Return-path: Received: from na3sys009aog110.obsmtp.com ([74.125.149.203]:38629 "EHLO na3sys009aog110.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751422Ab3ACH7E (ORCPT ); Thu, 3 Jan 2013 02:59:04 -0500 Date: Thu, 3 Jan 2013 13:22:56 +0530 From: Yogesh Ashok Powar To: "John W. Linville" Cc: linux-wireless , Lennert Buytenhek , Nishant Sarmukadam Subject: [PATCH 1/5] mwl8k: Enable support to support additional ampdu streams Message-ID: <20130103075252.GA20263@markyou.marvell.com> (sfid-20130103_085908_082020_CF88D649) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-wireless-owner@vger.kernel.org List-ID: Currently, we have 2 ampdu streams that can be created simultaneously. Firmware is capable of supporting additional streams. Add support to use these streams. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar --- drivers/net/wireless/mwl8k.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index c9c9c99..704d7d3 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -101,6 +101,18 @@ MODULE_PARM_DESC(ap_mode_default, #define MWL8K_MAX_TX_QUEUES (MWL8K_TX_WMM_QUEUES + MWL8K_MAX_AMPDU_QUEUES) #define mwl8k_tx_queues(priv) (MWL8K_TX_WMM_QUEUES + (priv)->num_ampdu_queues) +/* txpriorities are mapped with hw queues. + * Each hw queue has a txpriority. + */ +#define TOTAL_HW_TX_QUEUES 8 + +/* Each HW queue can have one AMPDU stream. + * But, because one of the hw queue is reserved, + * maximum AMPDU queues that can be created are + * one short of total tx queues. + */ +#define MWL8K_NUM_AMPDU_STREAMS (TOTAL_HW_TX_QUEUES - 1) + struct rxd_ops { int rxd_size; void (*rxd_init)(void *rxd, dma_addr_t next_dma_addr); @@ -1733,7 +1745,7 @@ mwl8k_add_stream(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u8 tid) struct mwl8k_priv *priv = hw->priv; int i; - for (i = 0; i < priv->num_ampdu_queues; i++) { + for (i = 0; i < MWL8K_NUM_AMPDU_STREAMS; i++) { stream = &priv->ampdu[i]; if (stream->state == AMPDU_NO_STREAM) { stream->sta = sta; @@ -1780,7 +1792,7 @@ mwl8k_lookup_stream(struct ieee80211_hw *hw, u8 *addr, u8 tid) struct mwl8k_priv *priv = hw->priv; int i; - for (i = 0 ; i < priv->num_ampdu_queues; i++) { + for (i = 0; i < MWL8K_NUM_AMPDU_STREAMS; i++) { struct mwl8k_ampdu_stream *stream; stream = &priv->ampdu[i]; if (stream->state == AMPDU_NO_STREAM) @@ -1827,6 +1839,13 @@ static inline void mwl8k_tx_count_packet(struct ieee80211_sta *sta, u8 tid) tx_stats->pkts++; } +/* The hardware ampdu queues start from 5. + * txpriorities for ampdu queues are + * 5 6 7 0 1 2 3 4 ie., queue 5 is highest + * and queue 3 is lowest (queue 4 is reserved) + */ +#define BA_QUEUE 5 + static void mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, @@ -1927,8 +1946,12 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, if (stream != NULL) { if (stream->state == AMPDU_STREAM_ACTIVE) { WARN_ON(!(qos & MWL8K_QOS_ACK_POLICY_BLOCKACK)); - txpriority = stream->idx + MWL8K_TX_WMM_QUEUES; - index = stream->idx + MWL8K_TX_WMM_QUEUES; + txpriority = (BA_QUEUE + stream->idx) % + TOTAL_HW_TX_QUEUES; + if (stream->idx <= 1) + index = stream->idx + + MWL8K_TX_WMM_QUEUES; + } else if (stream->state == AMPDU_STREAM_NEW) { /* We get here if the driver sends us packets * after we've initiated a stream, but before -- 1.8.0.3