Return-path: Received: from mail-ie0-f176.google.com ([209.85.223.176]:34812 "EHLO mail-ie0-f176.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756188Ab3DXRmQ (ORCPT ); Wed, 24 Apr 2013 13:42:16 -0400 Received: by mail-ie0-f176.google.com with SMTP id x14so2444571ief.35 for ; Wed, 24 Apr 2013 10:42:16 -0700 (PDT) Message-ID: <51781976.3000601@lwfinger.net> (sfid-20130424_194220_004700_E191DE3F) Date: Wed, 24 Apr 2013 12:42:14 -0500 From: Larry Finger MIME-Version: 1.0 To: Michael Stahn CC: linux-wireless Subject: Re: Fwd: Realtek 8192CU not working References: <5177F100.1070803@lwfinger.net> <51780C92.4000208@lwfinger.net> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 04/24/2013 12:27 PM, Michael Stahn wrote: > okay now it gets a little awkward: un/reloading the driver seems to > fix the authentication-problem (ip gets assigned), but no ping > succeeds.. > http://bpaste.net/show/93913/ > > 2013/4/24 Michael Stahn : >> I'm using a i686 Architecture on AMD E2-1800 APU with Radeon(tm) HD >> Graphics AuthenticAMD GNU/Linux with linux 3.7.10. CONFIG_USB_DEBUG >> was allready set. I've used an USB 3.0 port previously and now >> rechecked everything with a USB2.0 port. The result is nearly the >> same: first connection succeeds (ping response), doing a manual >> reconnect to the AP leads to the same error. I've done several >> ifconfig down/ups at the end with no change. >> dmesg gives: http://bpaste.net/show/93912/ To be able to work on the error messages from ehci-hcd, it is likely that we will need all the messages associated with the initialization of the hub. That is the reason that I asked that you post the entire dmesg output, starting at time 0. What encryption are you using? Larry