Return-path: Received: from nick.hrz.tu-chemnitz.de ([134.109.228.11]:45103 "EHLO nick.hrz.tu-chemnitz.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752687Ab3F0Moc (ORCPT ); Thu, 27 Jun 2013 08:44:32 -0400 From: Simon Wunderlich To: Johannes Berg Cc: linux-wireless@vger.kernel.org, Mathias Kretschmer , Simon Wunderlich Subject: [PATCHv4 00/18] Add support for 5 and 10 MHz channels Date: Thu, 27 Jun 2013 14:44:06 +0200 Message-Id: <1372337064-19254-1-git-send-email-siwu@hrz.tu-chemnitz.de> (sfid-20130627_144444_153497_BDE1150F) Sender: linux-wireless-owner@vger.kernel.org List-ID: This patchset adds support for 5 and 10 MHz in nl80211/cfg80211/mac80211 and enables support in ath5k and ath9k, which already support this feature on the driver side. 5 and 10 MHz wide channels might be useful for: * long shot links, as the transmissions are more robust * future support for 802.11y which allows some 5 and 10 MHz channels in 3.6 GHz range * future support for 802.11p which uses 10 MHz in 5.9 GHz range * ... and more "special" applications. This patchset enables 5 and 10 MHz channels only for OFDM, and without HT/MIMO/aggregation (for now). Support may be added later. Changes to PATCHv3: * some patches dropped which were already merged by Johannes * add new patches: * nl80211: add scan width to bss and scan request * mac80211/rc80211: add chandef to rate initialization * cfg80211/mac80211: get mandatory rates based on rate flags * mac80211: allow scanning for 5/10 MHz channels in IBSS * mac80211: return if IBSS chandef can not be used * add scan/bss handling support for 5/10 MHz (see new patches above) * add chandef parameter to rate control API (see new patches above) * never access hw.conf to acquire the current channel width/chandef -> this should (in theory?) make this usable in chanctx drivers as well * fix txpower according to Felix' suggestion * various smaller fixes As always, any comments are appreciated! Cheers, Simon Simon Wunderlich (18): nl80211: add scan width to bss and scan request mac80211/rc80211: add chandef to rate initialization mac80211: fix timing for 5 MHz and 10 MHz channels mac80211: select and adjust bitrates according to channel mode cfg80211/mac80211: get mandatory rates based on rate flags cfg80211/mac80211: use reduced txpower for 5 and 10 MHz mac80211: add radiotap flag and handling for 5/10 MHz mac80211: allow scanning for 5/10 MHz channels in IBSS mac80211: return if IBSS chandef can not be used nl80211: allow 5 and 10 MHz channels for IBSS ath9k: always use SIFS times from OFDM for 5/10 MHz ath9k: use chandef instead of channel_type ath9k: report 5/10 MHz channels ath9k: set 5/10 MHz supported channels and fix bitrate ath9k: announce that ath9k supports 5/10 MHz ath5k: report 5/10 MHz channels ath5k: set 5/10 MHz supported channels and fix duration ath5k: enable support for 5 MHz and 10 MHz channels drivers/net/wireless/ath/ath5k/ath5k.h | 1 + drivers/net/wireless/ath/ath5k/base.c | 59 ++++++-- drivers/net/wireless/ath/ath5k/base.h | 2 +- drivers/net/wireless/ath/ath5k/mac80211-ops.c | 2 +- drivers/net/wireless/ath/ath5k/pcu.c | 2 + drivers/net/wireless/ath/ath5k/qcu.c | 25 +++- drivers/net/wireless/ath/ath9k/common.c | 67 +++++---- drivers/net/wireless/ath/ath9k/common.h | 3 +- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 5 +- drivers/net/wireless/ath/ath9k/hw.c | 5 +- drivers/net/wireless/ath/ath9k/init.c | 29 ++-- drivers/net/wireless/ath/ath9k/main.c | 8 +- drivers/net/wireless/ath/ath9k/rc.c | 12 +- drivers/net/wireless/ath/ath9k/recv.c | 11 ++ drivers/net/wireless/iwlegacy/3945-rs.c | 1 + drivers/net/wireless/iwlegacy/4965-rs.c | 1 + drivers/net/wireless/iwlwifi/dvm/rs.c | 3 +- drivers/net/wireless/iwlwifi/mvm/rs.c | 5 +- drivers/net/wireless/rtlwifi/rc.c | 1 + include/net/cfg80211.h | 85 ++++++++++- include/net/ieee80211_radiotap.h | 4 + include/net/mac80211.h | 6 + include/uapi/linux/nl80211.h | 18 +++ net/mac80211/cfg.c | 47 +++--- net/mac80211/ibss.c | 126 ++++++++++++---- net/mac80211/ieee80211_i.h | 43 +++++- net/mac80211/iface.c | 2 +- net/mac80211/main.c | 12 +- net/mac80211/mesh.c | 2 +- net/mac80211/mesh_plink.c | 2 +- net/mac80211/mlme.c | 96 +++++++------ net/mac80211/rate.c | 50 ++++--- net/mac80211/rate.h | 22 ++- net/mac80211/rc80211_minstrel.c | 33 ++++- net/mac80211/rc80211_minstrel_ht.c | 15 +- net/mac80211/rc80211_pid_algo.c | 1 + net/mac80211/rx.c | 28 ++-- net/mac80211/scan.c | 72 ++++++++-- net/mac80211/status.c | 17 ++- net/mac80211/tx.c | 24 +++- net/mac80211/util.c | 190 ++++++++++++++++++++----- net/wireless/mesh.c | 5 +- net/wireless/nl80211.c | 3 + net/wireless/scan.c | 31 ++-- net/wireless/trace.h | 12 +- net/wireless/util.c | 14 +- 46 files changed, 887 insertions(+), 315 deletions(-) -- 1.7.10.4