Return-path: Received: from icf.org.ru ([91.193.236.10]:50871 "EHLO icf.org.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757483Ab3BSBMV (ORCPT ); Mon, 18 Feb 2013 20:12:21 -0500 Date: Tue, 19 Feb 2013 05:12:20 +0400 (MSK) From: Georgiewskiy Yuriy To: linux-wireless@vger.kernel.org, ath9k-devel@lists.ath9k.org Subject: Re: txpower setting regression In-Reply-To: Message-ID: (sfid-20130219_021227_960090_370BBD83) References: MIME-Version: 1.0 Content-Type: MULTIPART/MIXED; BOUNDARY="-1051000339-23634651-1361236340=:15277" Sender: linux-wireless-owner@vger.kernel.org List-ID: This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. ---1051000339-23634651-1361236340=:15277 Content-Type: TEXT/PLAIN; charset=KOI8-R Content-Transfer-Encoding: 8BIT On 2013-02-19 04:04 +0400, Georgiewskiy Yuriy wrote linux-wireless@vger.ker...: hm, update - on 3.8.0 all ok GY> GY>Hi all, there is some kind of regression with setting transmit power, GY>hardware is warious GY>ar9280 cards, all work as sould with compat-wireless-3.6 and GY>compat-drivers-2013-02-13, i have modified regulatory database: GY> GY>iw reg get GY>country RU: GY> (2402 - 2494 @ 40), (24, 23) GY> (5030 - 5835 @ 40), (24, 23) GY> GY>with compat-wireless-3.6 and compat-drivers-2013-02-13 i can change txpower GY>in this rules, GY>iw list show channels and it's power according to database rules: GY> GY> Frequencies: GY> * 2412 MHz [1] (23.0 dBm) GY> * 2417 MHz [2] (23.0 dBm) GY> * 2422 MHz [3] (23.0 dBm) GY> * 2427 MHz [4] (23.0 dBm) GY> * 2432 MHz [5] (23.0 dBm) GY> * 2437 MHz [6] (23.0 dBm) GY> * 2442 MHz [7] (23.0 dBm) GY> * 2447 MHz [8] (23.0 dBm) GY> * 2452 MHz [9] (23.0 dBm) GY> * 2457 MHz [10] (23.0 dBm) GY> * 2462 MHz [11] (23.0 dBm) GY> * 2467 MHz [12] (23.0 dBm) GY> * 2472 MHz [13] (23.0 dBm) GY> * 2484 MHz [14] (23.0 dBm) GY> GY>but with compat-drivers 3.7.6 and 3.8-rc7 i cannot set power level, iw phy GY>phy0 set txpower fixed 10/limit 10/iw dev dev0/etc give same error - command GY>failed: Operation not supported (-95), and iw list give strange output like GY>this: GY> GY> Frequencies: GY> * 2412 MHz [1] (20.0 dBm) GY> * 2417 MHz [2] (21.0 dBm) GY> * 2422 MHz [3] (21.0 dBm) GY> * 2427 MHz [4] (21.0 dBm) GY> * 2432 MHz [5] (21.0 dBm) GY> * 2437 MHz [6] (21.0 dBm) GY> * 2442 MHz [7] (21.0 dBm) GY> * 2447 MHz [8] (21.0 dBm) GY> * 2452 MHz [9] (21.0 dBm) GY> * 2457 MHz [10] (21.0 dBm) GY> * 2462 MHz [11] (20.0 dBm) GY> * 2467 MHz [12] (23.0 dBm) GY> * 2472 MHz [13] (23.0 dBm) GY> * 2484 MHz [14] (23.0 dBm) GY> GY>and channel levels different on different cards. GY> GY> GY>C ????????? With Best Regards GY>???????????? ????. Georgiewskiy Yuriy GY>+7 4872 711666 +7 4872 711666 GY>???? +7 4872 711143 fax +7 4872 711143 GY>???????? ??? "?? ?? ??????" IT Service Ltd GY>http://nkoort.ru http://nkoort.ru GY>JID: GHhost@icf.org.ru JID: GHhost@icf.org.ru GY>YG129-RIPE YG129-RIPE C ????????? With Best Regards ???????????? ????. Georgiewskiy Yuriy +7 4872 711666 +7 4872 711666 ???? +7 4872 711143 fax +7 4872 711143 ???????? ??? "?? ?? ??????" IT Service Ltd http://nkoort.ru http://nkoort.ru JID: GHhost@icf.org.ru JID: GHhost@icf.org.ru YG129-RIPE YG129-RIPE ---1051000339-23634651-1361236340=:15277--