From: "Walter Robert Ditzler" <ditwal001@gmail.com>
To: "'Adrian Chadd'" <adrian@freebsd.org>
Cc: <linux-wireless@vger.kernel.org>
References: <!&!AAAAAAAAAAAYAAAAAAAAAOJK0u4CH31Kl5v1RPAzyrZCgQAAEAAAAPZ+jv3Bp7FBumOZuSWcpNUBAAAAAA==@gmail.com> <!&!AAAAAAAAAAAYAAAAAAAAAOJK0u4CH31Kl5v1RPAzyrZCgQAAEAAAAPHUAOFX2ZxCslfE3J6mUdcBAAAAAA==@gmail.com> <CAJ-Vmo=g4SD01b+jwpKXAw5mGrTdyXV7MGZJMMxVEK26q1kT1Q@mail.gmail.com>
In-Reply-To: <CAJ-Vmo=g4SD01b+jwpKXAw5mGrTdyXV7MGZJMMxVEK26q1kT1Q@mail.gmail.com>
Subject: RE: WLAN UB-5 AR5414 (5GHz)
Date: Mon, 19 Nov 2012 13:18:22 +0100
Message-ID: <!&!AAAAAAAAAAAYAAAAAAAAAOJK0u4CH31Kl5v1RPAzyrZCgQAAEAAAAIEGFD8YcEJMq5R4rRLxB3EBAAAAAA==@gmail.com> (sfid-20121119_131832_404970_EC55A921)
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Sender: linux-wireless-owner@vger.kernel.org

hi adrian,

thank you very much - you saved my life indeed :) i am still a green horn
related to linux wireless - i just didnt see the point, but luckly buth
cards (5ghz) works now perfectly!

have a nice day,

walter

-----Original Message-----
From: adrian.chadd@gmail.com [mailto:adrian.chadd@gmail.com] On Behalf Of
Adrian Chadd
Sent: Montag, 19. November 2012 03:39
To: Walter Robert Ditzler
Cc: linux-wireless@vger.kernel.org
Subject: Re: WLAN UB-5 AR5414 (5GHz)

The default regdomain 0x0 is giving you a "world" regulatory configuration,
which ends up disabling IBSS/hostap for 5GHz mode (ie, all channels are
passive.)


Adrian


On 18 November 2012 17:56, Walter Robert Ditzler <ditwal001@gmail.com>
wrote:
> hi there,
>
> i can't get the WLAN UB-5 AR5414 (5GHz) to run. i tried:
>
> ***
> ifconfig wlan0 down
> iw dev wlan0 del
> iw phy phy0 interface add wlan0 type adhoc iwconfig wlan0 mode ad-hoc 
> essid xxxh ap 00:00:00:78:9a:bc channel 48 ifconfig mesh0 10.10.10.2 
> up
> ***
>
> and i tried with hostapd
>
> **
> interface=wlan0
> driver=nl80211
> ssid=xxx
> hw_mode=a
> channel=48
> ***
>
> nothing happend. i also cant get a dump oft he card. my hardware is 
> alix2d2, debian 6.0.6, kernel 3.6.5, cf install with flashybrid.
>
> thanks a lot for help,
>
> walter.
>
>
>
> *** iwconfig
> root@srv-ldeb-mesh01:~# iwconfig
> ip_vti0   no wireless extensions.
>
> gre0      no wireless extensions.
>
> wlan0     IEEE 802.11a  Mode:Master  Tx-Power=0 dBm
>           Retry  long limit:7   RTS thr:off   Fragment thr:off
>           Power Management:on
>
> lo        no wireless extensions.
>
> eth0      no wireless extensions.
>
> eth1      no wireless extensions.
>
> wlan1     IEEE 802.11abgn  Mode:Master  Tx-Power=20 dBm
>           Retry  long limit:7   RTS thr:off   Fragment thr:off
>           Power Management:on
>
> tunl0     no wireless extensions.
> ***
>
> *** iw list
> root@srv-ldeb-mesh01:~# iw list
> Wiphy phy1
>         Band 1:
>                 Frequencies:
>                         * 5040 MHz [8] (disabled)
>                         * 5060 MHz [12] (disabled)
>                         * 5080 MHz [16] (disabled)
>                         * 5180 MHz [36] (20.0 dBm) (passive scanning, 
> no
> IBSS)
>                         * 5200 MHz [40] (20.0 dBm) (passive scanning, 
> no
> IBSS)
>                         * 5220 MHz [44] (20.0 dBm) (passive scanning, 
> no
> IBSS)
>                         * 5240 MHz [48] (20.0 dBm) (passive scanning, 
> no
> IBSS)
>                         * 5260 MHz [52] (disabled)
>                         * 5280 MHz [56] (disabled)
>                         * 5300 MHz [60] (disabled)
>                         * 5320 MHz [64] (disabled)
>                         * 5500 MHz [100] (disabled)
>                         * 5520 MHz [104] (disabled)
>                         * 5540 MHz [108] (disabled)
>                         * 5560 MHz [112] (disabled)
>                         * 5580 MHz [116] (disabled)
>                         * 5600 MHz [120] (disabled)
>                         * 5620 MHz [124] (disabled)
>                         * 5640 MHz [128] (disabled)
>                         * 5660 MHz [132] (disabled)
>                         * 5680 MHz [136] (disabled)
>                         * 5700 MHz [140] (disabled)
>                         * 5745 MHz [149] (20.0 dBm) (passive scanning, 
> no
> IBSS)
>                         * 5765 MHz [153] (20.0 dBm) (passive scanning, 
> no
> IBSS)
>                         * 5785 MHz [157] (20.0 dBm) (passive scanning, 
> no
> IBSS)
>                         * 5805 MHz [161] (20.0 dBm) (passive scanning, 
> no
> IBSS)
>                         * 5825 MHz [165] (20.0 dBm) (passive scanning, 
> no
> IBSS)
>                 Bitrates (non-HT):
>                         * 6.0 Mbps
>                         * 9.0 Mbps
>                         * 12.0 Mbps
> ***
>
> *** dmesg |grep ath
> root@srv-ldeb-mesh01:~# dmesg |grep ath
> [    5.429666] openvswitch: Open vSwitch switching datapath
> [   14.617030]  [<c104e3ff>] ? warn_slowpath_common+0xf2/0x132
> [   14.617218]  [<c104e561>] ? warn_slowpath_fmt+0x5d/0x7d
> [   17.049225] ath: EEPROM regdomain: 0x0
> [   17.049250] ath: EEPROM indicates default country code should be used
> [   17.049263] ath: doing EEPROM country->regdmn map search
> [   17.049284] ath: country maps to regdmn code: 0x3a
> [   17.049299] ath: Country alpha2 being used: US
> [   17.049313] ath: Regpair used: 0x3a
> [   17.186484] ieee80211 phy0: Selected rate control algorithm
> 'ath9k_rate_control'
> [   17.188842] Registered led device: ath9k-phy0
> [   17.232418] ath5k 0000:00:0e.0: registered as 'phy1'
> [   18.047742] ath: EEPROM regdomain: 0x0
> [   18.047767] ath: EEPROM indicates default country code should be used
> [   18.047780] ath: doing EEPROM country->regdmn map search
> [   18.047801] ath: country maps to regdmn code: 0x3a
> [   18.047816] ath: Country alpha2 being used: US
> [   18.047830] ath: Regpair used: 0x3a
> [   18.051916] ath5k: phy1: Atheros AR5414 chip found (MAC: 0xa5, PHY:
0x61)
> root@srv-ldeb-mesh01:~#
> ***