Return-path: Received: from devils.ext.ti.com ([198.47.26.153]:59845 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932934Ab3GCOEm (ORCPT ); Wed, 3 Jul 2013 10:04:42 -0400 From: Luciano Coelho To: , , CC: , , , , , , , , , , , Subject: [PATCH v3 7/8] wlcore: sdio: get clocks from device tree Date: Wed, 3 Jul 2013 17:03:28 +0300 Message-ID: <1372860209-3504-8-git-send-email-coelho@ti.com> (sfid-20130703_160540_332042_3F8FD41D) In-Reply-To: <1372860209-3504-1-git-send-email-coelho@ti.com> References: <1372860209-3504-1-git-send-email-coelho@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: Read the clock nodes from the device tree and use them to set the frequency for the refclock and the tcxo clock. Also, call sdio_set_drvdata() earlier, so the glue is already set in the driver data when we call wlcore_get_pdata_from_of() and we don't need to pass it as a parameter. Signed-off-by: Luciano Coelho Reviewed-by: Felipe Balbi --- drivers/net/wireless/ti/wlcore/sdio.c | 36 +++++++++++++++++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 980bf3d..60fce49 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -53,6 +53,7 @@ static bool dump = false; struct wl12xx_sdio_glue { struct device *dev; struct platform_device *core; + struct clk *refclock, *tcxoclock; }; static const struct sdio_device_id wl1271_devices[] = { @@ -224,6 +225,7 @@ static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev) struct wl12xx_platform_data *pdata; struct device_node *np = dev->of_node; struct device_node *clock_node; + struct wl12xx_sdio_glue *glue = sdio_get_drvdata(dev_to_sdio_func(dev)); if (!np) { np = of_find_matching_node(NULL, dev->driver->of_match_table); @@ -250,6 +252,26 @@ static struct wl12xx_platform_data *wlcore_get_pdata_from_of(struct device *dev) for_each_matching_node(clock_node, wlcore_sdio_of_clk_match_table) of_fixed_clk_setup(clock_node); + /* TODO: make sure we have this when needed (ie. for WL6 and WL7) */ + glue->refclock = of_clk_get_by_name(np, "refclock"); + if (IS_ERR(glue->refclock)) { + dev_err(dev, "couldn't find refclock on the device tree\n"); + glue->refclock = NULL; + } else { + clk_prepare_enable(glue->refclock); + pdata->ref_clock_freq = clk_get_rate(glue->refclock); + } + + /* TODO: make sure we have this when needed (ie. for WL7) */ + glue->tcxoclock = of_clk_get_by_name(np, "tcxoclock"); + if (IS_ERR(glue->tcxoclock)) { + dev_err(dev, "couldn't find tcxoclock on the device tree\n"); + glue->tcxoclock = NULL; + } else { + clk_prepare_enable(glue->tcxoclock); + pdata->ref_clock_freq = clk_get_rate(glue->tcxoclock); + } + goto out; out_free: @@ -294,6 +316,8 @@ static int wl1271_probe(struct sdio_func *func, /* Use block mode for transferring over one block size of data */ func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; + sdio_set_drvdata(func, glue); + /* The pdata allocated here is freed when the device is freed, * so we don't need an additional out label to free it in case * of error further on. @@ -319,8 +343,6 @@ static int wl1271_probe(struct sdio_func *func, if (mmcflags & MMC_PM_KEEP_POWER) pdev_data->pwr_in_suspend = true; - sdio_set_drvdata(func, glue); - /* Tell PM core that we don't need the card to be powered now */ pm_runtime_put_noidle(&func->dev); @@ -387,6 +409,16 @@ static void wl1271_remove(struct sdio_func *func) { struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); + if (glue->refclock) { + clk_disable_unprepare(glue->refclock); + clk_put(glue->refclock); + } + + if (glue->tcxoclock) { + clk_disable_unprepare(glue->tcxoclock); + clk_put(glue->tcxoclock); + } + /* Undo decrement done above in wl1271_probe */ pm_runtime_get_noresume(&func->dev); -- 1.7.10.4