Return-path: Received: from cdptpa-omtalb.mail.rr.com ([75.180.132.120]:49410 "EHLO cdptpa-omtalb.mail.rr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752413Ab2LVXSt (ORCPT ); Sat, 22 Dec 2012 18:18:49 -0500 From: Solomon Peachy To: linux-wireless@vger.kernel.org Cc: Solomon Peachy Subject: [PATCH 16/17] cw1200: v2: kbuild integration Date: Sat, 22 Dec 2012 18:18:31 -0500 Message-Id: <1356218312-13616-17-git-send-email-pizza@shaftnet.org> (sfid-20121223_002322_661981_8883104B) In-Reply-To: <1356218312-13616-1-git-send-email-pizza@shaftnet.org> References: <1356218312-13616-1-git-send-email-pizza@shaftnet.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: Signed-off-by: Solomon Peachy --- drivers/staging/cw1200/Kconfig | 78 +++++++++++++++++++++++++++++++++++++++++ drivers/staging/cw1200/Makefile | 23 ++++++++++++ 2 files changed, 101 insertions(+) create mode 100644 drivers/staging/cw1200/Kconfig create mode 100644 drivers/staging/cw1200/Makefile diff --git a/drivers/staging/cw1200/Kconfig b/drivers/staging/cw1200/Kconfig new file mode 100644 index 0000000..6d59094 --- /dev/null +++ b/drivers/staging/cw1200/Kconfig @@ -0,0 +1,78 @@ +config CW1200 + tristate "CW1200 WLAN support" + depends on MAC80211 && CFG80211 + help + This is driver for the ST-E CW1100 & CW1200 WLAN chipsets. + This option just enables the driver core, see below for + specific bus support. + +if CW1200 + +config CW1200_WLAN_SDIO + tristate "Support SDIO platforms" + depends on CW1200 && MMC + help + This enables support for the CW1200 via an SDIO bus. + +config CW1200_WLAN_SPI + tristate "Support SPI platforms" + select CW1200_USE_GPIO_IRQ + depends on CW1200 && SPI + help + This enables support for the CW1200 via a SPI bus. + +config CW1200_NON_POWER_OF_TWO_BLOCKSIZES + bool "Platform supports non-power-of-two SDIO transfer" + depends on CW1200_SDIO + help + Say N here only if you are running the driver on a platform + which does not have support for non-power-of-two SDIO transfer. + If unsure, say Y. + +config CW1200_USE_GPIO_IRQ + bool "Use GPIO interrupt" + depends on CW1200_SDIO + help + Say Y here if you want to include GPIO IRQ support instead of + SDIO IRQ. Note that you will be limited to 1-bit SDIO operation. + If unsure, say N. + +config CW1200_POLL_IRQ + bool "Poll for data to work around irq delivery bugs" + help + You should say Y if your board has problems with IRQ delibery. + Otherwise say N. + +config CW1200_5GHZ_SUPPORT + bool "5GHz band support" + depends on CW1200 + help + Say Y if your device supports 5GHz band. Should be disabled for + CW1100 silicon. + If unsure, say N. + +config CW1200_PM + bool "Enable CW1200 advanced power management" + depends on CW1200 && PM + +menu "Driver debug features" + depends on CW1200 + +config CW1200_DEBUGFS + bool "Expose driver internals to DebugFS (DEVELOPMENT)" + +config CW1200_ETF + bool "Enable CW1200 Engineering Test Framework hooks" + depends on CW1200_DEBUGFS + help + If you don't know what this is, just say N. + +config CW1200_ITP + bool "Enable ITP access" + depends on CW1200_DEBUGFS + help + If you don't know what this is, just say N. + +endmenu + +endif diff --git a/drivers/staging/cw1200/Makefile b/drivers/staging/cw1200/Makefile new file mode 100644 index 0000000..2d5e8ad --- /dev/null +++ b/drivers/staging/cw1200/Makefile @@ -0,0 +1,23 @@ +cw1200_core-y := \ + fwio.o \ + txrx.o \ + main.o \ + queue.o \ + hwio.o \ + bh.o \ + wsm.o \ + sta.o \ + ap.o \ + scan.o +cw1200_core-$(CONFIG_CW1200_DEBUGFS) += debug.o +cw1200_core-$(CONFIG_CW1200_ITP) += itp.o +cw1200_core-$(CONFIG_CW1200_PM) += pm.o + +cw1200_wlan_sdio-y := cw1200_sdio.o +cw1200_wlan_spi-y := cw1200_spi.o + +obj-$(CONFIG_CW1200) += cw1200_core.o +obj-$(CONFIG_CW1200_WLAN_SDIO) += cw1200_wlan_sdio.o +obj-$(CONFIG_CW1200_WLAN_SPI) += cw1200_wlan_spi.o + + -- 1.7.11.7