Return-path: Received: from arrakis.dune.hu ([78.24.191.176]:48762 "EHLO arrakis.dune.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752643Ab3JQHmt (ORCPT ); Thu, 17 Oct 2013 03:42:49 -0400 From: Gabor Juhos To: "John W. Linville" Cc: linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com, Gabor Juhos Subject: [PATCH 13/21] rt2x00: rt2800pci: use separate read_eeprom callback for SoC devices Date: Thu, 17 Oct 2013 09:42:27 +0200 Message-Id: <1381995755-16471-14-git-send-email-juhosg@openwrt.org> (sfid-20131017_100807_299972_BBF07CED) In-Reply-To: <1381995755-16471-1-git-send-email-juhosg@openwrt.org> References: <1381995755-16471-1-git-send-email-juhosg@openwrt.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: Rename the 'rt2800pci_read_eeprom_soc function' to 'rt2800soc_read_eeprom' and use that directly in the SoC specific 'rt2800_ops' structure. Also move the 'rt2800pci_eeprom_read' function into an 'ifdef PCI' section and remove the 'rt2800pci_read_eeprom_soc' call from that. Additionally, remove the dummy inline eeprom functions. Those are not used anymore. Signed-off-by: Gabor Juhos --- drivers/net/wireless/rt2x00/rt2800pci.c | 56 +++++++++---------------------- 1 file changed, 16 insertions(+), 40 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 344a73d..afd422f 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -91,26 +91,6 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); } -#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) -static int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) -{ - void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE); - - if (!base_addr) - return -ENOMEM; - - memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); - - iounmap(base_addr); - return 0; -} -#else -static inline int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) -{ - return -ENOMEM; -} -#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */ - #ifdef CONFIG_PCI static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) { @@ -184,21 +164,6 @@ static inline int rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { return rt2800_read_eeprom_efuse(rt2x00dev); } -#else -static inline int rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) -{ - return -EOPNOTSUPP; -} - -static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) -{ - return 0; -} - -static inline int rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) -{ - return -EOPNOTSUPP; -} #endif /* CONFIG_PCI */ /* @@ -339,6 +304,7 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, return retval; } +#ifdef CONFIG_PCI /* * Device probe functions. */ @@ -346,9 +312,7 @@ static int rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev) { int retval; - if (rt2x00_is_soc(rt2x00dev)) - retval = rt2800pci_read_eeprom_soc(rt2x00dev); - else if (rt2800pci_efuse_detect(rt2x00dev)) + if (rt2800pci_efuse_detect(rt2x00dev)) retval = rt2800pci_read_eeprom_efuse(rt2x00dev); else retval = rt2800pci_read_eeprom_pci(rt2x00dev); @@ -356,7 +320,6 @@ static int rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev) return retval; } -#ifdef CONFIG_PCI static const struct ieee80211_ops rt2800pci_mac80211_ops = { .tx = rt2x00mac_tx, .start = rt2x00mac_start, @@ -517,6 +480,19 @@ MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); MODULE_LICENSE("GPL"); #if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) +static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev) +{ + void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE); + + if (!base_addr) + return -ENOMEM; + + memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); + + iounmap(base_addr); + return 0; +} + static const struct ieee80211_ops rt2800soc_mac80211_ops = { .tx = rt2x00mac_tx, .start = rt2x00mac_start, @@ -552,7 +528,7 @@ static const struct rt2800_ops rt2800soc_rt2800_ops = { .register_multiread = rt2x00mmio_register_multiread, .register_multiwrite = rt2x00mmio_register_multiwrite, .regbusy_read = rt2x00mmio_regbusy_read, - .read_eeprom = rt2800pci_read_eeprom, + .read_eeprom = rt2800soc_read_eeprom, .hwcrypt_disabled = rt2800pci_hwcrypt_disabled, .drv_write_firmware = rt2800pci_write_firmware, .drv_init_registers = rt2800mmio_init_registers, -- 1.7.10