Return-path: Received: from mxout1.netvision.net.il ([194.90.9.20]:57504 "EHLO mxout1.netvision.net.il" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757538Ab3FFJgL (ORCPT ); Thu, 6 Jun 2013 05:36:11 -0400 Received: from localhost.localdomain ([82.166.196.250]) by mxout1.netvision.net.il (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTPA id <0MNY00C1JTC5MC50@mxout1.netvision.net.il> for linux-wireless@vger.kernel.org; Thu, 06 Jun 2013 12:36:08 +0300 (IDT) From: Kirshenbaum Erez To: qca_vkondrat@qca.qualcomm.com Cc: linux-wireless@vger.kernel.org, Kirshenbaum Erez Subject: [PATCH] wil6210: Fix AP/PCP start flow Date: Thu, 06 Jun 2013 11:35:40 +0300 Message-id: <1370507740-9178-1-git-send-email-erezk@wilocity.com> (sfid-20130606_113614_384150_94E683DA) Sender: linux-wireless-owner@vger.kernel.org List-ID: Signed-off-by: Kirshenbaum Erez --- drivers/net/wireless/ath/wil6210/main.c | 35 --------------------------------- 1 file changed, 35 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index c97b864..271ee22 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -286,41 +286,31 @@ static int __wil_up(struct wil6210_priv *wil) { struct net_device *ndev = wil_to_ndev(wil); struct wireless_dev *wdev = wil->wdev; - struct ieee80211_channel *channel = wdev->preset_chandef.chan; int rc; - int bi; - u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype); rc = wil_reset(wil); if (rc) return rc; - /* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */ - wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC); switch (wdev->iftype) { case NL80211_IFTYPE_STATION: wil_dbg_misc(wil, "type: STATION\n"); - bi = 0; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_AP: wil_dbg_misc(wil, "type: AP\n"); - bi = 100; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_P2P_CLIENT: wil_dbg_misc(wil, "type: P2P_CLIENT\n"); - bi = 0; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_P2P_GO: wil_dbg_misc(wil, "type: P2P_GO\n"); - bi = 100; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_MONITOR: wil_dbg_misc(wil, "type: Monitor\n"); - bi = 0; ndev->type = ARPHRD_IEEE80211_RADIOTAP; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */ break; @@ -328,34 +318,9 @@ static int __wil_up(struct wil6210_priv *wil) return -EOPNOTSUPP; } - /* Apply profile in the following order: */ - /* SSID and channel for the AP */ - switch (wdev->iftype) { - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_P2P_GO: - if (wdev->ssid_len == 0) { - wil_err(wil, "SSID not set\n"); - return -EINVAL; - } - rc = wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid); - if (rc) - return rc; - break; - default: - break; - } - /* MAC address - pre-requisite for other commands */ wmi_set_mac_address(wil, ndev->dev_addr); - /* Set up beaconing if required. */ - if (bi > 0) { - rc = wmi_pcp_start(wil, bi, wmi_nettype, - (channel ? channel->hw_value : 0)); - if (rc) - return rc; - } - /* Rx VRING. After MAC and beacon */ wil_rx_init(wil); -- 1.7.11.7