Return-path: Received: from mx3.wp.pl ([212.77.101.7]:41890 "EHLO mx3.wp.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932544Ab3CPSUH (ORCPT ); Sat, 16 Mar 2013 14:20:07 -0400 From: stf_xl@wp.pl To: "John W. Linville\"" Cc: linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com, Stanislaw Gruszka Subject: [PATCH 18/25] rt2800: rearrange bbp/rfcsr initialization Date: Sat, 16 Mar 2013 19:19:46 +0100 Message-Id: <1363457993-15541-19-git-send-email-stf_xl@wp.pl> (sfid-20130316_192040_737455_E2626C90) In-Reply-To: <1363457993-15541-1-git-send-email-stf_xl@wp.pl> References: <1363457993-15541-1-git-send-email-stf_xl@wp.pl> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Stanislaw Gruszka This makes order of initialization of various registers similar like on vendor driver. Based on: NICInitializeAsic() RT5592LoadRFNormalModeSetup() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chip/rt5592.c Signed-off-by: Stanislaw Gruszka --- drivers/net/wireless/rt2x00/rt2800lib.c | 50 +++++++++++++++++++++++++++--- 1 files changed, 45 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index e96ea32..e36cf4a 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4713,6 +4713,9 @@ static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev) static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev) { + u8 reg; + u16 eeprom; + rt2800_rfcsr_write(rt2x00dev, 1, 0x3F); rt2800_rfcsr_write(rt2x00dev, 3, 0x08); rt2800_rfcsr_write(rt2x00dev, 3, 0x08); @@ -4740,6 +4743,35 @@ static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev) msleep(1); rt2800_adjust_freq_offset(rt2x00dev); + + rt2800_bbp_read(rt2x00dev, 138, ®); + + /* Turn off unused DAC1 and ADC1 to reduce power consumption */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1) + rt2x00_set_field8(®, BBP138_RX_ADC1, 0); + if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1) + rt2x00_set_field8(®, BBP138_TX_DAC1, 1); + + rt2800_bbp_write(rt2x00dev, 138, reg); + + /* Enable DC filter */ + if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) + rt2800_bbp_write(rt2x00dev, 103, 0xc0); + + rt2800_rfcsr_read(rt2x00dev, 38, ®); + rt2x00_set_field8(®, RFCSR38_RX_LO1_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 38, reg); + + rt2800_rfcsr_read(rt2x00dev, 39, ®); + rt2x00_set_field8(®, RFCSR39_RX_LO2_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 39, reg); + + rt2800_bbp4_mac_if_ctrl(rt2x00dev); + + rt2800_rfcsr_read(rt2x00dev, 30, ®); + rt2x00_set_field8(®, RFCSR30_RX_VCM, 2); + rt2800_rfcsr_write(rt2x00dev, 30, reg); } static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) @@ -4817,7 +4849,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) break; case RT5592: rt2800_init_rfcsr_5592(rt2x00dev); - break; + return 0; } if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { @@ -5024,15 +5056,23 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev) * Initialize all registers. */ if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || - rt2800_init_registers(rt2x00dev) || - rt2800_init_bbp(rt2x00dev) || - rt2800_init_rfcsr(rt2x00dev))) + rt2800_init_registers(rt2x00dev))) return -EIO; /* * Send signal to firmware during boot time. */ - rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); + rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); + rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); + if (rt2x00_is_usb(rt2x00dev)) { + rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0); + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); + } + msleep(1); + + if (unlikely(rt2800_init_bbp(rt2x00dev) || + rt2800_init_rfcsr(rt2x00dev))) + return -EIO; if (rt2x00_is_usb(rt2x00dev) && (rt2x00_rt(rt2x00dev, RT3070) || -- 1.7.4.4