, "Hante Meuleman" Subject: [PATCH 05/24] brcmfmac: remove obsolete i-scan and clean up related code. Date: Mon, 5 Nov 2012 16:22:13 -0800 Message-ID: <1352161352-30405-6-git-send-email-frankyl@broadcom.com> (sfid-20121106_013115_759662_7EA65EFA) In-Reply-To: <1352161352-30405-1-git-send-email-frankyl@broadcom.com> References: <1352161352-30405-1-git-send-email-frankyl@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Hante Meuleman e-scan has become the default scanning method. This patch removes the i-scan related code and cleans up e-scan related code to be always enabled. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Franky Lin --- drivers/net/wireless/brcm80211/Kconfig | 8 - drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 44 -- drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h | 9 +- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 581 +------------------- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.h | 68 +-- 5 files changed, 27 insertions(+), 683 deletions(-) diff --git a/drivers/net/wireless/brcm80211/Kconfig b/drivers/net/wireless/brcm80211/Kconfig index c9d811e..b480088 100644 --- a/drivers/net/wireless/brcm80211/Kconfig +++ b/drivers/net/wireless/brcm80211/Kconfig @@ -55,14 +55,6 @@ config BRCMFMAC_USB IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to use the driver for an USB wireless card. -config BRCMISCAN - bool "Broadcom I-Scan (OBSOLETE)" - depends on BRCMFMAC - ---help--- - This option enables the I-Scan method. By default fullmac uses the - new E-Scan method which uses less memory in firmware and gives no - limitation on the number of scan results. - config BRCMDBG bool "Broadcom driver debug functions" depends on BRCMSMAC || BRCMFMAC diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 8704daa..34bad32 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -100,19 +100,6 @@ #define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff #define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16 -#define BRCMF_SCAN_ACTION_START 1 -#define BRCMF_SCAN_ACTION_CONTINUE 2 -#define WL_SCAN_ACTION_ABORT 3 - -#define BRCMF_ISCAN_REQ_VERSION 1 - -/* brcmf_iscan_results status values */ -#define BRCMF_SCAN_RESULTS_SUCCESS 0 -#define BRCMF_SCAN_RESULTS_PARTIAL 1 -#define BRCMF_SCAN_RESULTS_PENDING 2 -#define BRCMF_SCAN_RESULTS_ABORTED 3 -#define BRCMF_SCAN_RESULTS_NO_MEM 4 - /* Indicates this key is using soft encrypt */ #define WL_SOFT_KEY (1 << 0) /* primary (ie tx) key */ @@ -452,14 +439,6 @@ struct brcmf_scan_params_le { __le16 channel_list[1]; /* list of chanspecs */ }; -/* incremental scan struct */ -struct brcmf_iscan_params_le { - __le32 version; - __le16 action; - __le16 scan_duration; - struct brcmf_scan_params_le params_le; -}; - struct brcmf_scan_results { u32 buflen; u32 version; @@ -467,12 +446,6 @@ struct brcmf_scan_results { struct brcmf_bss_info_le bss_info_le[]; }; -struct brcmf_scan_results_le { - __le32 buflen; - __le32 version; - __le32 count; -}; - struct brcmf_escan_params_le { __le32 version; __le16 action; @@ -508,23 +481,6 @@ struct brcmf_join_params { struct brcmf_assoc_params_le params_le; }; -/* incremental scan results struct */ -struct brcmf_iscan_results { - union { - u32 status; - __le32 status_le; - }; - union { - struct brcmf_scan_results results; - struct brcmf_scan_results_le results_le; - }; -}; - -/* size of brcmf_iscan_results not including variable length array */ -#define BRCMF_ISCAN_RESULTS_FIXED_SIZE \ - (sizeof(struct brcmf_scan_results) + \ - offsetof(struct brcmf_iscan_results, results)) - struct brcmf_wsec_key { u32 index; /* key index */ u32 len; /* key length */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h index eefa6c2..55a4738 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h @@ -27,11 +27,10 @@ #define BRCMF_HDRS_VAL 0x0040 #define BRCMF_BYTES_VAL 0x0080 #define BRCMF_INTR_VAL 0x0100 -#define BRCMF_GLOM_VAL 0x0400 -#define BRCMF_EVENT_VAL 0x0800 -#define BRCMF_BTA_VAL 0x1000 -#define BRCMF_ISCAN_VAL 0x2000 -#define BRCMF_FIL_VAL 0x4000 +#define BRCMF_GLOM_VAL 0x0200 +#define BRCMF_EVENT_VAL 0x0400 +#define BRCMF_BTA_VAL 0x0800 +#define BRCMF_FIL_VAL 0x1000 #if defined(DEBUG) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 94da6c9..0970c1a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -522,185 +522,6 @@ static void brcmf_set_mpc(struct net_device *ndev, int mpc) } } -static void brcmf_iscan_prep(struct brcmf_scan_params_le *params_le, - struct brcmf_ssid *ssid) -{ - memset(params_le->bssid, 0xFF, ETH_ALEN); - params_le->bss_type = DOT11_BSSTYPE_ANY; - params_le->scan_type = 0; - params_le->channel_num = 0; - params_le->nprobes = cpu_to_le32(-1); - params_le->active_time = cpu_to_le32(-1); - params_le->passive_time = cpu_to_le32(-1); - params_le->home_time = cpu_to_le32(-1); - if (ssid && ssid->SSID_len) { - params_le->ssid_le.SSID_len = cpu_to_le32(ssid->SSID_len); - memcpy(¶ms_le->ssid_le.SSID, ssid->SSID, ssid->SSID_len); - } -} - -static s32 -brcmf_run_iscan(struct brcmf_cfg80211_iscan_ctrl *iscan, - struct brcmf_ssid *ssid, u16 action) -{ - s32 params_size = BRCMF_SCAN_PARAMS_FIXED_SIZE + - offsetof(struct brcmf_iscan_params_le, params_le); - struct brcmf_iscan_params_le *params; - s32 err = 0; - - if (ssid && ssid->SSID_len) - params_size += sizeof(struct brcmf_ssid); - params = kzalloc(params_size, GFP_KERNEL); - if (!params) - return -ENOMEM; - BUG_ON(params_size >= BRCMF_DCMD_SMLEN); - - brcmf_iscan_prep(¶ms->params_le, ssid); - - params->version = cpu_to_le32(BRCMF_ISCAN_REQ_VERSION); - params->action = cpu_to_le16(action); - params->scan_duration = cpu_to_le16(0); - - err = brcmf_fil_iovar_data_set(netdev_priv(iscan->ndev), "iscan", - params, params_size); - if (err) { - if (err == -EBUSY) - WL_INFO("system busy : iscan canceled\n"); - else - WL_ERR("error (%d)\n", err); - } - - kfree(params); - return err; -} - -static s32 brcmf_do_iscan(struct brcmf_cfg80211_info *cfg) -{ - struct brcmf_cfg80211_iscan_ctrl *iscan = cfg_to_iscan(cfg); - struct net_device *ndev = cfg_to_ndev(cfg); - struct brcmf_ssid ssid; - u32 passive_scan; - s32 err = 0; - - /* Broadcast scan by default */ - memset(&ssid, 0, sizeof(ssid)); - - iscan->state = WL_ISCAN_STATE_SCANING; - - passive_scan = cfg->active_scan ? 0 : 1; - err = brcmf_fil_cmd_int_set(netdev_priv(ndev), - BRCMF_C_SET_PASSIVE_SCAN, passive_scan); - if (err) { - WL_ERR("error (%d)\n", err); - return err; - } - brcmf_set_mpc(ndev, 0); - cfg->iscan_kickstart = true; - err = brcmf_run_iscan(iscan, &ssid, BRCMF_SCAN_ACTION_START); - if (err) { - brcmf_set_mpc(ndev, 1); - cfg->iscan_kickstart = false; - return err; - } - mod_timer(&iscan->timer, jiffies + iscan->timer_ms * HZ / 1000); - iscan->timer_on = 1; - return err; -} - -static s32 -brcmf_cfg80211_iscan(struct wiphy *wiphy, struct net_device *ndev, - struct cfg80211_scan_request *request, - struct cfg80211_ssid *this_ssid) -{ - struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_cfg80211_info *cfg = ndev_to_cfg(ndev); - struct cfg80211_ssid *ssids; - struct brcmf_cfg80211_scan_req *sr = cfg->scan_req_int; - u32 passive_scan; - bool iscan_req; - bool spec_scan; - s32 err = 0; - u32 SSID_len; - - if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { - WL_ERR("Scanning already: status (%lu)\n", cfg->scan_status); - return -EAGAIN; - } - if (test_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status)) { - WL_ERR("Scanning being aborted: status (%lu)\n", - cfg->scan_status); - return -EAGAIN; - } - if (test_bit(BRCMF_VIF_STATUS_CONNECTING, &ifp->vif->sme_state)) { - WL_ERR("Connecting: status (%lu)\n", ifp->vif->sme_state); - return -EAGAIN; - } - - iscan_req = false; - spec_scan = false; - if (request) { - /* scan bss */ - ssids = request->ssids; - if (cfg->iscan_on && (!ssids || !ssids->ssid_len)) - iscan_req = true; - } else { - /* scan in ibss */ - /* we don't do iscan in ibss */ - ssids = this_ssid; - } - - cfg->scan_request = request; - set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); - if (iscan_req) { - err = brcmf_do_iscan(cfg); - if (!err) - return err; - else - goto scan_out; - } else { - WL_SCAN("ssid \"%s\", ssid_len (%d)\n", - ssids->ssid, ssids->ssid_len); - memset(&sr->ssid_le, 0, sizeof(sr->ssid_le)); - SSID_len = min_t(u8, sizeof(sr->ssid_le.SSID), ssids->ssid_len); - sr->ssid_le.SSID_len = cpu_to_le32(0); - if (SSID_len) { - memcpy(sr->ssid_le.SSID, ssids->ssid, SSID_len); - sr->ssid_le.SSID_len = cpu_to_le32(SSID_len); - spec_scan = true; - } else { - WL_SCAN("Broadcast scan\n"); - } - - passive_scan = cfg->active_scan ? 0 : 1; - err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PASSIVE_SCAN, - passive_scan); - if (err) { - WL_ERR("WLC_SET_PASSIVE_SCAN error (%d)\n", err); - goto scan_out; - } - brcmf_set_mpc(ndev, 0); - err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN, - &sr->ssid_le, sizeof(sr->ssid_le)); - if (err) { - if (err == -EBUSY) - WL_INFO("system busy : scan for \"%s\" " - "canceled\n", sr->ssid_le.SSID); - else - WL_ERR("WLC_SCAN error (%d)\n", err); - - brcmf_set_mpc(ndev, 1); - goto scan_out; - } - } - - return 0; - -scan_out: - clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status); - cfg->scan_request = NULL; - return err; -} - static void brcmf_escan_prep(struct brcmf_scan_params_le *params_le, struct cfg80211_scan_request *request) { @@ -924,7 +745,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev, struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_cfg80211_info *cfg = ndev_to_cfg(ndev); struct cfg80211_ssid *ssids; - struct brcmf_cfg80211_scan_req *sr = cfg->scan_req_int; + struct brcmf_cfg80211_scan_req *sr = &cfg->scan_req_int; u32 passive_scan; bool escan_req; bool spec_scan; @@ -1018,7 +839,6 @@ static s32 brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request) { struct net_device *ndev = request->wdev->netdev; - struct brcmf_cfg80211_info *cfg = ndev_to_cfg(ndev); s32 err = 0; WL_TRACE("Enter\n"); @@ -1027,10 +847,7 @@ brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request) struct brcmf_cfg80211_vif, wdev))) return -EIO; - if (cfg->iscan_on) - err = brcmf_cfg80211_iscan(wiphy, ndev, request, NULL); - else if (cfg->escan_on) - err = brcmf_cfg80211_escan(wiphy, ndev, request, NULL); + err = brcmf_cfg80211_escan(wiphy, ndev, request, NULL); if (err) WL_ERR("scan error (%d)\n", err); @@ -2352,7 +2169,7 @@ static s32 brcmf_inform_bss(struct brcmf_cfg80211_info *cfg) return -EOPNOTSUPP; } WL_SCAN("scanned AP count (%d)\n", bss_list->count); - for (i = 0; i < bss_list->count && i < WL_AP_MAX; i++) { + for (i = 0; i < bss_list->count; i++) { bi = next_bss_le(bss_list, bi); err = brcmf_inform_single_bss(cfg, bi); if (err) @@ -2574,33 +2391,10 @@ update_bss_info_out: static void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg) { - struct brcmf_cfg80211_iscan_ctrl *iscan = cfg_to_iscan(cfg); struct escan_info *escan = &cfg->escan_info; - struct brcmf_ssid ssid; set_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status); - if (cfg->iscan_on) { - iscan->state = WL_ISCAN_STATE_IDLE; - - if (iscan->timer_on) { - del_timer_sync(&iscan->timer); - iscan->timer_on = 0; - } - - cancel_work_sync(&iscan->work); - - /* Abort iscan running in FW */ - memset(&ssid, 0, sizeof(ssid)); - brcmf_run_iscan(iscan, &ssid, WL_SCAN_ACTION_ABORT); - - if (cfg->scan_request) { - /* Indidate scan abort to cfg80211 layer */ - WL_INFO("Terminating scan in progress\n"); - cfg80211_scan_done(cfg->scan_request, true); - cfg->scan_request = NULL; - } - } - if (cfg->escan_on && cfg->scan_request) { + if (cfg->scan_request) { escan->escan_state = WL_ESCAN_STATE_IDLE; brcmf_notify_escan_complete(cfg, escan->ndev, true, true); } @@ -2608,198 +2402,6 @@ static void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg) clear_bit(BRCMF_SCAN_STATUS_ABORT, &cfg->scan_status); } -static void brcmf_notify_iscan_complete(struct brcmf_cfg80211_iscan_ctrl *iscan, - bool aborted) -{ - struct brcmf_cfg80211_info *cfg = iscan_to_cfg(iscan); - struct net_device *ndev = cfg_to_ndev(cfg); - - if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { - WL_ERR("Scan complete while device not scanning\n"); - return; - } - if (cfg->scan_request) { - WL_SCAN("ISCAN Completed scan: %s\n", - aborted ? "Aborted" : "Done"); - cfg80211_scan_done(cfg->scan_request, aborted); - brcmf_set_mpc(ndev, 1); - cfg->scan_request = NULL; - } - cfg->iscan_kickstart = false; -} - -static s32 brcmf_wakeup_iscan(struct brcmf_cfg80211_iscan_ctrl *iscan) -{ - if (iscan->state != WL_ISCAN_STATE_IDLE) { - WL_SCAN("wake up iscan\n"); - schedule_work(&iscan->work); - return 0; - } - - return -EIO; -} - -static s32 -brcmf_get_iscan_results(struct brcmf_cfg80211_iscan_ctrl *iscan, u32 *status, - struct brcmf_scan_results **bss_list) -{ - struct brcmf_scan_results *results; - struct brcmf_scan_results_le *results_le; - struct brcmf_iscan_results *list_buf; - s32 err = 0; - - memset(iscan->scan_buf, 0, WL_ISCAN_BUF_MAX); - list_buf = (struct brcmf_iscan_results *)iscan->scan_buf; - results = &list_buf->results; - results_le = &list_buf->results_le; - results_le->buflen = cpu_to_le32(sizeof(iscan->scan_buf)); - results_le->version = 0; - results_le->count = 0; - - err = brcmf_fil_iovar_data_get(netdev_priv(iscan->ndev), "iscanresults", - iscan->scan_buf, - sizeof(iscan->scan_buf)); - if (err) { - WL_ERR("error (%d)\n", err); - return err; - } - results->buflen = le32_to_cpu(results_le->buflen); - results->version = le32_to_cpu(results_le->version); - results->count = le32_to_cpu(results_le->count); - WL_SCAN("results->count = %d\n", results_le->count); - WL_SCAN("results->buflen = %d\n", results_le->buflen); - *status = le32_to_cpu(list_buf->status_le); - WL_SCAN("status = %d\n", *status); - *bss_list = results; - - return err; -} - -static s32 brcmf_iscan_done(struct brcmf_cfg80211_info *cfg) -{ - struct brcmf_cfg80211_iscan_ctrl *iscan = cfg->iscan; - s32 err = 0; - - iscan->state = WL_ISCAN_STATE_IDLE; - brcmf_inform_bss(cfg); - brcmf_notify_iscan_complete(iscan, false); - - return err; -} - -static s32 brcmf_iscan_pending(struct brcmf_cfg80211_info *cfg) -{ - struct brcmf_cfg80211_iscan_ctrl *iscan = cfg->iscan; - s32 err = 0; - - /* Reschedule the timer */ - mod_timer(&iscan->timer, jiffies + iscan->timer_ms * HZ / 1000); - iscan->timer_on = 1; - - return err; -} - -static s32 brcmf_iscan_inprogress(struct brcmf_cfg80211_info *cfg) -{ - struct brcmf_cfg80211_iscan_ctrl *iscan = cfg->iscan; - s32 err = 0; - - brcmf_inform_bss(cfg); - brcmf_run_iscan(iscan, NULL, BRCMF_SCAN_ACTION_CONTINUE); - /* Reschedule the timer */ - mod_timer(&iscan->timer, jiffies + iscan->timer_ms * HZ / 1000); - iscan->timer_on = 1; - - return err; -} - -static s32 brcmf_iscan_aborted(struct brcmf_cfg80211_info *cfg) -{ - struct brcmf_cfg80211_iscan_ctrl *iscan = cfg->iscan; - s32 err = 0; - - iscan->state = WL_ISCAN_STATE_IDLE; - brcmf_notify_iscan_complete(iscan, true); - - return err; -} - -static void brcmf_cfg80211_iscan_handler(struct work_struct *work) -{ - struct brcmf_cfg80211_iscan_ctrl *iscan = - container_of(work, struct brcmf_cfg80211_iscan_ctrl, - work); - struct brcmf_cfg80211_info *cfg = iscan_to_cfg(iscan); - struct brcmf_cfg80211_iscan_eloop *el = &iscan->el; - u32 status = BRCMF_SCAN_RESULTS_PARTIAL; - - if (iscan->timer_on) { - del_timer_sync(&iscan->timer); - iscan->timer_on = 0; - } - - if (brcmf_get_iscan_results(iscan, &status, &cfg->bss_list)) { - status = BRCMF_SCAN_RESULTS_ABORTED; - WL_ERR("Abort iscan\n"); - } - - el->handler[status](cfg); -} - -static void brcmf_iscan_timer(unsigned long data) -{ - struct brcmf_cfg80211_iscan_ctrl *iscan = - (struct brcmf_cfg80211_iscan_ctrl *)data; - - if (iscan) { - iscan->timer_on = 0; - WL_SCAN("timer expired\n"); - brcmf_wakeup_iscan(iscan); - } -} - -static s32 brcmf_invoke_iscan(struct brcmf_cfg80211_info *cfg) -{ - struct brcmf_cfg80211_iscan_ctrl *iscan = cfg_to_iscan(cfg); - - if (cfg->iscan_on) { - iscan->state = WL_ISCAN_STATE_IDLE; - INIT_WORK(&iscan->work, brcmf_cfg80211_iscan_handler); - } - - return 0; -} - -static void brcmf_init_iscan_eloop(struct brcmf_cfg80211_iscan_eloop *el) -{ - memset(el, 0, sizeof(*el)); - el->handler[BRCMF_SCAN_RESULTS_SUCCESS] = brcmf_iscan_done; - el->handler[BRCMF_SCAN_RESULTS_PARTIAL] = brcmf_iscan_inprogress; - el->handler[BRCMF_SCAN_RESULTS_PENDING] = brcmf_iscan_pending; - el->handler[BRCMF_SCAN_RESULTS_ABORTED] = brcmf_iscan_aborted; - el->handler[BRCMF_SCAN_RESULTS_NO_MEM] = brcmf_iscan_aborted; -} - -static s32 brcmf_init_iscan(struct brcmf_cfg80211_info *cfg) -{ - struct brcmf_cfg80211_iscan_ctrl *iscan = cfg_to_iscan(cfg); - int err = 0; - - if (cfg->iscan_on) { - iscan->ndev = cfg_to_ndev(cfg); - brcmf_init_iscan_eloop(&iscan->el); - iscan->timer_ms = WL_ISCAN_TIMER_INTERVAL_MS; - init_timer(&iscan->timer); - iscan->timer.data = (unsigned long) iscan; - iscan->timer.function = brcmf_iscan_timer; - err = brcmf_invoke_iscan(cfg); - if (!err) - iscan->data = cfg; - } - - return err; -} - static void brcmf_cfg80211_escan_timeout_worker(struct work_struct *work) { struct brcmf_cfg80211_info *cfg = @@ -2817,8 +2419,7 @@ static void brcmf_escan_timeout(unsigned long data) if (cfg->scan_request) { WL_ERR("timer expired\n"); - if (cfg->escan_on) - schedule_work(&cfg->escan_timeout_work); + schedule_work(&cfg->escan_timeout_work); } } @@ -2871,11 +2472,9 @@ brcmf_cfg80211_escan_handler(struct brcmf_cfg80211_info *cfg, status = be32_to_cpu(e->status); - if (!ndev || !cfg->escan_on || - !test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { - WL_ERR("scan not ready ndev %p wl->escan_on %d drv_status %x\n", - ndev, cfg->escan_on, - !test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)); + if (!ndev || !test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { + WL_ERR("scan not ready ndev %p drv_status %x\n", ndev, + !test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)); return -EPERM; } @@ -2953,17 +2552,15 @@ exit: static void brcmf_init_escan(struct brcmf_cfg80211_info *cfg) { - if (cfg->escan_on) { - cfg->el.handler[BRCMF_E_ESCAN_RESULT] = - brcmf_cfg80211_escan_handler; - cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE; - /* Init scan_timeout timer */ - init_timer(&cfg->escan_timeout); - cfg->escan_timeout.data = (unsigned long) cfg; - cfg->escan_timeout.function = brcmf_escan_timeout; - INIT_WORK(&cfg->escan_timeout_work, - brcmf_cfg80211_escan_timeout_worker); - } + cfg->el.handler[BRCMF_E_ESCAN_RESULT] = + brcmf_cfg80211_escan_handler; + cfg->escan_info.escan_state = WL_ESCAN_STATE_IDLE; + /* Init scan_timeout timer */ + init_timer(&cfg->escan_timeout); + cfg->escan_timeout.data = (unsigned long) cfg; + cfg->escan_timeout.function = brcmf_escan_timeout; + INIT_WORK(&cfg->escan_timeout_work, + brcmf_cfg80211_escan_timeout_worker); } static __always_inline void brcmf_delay(u32 ms) @@ -2978,20 +2575,8 @@ static __always_inline void brcmf_delay(u32 ms) static s32 brcmf_cfg80211_resume(struct wiphy *wiphy) { - struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); - struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); - - /* - * Check for BRCMF_VIF_STATUS_READY before any function call which - * could result is bus access. Don't block the resume for - * any driver error conditions - */ WL_TRACE("Enter\n"); - if (check_vif_up(ifp->vif)) - brcmf_invoke_iscan(cfg); - - WL_TRACE("Exit\n"); return 0; } @@ -3301,7 +2886,6 @@ out_err: return err; } -#ifndef CONFIG_BRCMISCAN static int brcmf_dev_pno_clean(struct net_device *ndev) { int ret; @@ -3438,7 +3022,6 @@ static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy, brcmf_notify_escan_complete(cfg, ndev, true, true); return 0; } -#endif /* CONFIG_BRCMISCAN */ #ifdef CONFIG_NL80211_TESTMODE static int brcmf_cfg80211_testmode(struct wiphy *wiphy, void *data, int len) @@ -4146,11 +3729,8 @@ static struct cfg80211_ops wl_cfg80211_ops = { .start_ap = brcmf_cfg80211_start_ap, .stop_ap = brcmf_cfg80211_stop_ap, .del_station = brcmf_cfg80211_del_station, -#ifndef CONFIG_BRCMISCAN - /* scheduled scan need e-scan, which is mutual exclusive with i-scan */ .sched_scan_start = brcmf_cfg80211_sched_scan_start, .sched_scan_stop = brcmf_cfg80211_sched_scan_stop, -#endif #ifdef CONFIG_NL80211_TESTMODE .testmode_cmd = brcmf_cfg80211_testmode #endif @@ -4174,13 +3754,11 @@ static s32 brcmf_mode_to_nl80211_iftype(s32 mode) static void brcmf_wiphy_pno_params(struct wiphy *wiphy) { -#ifndef CONFIG_BRCMFISCAN /* scheduled scan settings */ wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT; wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT; wiphy->max_sched_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX; wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; -#endif } static struct wiphy *brcmf_setup_wiphy(struct device *phydev) @@ -4625,78 +4203,6 @@ brcmf_notify_mic_status(struct brcmf_cfg80211_info *cfg, return 0; } -static s32 -brcmf_notify_scan_status(struct brcmf_cfg80211_info *cfg, - struct net_device *ndev, - const struct brcmf_event_msg *e, void *data) -{ - struct brcmf_if *ifp = netdev_priv(ndev); - struct brcmf_channel_info_le channel_inform_le; - struct brcmf_scan_results_le *bss_list_le; - u32 len = WL_SCAN_BUF_MAX; - s32 err = 0; - bool scan_abort = false; - u32 scan_channel; - - WL_TRACE("Enter\n"); - - if (cfg->iscan_on && cfg->iscan_kickstart) { - WL_TRACE("Exit\n"); - return brcmf_wakeup_iscan(cfg_to_iscan(cfg)); - } - - if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { - WL_ERR("Scan complete while device not scanning\n"); - scan_abort = true; - err = -EINVAL; - goto scan_done_out; - } - - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL, - &channel_inform_le, - sizeof(channel_inform_le)); - if (err) { - WL_ERR("scan busy (%d)\n", err); - scan_abort = true; - goto scan_done_out; - } - scan_channel = le32_to_cpu(channel_inform_le.scan_channel); - if (scan_channel) - WL_CONN("channel_inform.scan_channel (%d)\n", scan_channel); - cfg->bss_list = cfg->scan_results; - bss_list_le = (struct brcmf_scan_results_le *) cfg->bss_list; - - memset(cfg->scan_results, 0, len); - bss_list_le->buflen = cpu_to_le32(len); - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_SCAN_RESULTS, - cfg->scan_results, len); - if (err) { - WL_ERR("%s Scan_results error (%d)\n", ndev->name, err); - err = -EINVAL; - scan_abort = true; - goto scan_done_out; - } - cfg->scan_results->buflen = le32_to_cpu(bss_list_le->buflen); - cfg->scan_results->version = le32_to_cpu(bss_list_le->version); - cfg->scan_results->count = le32_to_cpu(bss_list_le->count); - - err = brcmf_inform_bss(cfg); - if (err) - scan_abort = true; - -scan_done_out: - if (cfg->scan_request) { - WL_SCAN("calling cfg80211_scan_done\n"); - cfg80211_scan_done(cfg->scan_request, scan_abort); - brcmf_set_mpc(ndev, 1); - cfg->scan_request = NULL; - } - - WL_TRACE("Exit\n"); - - return err; -} - static void brcmf_init_conf(struct brcmf_cfg80211_conf *conf) { conf->mode = (u32)-1; @@ -4710,7 +4216,6 @@ static void brcmf_init_conf(struct brcmf_cfg80211_conf *conf) static void brcmf_init_eloop_handler(struct brcmf_cfg80211_event_loop *el) { memset(el, 0, sizeof(*el)); - el->handler[BRCMF_E_SCAN_COMPLETE] = brcmf_notify_scan_status; el->handler[BRCMF_E_LINK] = brcmf_notify_connect_status; el->handler[BRCMF_E_DEAUTH_IND] = brcmf_notify_connect_status; el->handler[BRCMF_E_DEAUTH] = brcmf_notify_connect_status; @@ -4725,53 +4230,27 @@ static void brcmf_init_eloop_handler(struct brcmf_cfg80211_event_loop *el) static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) { - kfree(cfg->scan_results); - cfg->scan_results = NULL; - kfree(cfg->bss_info); - cfg->bss_info = NULL; kfree(cfg->conf); cfg->conf = NULL; - kfree(cfg->scan_req_int); - cfg->scan_req_int = NULL; kfree(cfg->escan_ioctl_buf); cfg->escan_ioctl_buf = NULL; - kfree(cfg->dcmd_buf); - cfg->dcmd_buf = NULL; kfree(cfg->extra_buf); cfg->extra_buf = NULL; - kfree(cfg->iscan); - cfg->iscan = NULL; kfree(cfg->pmk_list); cfg->pmk_list = NULL; } static s32 brcmf_init_priv_mem(struct brcmf_cfg80211_info *cfg) { - cfg->scan_results = kzalloc(WL_SCAN_BUF_MAX, GFP_KERNEL); - if (!cfg->scan_results) - goto init_priv_mem_out; cfg->conf = kzalloc(sizeof(*cfg->conf), GFP_KERNEL); if (!cfg->conf) goto init_priv_mem_out; - cfg->bss_info = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); - if (!cfg->bss_info) - goto init_priv_mem_out; - cfg->scan_req_int = kzalloc(sizeof(*cfg->scan_req_int), - GFP_KERNEL); - if (!cfg->scan_req_int) - goto init_priv_mem_out; cfg->escan_ioctl_buf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL); if (!cfg->escan_ioctl_buf) goto init_priv_mem_out; - cfg->dcmd_buf = kzalloc(WL_DCMD_LEN_MAX, GFP_KERNEL); - if (!cfg->dcmd_buf) - goto init_priv_mem_out; cfg->extra_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL); if (!cfg->extra_buf) goto init_priv_mem_out; - cfg->iscan = kzalloc(sizeof(*cfg->iscan), GFP_KERNEL); - if (!cfg->iscan) - goto init_priv_mem_out; cfg->pmk_list = kzalloc(sizeof(*cfg->pmk_list), GFP_KERNEL); if (!cfg->pmk_list) goto init_priv_mem_out; @@ -4899,21 +4378,8 @@ static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg) cfg->scan_request = NULL; cfg->pwr_save = true; -#ifdef CONFIG_BRCMISCAN - cfg->iscan_on = true; /* iscan on & off switch. - we enable iscan per default */ - cfg->escan_on = false; /* escan on & off switch. - we disable escan per default */ -#else - cfg->iscan_on = false; /* iscan on & off switch. - we disable iscan per default */ - cfg->escan_on = true; /* escan on & off switch. - we enable escan per default */ -#endif cfg->roam_on = true; /* roam on & off switch. we enable roam per default */ - - cfg->iscan_kickstart = false; cfg->active_scan = true; /* we do active scan for specific scan per default */ cfg->dongle_up = false; /* dongle is not up yet */ @@ -4924,9 +4390,6 @@ static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg) INIT_WORK(&cfg->event_work, brcmf_cfg80211_event_handler); brcmf_init_eloop_handler(&cfg->el); mutex_init(&cfg->usr_sync); - err = brcmf_init_iscan(cfg); - if (err) - return err; brcmf_init_escan(cfg); brcmf_init_conf(cfg->conf); brcmf_link_down(cfg); @@ -5044,7 +4507,6 @@ static s32 brcmf_dongle_eventmsg(struct net_device *ndev) setbit(eventmask, BRCMF_E_PMKID_CACHE); setbit(eventmask, BRCMF_E_TXFAIL); setbit(eventmask, BRCMF_E_JOIN_START); - setbit(eventmask, BRCMF_E_SCAN_COMPLETE); setbit(eventmask, BRCMF_E_ESCAN_RESULT); setbit(eventmask, BRCMF_E_PFN_NET_FOUND); @@ -5236,17 +4698,10 @@ default_conf_out: static s32 __brcmf_cfg80211_up(struct brcmf_cfg80211_info *cfg) { struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg)); - s32 err = 0; set_bit(BRCMF_VIF_STATUS_READY, &ifp->vif->sme_state); - err = brcmf_config_dongle(cfg); - if (err) - return err; - - brcmf_invoke_iscan(cfg); - - return err; + return brcmf_config_dongle(cfg); } static s32 __brcmf_cfg80211_down(struct brcmf_cfg80211_info *cfg) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index d7d473c..3c59931 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -84,31 +84,12 @@ do { \ #define WL_CONN(fmt, args...) #endif /* (defined DEBUG) */ -#define WL_NUM_SCAN_MAX 1 -#define WL_NUM_PMKIDS_MAX MAXPMKID /* will be used - * for 2.6.33 kernel - * or later - */ -#define WL_SCAN_BUF_MAX (1024 * 8) +#define WL_NUM_SCAN_MAX 10 +#define WL_NUM_PMKIDS_MAX MAXPMKID #define WL_TLV_INFO_MAX 1024 #define WL_BSS_INFO_MAX 2048 -#define WL_ASSOC_INFO_MAX 512 /* - * needs to grab assoc info from dongle to - * report it to cfg80211 through "connect" - * event - */ -#define WL_DCMD_LEN_MAX 1024 -#define WL_EXTRA_BUF_MAX 2048 -#define WL_ISCAN_BUF_MAX 2048 /* - * the buf length can be BRCMF_DCMD_MAXLEN - * to reduce iteration - */ -#define WL_ISCAN_TIMER_INTERVAL_MS 3000 -#define WL_SCAN_ERSULTS_LAST (BRCMF_SCAN_RESULTS_NO_MEM+1) -#define WL_AP_MAX 256 /* virtually unlimitted as long - * as kernel memory allows - */ - +#define WL_ASSOC_INFO_MAX 512 /* assoc related fil max buf */ +#define WL_EXTRA_BUF_MAX 2048 #define WL_ROAM_TRIGGER_LEVEL -75 #define WL_ROAM_DELTA 20 #define WL_BEACON_TIMEOUT 3 @@ -145,12 +126,6 @@ enum wl_mode { WL_MODE_AP }; -/* dongle iscan state */ -enum wl_iscan_state { - WL_ISCAN_STATE_IDLE, - WL_ISCAN_STATE_SCANING -}; - /* dongle configuration */ struct brcmf_cfg80211_conf { u32 mode; /* adhoc , infrastructure or ap */ @@ -270,26 +245,6 @@ struct brcmf_cfg80211_vif { struct list_head list; }; -/* dongle iscan event loop */ -struct brcmf_cfg80211_iscan_eloop { - s32 (*handler[WL_SCAN_ERSULTS_LAST]) - (struct brcmf_cfg80211_info *cfg); -}; - -/* dongle iscan controller */ -struct brcmf_cfg80211_iscan_ctrl { - struct net_device *ndev; - struct timer_list timer; - u32 timer_ms; - u32 timer_on; - s32 state; - struct work_struct work; - struct brcmf_cfg80211_iscan_eloop el; - void *data; - s8 dcmd_buf[BRCMF_DCMD_SMLEN]; - s8 scan_buf[WL_ISCAN_BUF_MAX]; -}; - /* association inform */ struct brcmf_cfg80211_connect_info { u8 *req_ie; @@ -415,19 +370,15 @@ struct brcmf_pno_scanresults_le { * @evt_q_lock: for event queue synchronization. * @usr_sync: mainly for dongle up/down synchronization. * @bss_list: bss_list holding scanned ap information. - * @scan_results: results of the last scan. * @scan_req_int: internal scan request object. * @bss_info: bss information for cfg80211 layer. * @ie: information element object for internal purpose. - * @iscan: iscan controller information. * @conn_info: association info. * @pmk_list: wpa2 pmk list. * @event_work: event handler work struct. * @scan_status: scan activity on the dongle. * @pub: common driver information. * @channel: current channel. - * @iscan_on: iscan on/off switch. - * @iscan_kickstart: indicate iscan already started. * @active_scan: current scan mode. * @sched_escan: e-scan for scheduled scan support running. * @ibss_starter: indicates this sta is ibss starter. @@ -439,7 +390,6 @@ struct brcmf_pno_scanresults_le { * @dcmd_buf: dcmd buffer. * @extra_buf: mainly to grab assoc information. * @debugfsdir: debugfs folder for this device. - * @escan_on: escan on/off switch. * @escan_info: escan information. * @escan_timeout: Timer for catch scan timeout. * @escan_timeout_work: scan timeout worker. @@ -456,19 +406,15 @@ struct brcmf_cfg80211_info { spinlock_t evt_q_lock; struct mutex usr_sync; struct brcmf_scan_results *bss_list; - struct brcmf_scan_results *scan_results; - struct brcmf_cfg80211_scan_req *scan_req_int; + struct brcmf_cfg80211_scan_req scan_req_int; struct wl_cfg80211_bss_info *bss_info; struct brcmf_cfg80211_ie ie; - struct brcmf_cfg80211_iscan_ctrl *iscan; struct brcmf_cfg80211_connect_info conn_info; struct brcmf_cfg80211_pmk_list *pmk_list; struct work_struct event_work; unsigned long scan_status; struct brcmf_pub *pub; u32 channel; - bool iscan_on; - bool iscan_kickstart; bool active_scan; bool sched_escan; bool ibss_starter; @@ -480,7 +426,6 @@ struct brcmf_cfg80211_info { u8 *dcmd_buf; u8 *extra_buf; struct dentry *debugfsdir; - bool escan_on; struct escan_info escan_info; struct timer_list escan_timeout; struct work_struct escan_timeout_work; @@ -523,9 +468,6 @@ static inline struct brcmf_cfg80211_profile *ndev_to_prof(struct net_device *nd) return &ifp->vif->profile; } -#define iscan_to_cfg(i) ((struct brcmf_cfg80211_info *)(i->data)) -#define cfg_to_iscan(w) (w->iscan) - static inline struct brcmf_cfg80211_connect_info *cfg_to_conn(struct brcmf_cfg80211_info *cfg) { -- 1.7.9.5