Return-path: Received: from cdptpa-omtalb.mail.rr.com ([75.180.132.120]:51884 "EHLO cdptpa-omtalb.mail.rr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932334Ab3CUWkl (ORCPT ); Thu, 21 Mar 2013 18:40:41 -0400 From: Solomon Peachy To: linux-wireless@vger.kernel.org Cc: Solomon Peachy Subject: [PATCH 13/15] cw1200: v5: Module defining platform data for Sagrad SG901-1091/1098 modules Date: Thu, 21 Mar 2013 18:39:47 -0400 Message-Id: <1363905589-8350-14-git-send-email-pizza@shaftnet.org> (sfid-20130321_234304_172046_39894977) In-Reply-To: <1363905589-8350-1-git-send-email-pizza@shaftnet.org> References: <1363905589-8350-1-git-send-email-pizza@shaftnet.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: Signed-off-by: Solomon Peachy --- drivers/net/wireless/cw1200/cw1200_sagrad.c | 145 ++++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 drivers/net/wireless/cw1200/cw1200_sagrad.c diff --git a/drivers/net/wireless/cw1200/cw1200_sagrad.c b/drivers/net/wireless/cw1200/cw1200_sagrad.c new file mode 100644 index 0000000..a5ada0e --- /dev/null +++ b/drivers/net/wireless/cw1200/cw1200_sagrad.c @@ -0,0 +1,145 @@ +/* + * Platform glue data for ST-Ericsson CW1200 driver + * + * Copyright (c) 2013, Sagrad, Inc + * Author: Solomon Peachy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +MODULE_AUTHOR("Solomon Peachy "); +MODULE_DESCRIPTION("ST-Ericsson CW1200 Platform glue driver"); +MODULE_LICENSE("GPL"); + +/* Define just one of these. Feel free to customize as needed */ +#define SAGRAD_1091_1098_EVK_SDIO +/* #define SAGRAD_1091_1098_EVK_SPI */ + +#ifdef SAGRAD_1091_1098_EVK_SDIO +#if 0 +static struct resource cw1200_href_resources[] = { + { + .start = 215, /* fix me as appropriate */ + .end = 215, /* ditto */ + .flags = IORESOURCE_IO, + .name = "cw1200_wlan_reset", + }, + { + .start = 216, /* fix me as appropriate */ + .end = 216, /* ditto */ + .flags = IORESOURCE_IO, + .name = "cw1200_wlan_powerup", + }, + { + .start = NOMADIK_GPIO_TO_IRQ(216), /* fix me as appropriate */ + .end = NOMADIK_GPIO_TO_IRQ(216), /* ditto */ + .flags = IORESOURCE_IRQ, + .name = "cw1200_wlan_irq", + }, +}; +#endif + +static int cw1200_power_ctrl(const struct cw1200_platform_data_sdio *pdata, + bool enable) +{ + /* Control 3v3 and 1v8 to hardware as appropriate */ + /* Note this is not needed if it's controlled elsewhere or always on */ + + /* May require delay for power to stabilize */ + return 0; +} + +static int cw1200_clk_ctrl(const struct cw1200_platform_data_sdio *pdata, + bool enable) +{ + /* Turn CLK_32K off and on as appropriate. */ + /* Note this is not needed if it's always on */ + + /* May require delay for clock to stabilize */ + return 0; +} + +static struct cw1200_platform_data_sdio cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, +#if 0 + .reset = &cw1200_href_resources[0], + .powerup = &cw1200_href_resources[1], + .irq = &cw1200_href_resources[2], +#endif + .power_ctrl = cw1200_power_ctrl, + .clk_ctrl = cw1200_clk_ctrl, +/* .macaddr = ??? */ + .sdd_file = "sdd_sagrad_1091_1098.bin", +}; +#endif + +#ifdef SAGRAD_1091_1098_EVK_SPI +/* Note that this is an example of integrating into your board support file */ +static struct resource cw1200_href_resources[] = { + { + .start = GPIO_RF_RESET, + .end = GPIO_RF_RESET, + .flags = IORESOURCE_IO, + .name = "cw1200_wlan_reset", + }, + { + .start = GPIO_RF_POWERUP, + .end = GPIO_RF_POWERUP, + .flags = IORESOURCE_IO, + .name = "cw1200_wlan_powerup", + }, +}; + +static int cw1200_power_ctrl(const struct cw1200_platform_data_spi *pdata, + bool enable) +{ + /* Control 3v3 and 1v8 to hardware as appropriate */ + /* Note this is not needed if it's controlled elsewhere or always on */ + + /* May require delay for power to stabilize */ + return 0; +} +static int cw1200_clk_ctrl(const struct cw1200_platform_data_spi *pdata, + bool enable) +{ + /* Turn CLK_32K off and on as appropriate. */ + /* Note this is not needed if it's always on */ + + /* May require delay for clock to stabilize */ + return 0; +} + +static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = &cw1200_href_resources[0], + .powerup = &cw1200_href_resources[1], + .power_ctrl = cw1200_power_ctrl, + .clk_ctrl = cw1200_clk_ctrl, +/* .macaddr = ??? */ + .sdd_file = "sdd_sagrad_1091_1098.bin", +}; +static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 10000000, /* 52MHz Max */ + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, +}; +#endif + + +const void *cw1200_get_platform_data(void) +{ + return &cw1200_platform_data; +} +EXPORT_SYMBOL_GPL(cw1200_get_platform_data); -- 1.8.1.4