Return-path: Received: from szxga02-in.huawei.com ([119.145.14.65]:23530 "EHLO szxga02-in.huawei.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752834Ab3FDHI4 (ORCPT ); Tue, 4 Jun 2013 03:08:56 -0400 From: Yijing Wang To: "David S. Miller" CC: , , Yijing Wang , Stanislav Yakovlev , "John W. Linville" , Subject: [RESEND][PATCH 3/7] net, ipw2x00: remove redundant D0 power state set Date: Tue, 4 Jun 2013 15:07:54 +0800 Message-ID: <1370329674-8360-1-git-send-email-wangyijing@huawei.com> (sfid-20130604_090901_493269_3FEBBBF0) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: Pci_enable_device() will set device power state to D0, so it's no need to do it again in ipw2100_pci_init_one(). Signed-off-by: Yijing Wang Cc: Stanislav Yakovlev Cc: "John W. Linville" Cc: netdev@vger.kernel.org Cc: linux-wireless@vger.kernel.org --- drivers/net/wireless/ipw2x00/ipw2100.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 15920aa..f8ab193 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6242,8 +6242,6 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, if ((val & 0x0000ff00) != 0) pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff); - pci_set_power_state(pci_dev, PCI_D0); - if (!ipw2100_hw_is_adapter_in_system(dev)) { printk(KERN_WARNING DRV_NAME "Device not found via register read.\n"); -- 1.7.1