Return-path: Received: from mail.neratec.com ([80.75.119.105]:41697 "EHLO mail.neratec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758610Ab3APJxZ (ORCPT ); Wed, 16 Jan 2013 04:53:25 -0500 Message-ID: <50F6788B.9050409@neratec.com> (sfid-20130116_114555_011992_695C247A) Date: Wed, 16 Jan 2013 10:53:15 +0100 From: Zefir Kurtisi MIME-Version: 1.0 To: Simon Wunderlich CC: Sven Eckelmann , linux-wireless@vger.kernel.org, ath9k-devel@lists.ath9k.org, Simon Wunderlich , tobias.steinicke@net.t-labs.tu-berlin.de, mathias.kretschmer@fokus.fraunhofer.de, "Chadd, Adrian" Subject: Re: [PATCH] ath9k: Save spectral scan data in network byteorder References: <1358251363-14385-1-git-send-email-sven@open-mesh.com> <20130116085931.GA13648@pandem0nium> In-Reply-To: <20130116085931.GA13648@pandem0nium> Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: On 01/16/2013 09:59 AM, Simon Wunderlich wrote: > On Tue, Jan 15, 2013 at 01:02:43PM +0100, Sven Eckelmann wrote: >> The sample data received through the spectral scan can be either in big or >> little endian byteorder. This information isn't stored in the output file. >> Therefore it is not possible for the analyzer software to find the correct byte >> order. >> >> It is relative common to get the data from a low end AP in big endian mode and >> transfer it to another computer in little endian mode to analyze it. Therefore, >> it would be better to store it in network (big endian) byte order. > > I'd agree that changing the byteorder to the "general" network order format is > a good idea, although we will break compatibility again - which should hopefully > be no problem as the original patch is pretty new anyway. > > I was pondering about performance loss when we run spectral on the same machine > (i.e. maybe adding two useless byteswaps per value). OTOH the byteswaps are pretty > cheap and we do some computations anyway, so the performance difference should be quite > small. > > Therefore, > > Acked-by: Simon Wunderlich > > (I've CCd some more people in the reply so they can scream if they don't like it. ;]) > > Thanks, > Simon > Hi Simon, at this point, I'd like to advocate the approach I am currently using that does the conversion fully in user space. There, each sample provided consists of the fft data as bytes plus the values required to scale the magnitude values back to absolute power numbers (i.e. the 'bug-fixed' raw data). Since for the scaling an user space component is mandatory (FP calculations), I miss to see the benefit of splitting post-processing in the kernel (shifting bins) and user space. This step doubles fft data size and introduces endianess issues for no (at least to me) evident reason. Maybe you have a host application in mind where it does not really matter where the processing is done. Whereas, if you operate an AP as continuous spectral scanner, shifting the post-processing to the point where it is evaluated / displayed (usually your fat PC) significantly impacts your AP's load and its capability to provide higher sampling rates. I'd assume Adrian's proposal to just push out the raw spectral data to user-space is also targeting at that, which I fully support. The only thing I would keep in the driver is fixing the fft data corruption caused by known chip bugs. Cheers, Zefir >> >> Signed-off-by: Sven Eckelmann >> Cc: Simon Wunderlich >> --- >> A patch for FFT_eval was also sent to the author. >> >> drivers/net/wireless/ath/ath9k/recv.c | 10 +++++++--- >> 1 file changed, 7 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c >> index d7c129b..2fac787 100644 >> --- a/drivers/net/wireless/ath/ath9k/recv.c >> +++ b/drivers/net/wireless/ath/ath9k/recv.c >> @@ -1064,8 +1064,9 @@ static void ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, >> >> fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; >> fft_sample.tlv.length = sizeof(fft_sample) - sizeof(fft_sample.tlv); >> + fft_sample.tlv.length = __cpu_to_be16(fft_sample.tlv.length); >> >> - fft_sample.freq = ah->curchan->chan->center_freq; >> + fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq); >> fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0); >> fft_sample.noise = ah->noise; >> >> @@ -1106,13 +1107,16 @@ static void ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, >> mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1; >> >> /* Apply exponent and grab further auxiliary information. */ >> - for (i = 0; i < SPECTRAL_HT20_NUM_BINS; i++) >> + for (i = 0; i < SPECTRAL_HT20_NUM_BINS; i++) { >> fft_sample.data[i] = bins[i] << mag_info->max_exp; >> + fft_sample.data[i] = __cpu_to_be16(fft_sample.data[i]); >> + } >> >> fft_sample.max_magnitude = spectral_max_magnitude(mag_info->all_bins); >> + fft_sample.max_magnitude = __cpu_to_be16(fft_sample.max_magnitude); >> fft_sample.max_index = spectral_max_index(mag_info->all_bins); >> fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins); >> - fft_sample.tsf = tsf; >> + fft_sample.tsf = __cpu_to_be64(tsf); >> >> ath_debug_send_fft_sample(sc, &fft_sample.tlv); >> #endif >> -- >> 1.7.10.4 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html