Return-path: Received: from cora.hrz.tu-chemnitz.de ([134.109.228.40]:43901 "EHLO cora.hrz.tu-chemnitz.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754156Ab3HBPiT (ORCPT ); Fri, 2 Aug 2013 11:38:19 -0400 From: Simon Wunderlich To: linux-wireless@vger.kernel.org Cc: Johannes Berg , Mathias Kretschmer , Simon Wunderlich Subject: [PATCH 3/7] mac80211: split off channel switch parsing function Date: Fri, 2 Aug 2013 17:38:02 +0200 Message-Id: <1375457886-7275-4-git-send-email-siwu@hrz.tu-chemnitz.de> (sfid-20130802_173839_900471_6B71A9CF) In-Reply-To: <1375457886-7275-1-git-send-email-siwu@hrz.tu-chemnitz.de> References: <1375457886-7275-1-git-send-email-siwu@hrz.tu-chemnitz.de> Sender: linux-wireless-owner@vger.kernel.org List-ID: The channel switch parsing function can be re-used for the IBSS code, put the common part into an extra function. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer --- net/mac80211/ieee80211_i.h | 22 +++++++ net/mac80211/mlme.c | 136 ++++++++++++++++++++++++-------------------- 2 files changed, 97 insertions(+), 61 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index e94c840..1275bde 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1333,6 +1333,9 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata); void ieee80211_ibss_work(struct ieee80211_sub_if_data *sdata); void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb); +int ieee80211_ibss_csa_beacon(struct ieee80211_sub_if_data *sdata, + struct cfg80211_csa_settings *csa_settings); +int ieee80211_ibss_finish_csa(struct ieee80211_sub_if_data *sdata); /* mesh code */ void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata); @@ -1560,6 +1563,25 @@ static inline void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, struct ieee802_11_elems *elems, u64 filter, u32 crc); + +/** + * ieee80211_parse_ch_switch_ie - parses channel switch IEs + * @sdata: the sdata of the interface which has received the frame + * @elems: parsed 802.11 elements received with the frame + * @beacon: indicates if the frame was a beacon or probe response + * @current_band: indicates the current band + * @sta_flags: contains information about own capabilities and restrictions + * @count: to be filled with the counter until the switch (on success only) + * @mode: to be filled with CSA mode (on success only) + * @new_chandef: to be filled with destination chandef (on success only) + * Return: 0 on success, <0 on error and >0 if there is nothing to parse. + */ +int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata, + struct ieee802_11_elems *elems, bool beacon, + enum ieee80211_band current_band, + u32 sta_flags, u8 *count, u8 *mode, + struct cfg80211_chan_def *new_chandef); + static inline void ieee802_11_parse_elems(const u8 *start, size_t len, bool action, struct ieee802_11_elems *elems) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 45a87ee..60554c8 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -981,54 +981,35 @@ static void ieee80211_chswitch_timer(unsigned long data) ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work); } -static void -ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - u64 timestamp, struct ieee802_11_elems *elems, - bool beacon) +int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata, + struct ieee802_11_elems *elems, bool beacon, + enum ieee80211_band current_band, + u32 sta_flags, u8 *count, u8 *mode, + struct cfg80211_chan_def *new_chandef) { - struct ieee80211_local *local = sdata->local; - struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - struct cfg80211_bss *cbss = ifmgd->associated; - struct ieee80211_bss *bss; - struct ieee80211_chanctx *chanctx; enum ieee80211_band new_band; int new_freq; u8 new_chan_no; - u8 count; - u8 mode; struct ieee80211_channel *new_chan; - struct cfg80211_chan_def new_chandef = {}; struct cfg80211_chan_def new_vht_chandef = {}; const struct ieee80211_sec_chan_offs_ie *sec_chan_offs; const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie; const struct ieee80211_ht_operation *ht_oper; int secondary_channel_offset = -1; - sdata_assert_lock(sdata); - - if (!cbss) - return; - - if (local->scanning) - return; - - /* disregard subsequent announcements if we are already processing */ - if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED) - return; - sec_chan_offs = elems->sec_chan_offs; wide_bw_chansw_ie = elems->wide_bw_chansw_ie; ht_oper = elems->ht_operation; - if (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | - IEEE80211_STA_DISABLE_40MHZ)) { + if (sta_flags & (IEEE80211_STA_DISABLE_HT | + IEEE80211_STA_DISABLE_40MHZ)) { sec_chan_offs = NULL; wide_bw_chansw_ie = NULL; /* only used for bandwidth here */ ht_oper = NULL; } - if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) + if (sta_flags & IEEE80211_STA_DISABLE_VHT) wide_bw_chansw_ie = NULL; if (elems->ext_chansw_ie) { @@ -1038,33 +1019,28 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, sdata_info(sdata, "cannot understand ECSA IE operating class %d, disconnecting\n", elems->ext_chansw_ie->new_operating_class); - ieee80211_queue_work(&local->hw, - &ifmgd->csa_connection_drop_work); + return -EINVAL; } new_chan_no = elems->ext_chansw_ie->new_ch_num; - count = elems->ext_chansw_ie->count; - mode = elems->ext_chansw_ie->mode; + *count = elems->ext_chansw_ie->count; + *mode = elems->ext_chansw_ie->mode; } else if (elems->ch_switch_ie) { - new_band = cbss->channel->band; + new_band = current_band; new_chan_no = elems->ch_switch_ie->new_ch_num; - count = elems->ch_switch_ie->count; - mode = elems->ch_switch_ie->mode; + *count = elems->ch_switch_ie->count; + *mode = elems->ch_switch_ie->mode; } else { /* nothing here we understand */ - return; + return 1; } - bss = (void *)cbss->priv; - new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band); new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) { sdata_info(sdata, - "AP %pM switches to unsupported channel (%d MHz), disconnecting\n", - ifmgd->associated->bssid, new_freq); - ieee80211_queue_work(&local->hw, - &ifmgd->csa_connection_drop_work); - return; + "network switches to unsupported channel (%d MHz), disconnecting\n", + new_freq); + return -EINVAL; } if (!beacon && sec_chan_offs) { @@ -1072,7 +1048,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, } else if (beacon && ht_oper) { secondary_channel_offset = ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET; - } else if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { + } else if (!(sta_flags & IEEE80211_STA_DISABLE_HT)) { /* * If it's not a beacon, HT is enabled and the IE not present, * it's 20 MHz, 802.11-2012 8.5.2.6: @@ -1088,25 +1064,25 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, default: /* secondary_channel_offset was present but is invalid */ case IEEE80211_HT_PARAM_CHA_SEC_NONE: - cfg80211_chandef_create(&new_chandef, new_chan, + cfg80211_chandef_create(new_chandef, new_chan, NL80211_CHAN_HT20); break; case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - cfg80211_chandef_create(&new_chandef, new_chan, + cfg80211_chandef_create(new_chandef, new_chan, NL80211_CHAN_HT40PLUS); break; case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - cfg80211_chandef_create(&new_chandef, new_chan, + cfg80211_chandef_create(new_chandef, new_chan, NL80211_CHAN_HT40MINUS); break; case -1: - cfg80211_chandef_create(&new_chandef, new_chan, + cfg80211_chandef_create(new_chandef, new_chan, NL80211_CHAN_NO_HT); /* keep width for 5/10 MHz channels */ switch (sdata->vif.bss_conf.chandef.width) { case NL80211_CHAN_WIDTH_5: case NL80211_CHAN_WIDTH_10: - new_chandef.width = sdata->vif.bss_conf.chandef.width; + new_chandef->width = sdata->vif.bss_conf.chandef.width; break; default: break; @@ -1142,13 +1118,13 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, new_vht_chandef.width = NL80211_CHAN_WIDTH_80P80; break; } - if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && + if (sta_flags & IEEE80211_STA_DISABLE_80P80MHZ && new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80) chandef_downgrade(&new_vht_chandef); - if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && + if (sta_flags & IEEE80211_STA_DISABLE_160MHZ && new_vht_chandef.width == NL80211_CHAN_WIDTH_160) chandef_downgrade(&new_vht_chandef); - if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && + if (sta_flags & IEEE80211_STA_DISABLE_40MHZ && new_vht_chandef.width > NL80211_CHAN_WIDTH_20) chandef_downgrade(&new_vht_chandef); } @@ -1156,23 +1132,61 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, /* if VHT data is there validate & use it */ if (new_vht_chandef.chan) { if (!cfg80211_chandef_compatible(&new_vht_chandef, - &new_chandef)) { + new_chandef)) { sdata_info(sdata, - "AP %pM CSA has inconsistent channel data, disconnecting\n", - ifmgd->associated->bssid); - ieee80211_queue_work(&local->hw, - &ifmgd->csa_connection_drop_work); - return; + "network CSA has inconsistent channel data, disconnecting\n"); + return -EINVAL; } - new_chandef = new_vht_chandef; + *new_chandef = new_vht_chandef; } + return 0; +} + +static void +ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, + u64 timestamp, struct ieee802_11_elems *elems, + bool beacon) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct cfg80211_bss *cbss = ifmgd->associated; + struct ieee80211_chanctx *chanctx; + enum ieee80211_band current_band; + u8 count; + u8 mode; + struct cfg80211_chan_def new_chandef = {}; + int res; + + sdata_assert_lock(sdata); + + if (!cbss) + return; + + if (local->scanning) + return; + + /* disregard subsequent announcements if we are already processing */ + if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED) + return; + + current_band = cbss->channel->band; + res = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, current_band, + ifmgd->flags, &count, &mode, + &new_chandef); + if (res < 0) + ieee80211_queue_work(&local->hw, + &ifmgd->csa_connection_drop_work); + if (res) + return; + if (!cfg80211_chandef_usable(local->hw.wiphy, &new_chandef, IEEE80211_CHAN_DISABLED)) { sdata_info(sdata, - "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", - ifmgd->associated->bssid, new_freq, - new_chandef.width, new_chandef.center_freq1, + "network switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", + new_chandef.chan->center_freq, + new_chandef.width, + new_chandef.center_freq1, new_chandef.center_freq2); ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); -- 1.7.10.4