Return-path: Received: from arrakis.dune.hu ([78.24.191.176]:55350 "EHLO arrakis.dune.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755413Ab3HPWeF (ORCPT ); Fri, 16 Aug 2013 18:34:05 -0400 From: Gabor Juhos To: "John W. Linville" Cc: linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com, Gabor Juhos Subject: [PATCH 5/5] rt2x00: rt2800lib: adjust frequency offset for RF3053 Date: Fri, 16 Aug 2013 22:38:18 +0200 Message-Id: <1376685498-5167-6-git-send-email-juhosg@openwrt.org> (sfid-20130817_003418_183531_1CD8E581) In-Reply-To: <1376685498-5167-1-git-send-email-juhosg@openwrt.org> References: <1376685498-5167-1-git-send-email-juhosg@openwrt.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: Along with other chipsets, the Ralink driver uses the frequency adjustment code for RF3053 as well. Remove the bogus place-holder comment from the RF3053 specific channel configuration function and call the frequency adjustment function instead Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RT3593_ChipSwitchChannel function in chips/rt3593.c Signed-off-by: Gabor Juhos --- drivers/net/wireless/rt2x00/rt2800lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 9b4d836..fb71ed6 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2344,7 +2344,7 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev, } rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); - /* TODO: frequency calibration? */ + rt2800_adjust_freq_offset(rt2x00dev); if (conf_is_ht40(conf)) { txrx_agc_fc = rt2x00_get_field8(drv_data->calibration_bw40, -- 1.7.10