Return-path: Received: from mail.candelatech.com ([208.74.158.172]:43724 "EHLO ns3.lanforge.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753582Ab3JVS0B (ORCPT ); Tue, 22 Oct 2013 14:26:01 -0400 Message-ID: <5266C321.7000103@candelatech.com> (sfid-20131022_202610_828811_F5522976) Date: Tue, 22 Oct 2013 11:25:37 -0700 From: Ben Greear MIME-Version: 1.0 To: ath10k@lists.infradead.org, "linux-wireless@vger.kernel.org" Subject: ath10k hits warning in sta_info.c:839. Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: Kernel is stock 'ath' tree, with small printk to debug an ath10k crash. This is FYI for now...will be looking at other ath10k crash bugs before digging into this tone. Setup is 2 stations trying to associate to same AP, which causes endless failures and firmware crashes. Good for chasing bugs :) DMAR:[fault reason 05] PTE Write access is not set dmar: DRHD: handling fault status reg 3 dmar: DMAR:[DMA Write] Request device [05:00.0] fault addr ffd52000 DMAR:[fault reason 05] PTE Write access is not set dmar: DRHD: handling fault status reg 3 dmar: DMAR:[DMA Write] Request device [05:00.0] fault addr ffd52000 DMAR:[fault reason 05] PTE Write access is not set sta300: authentication with 00:03:83:3d:30:aa timed out [root@ct523-9292 ~]# ath10k: Failed to delete peer: 00:03:83:3d:30:aa for VDEV: 1 ath10k: WMI vdev stop failed: ret -108 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 6 at /mnt/sda/home/greearb/git/ath/net/mac80211/sta_info.c:839 __sta_info_destroy+0x12) Modules linked in: nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc macvlan pktgen lockd f71882fg coretemp hw] CPU: 1 PID: 6 Comm: kworker/u8:0 Tainted: G WC 3.12.0-rc5-wl+ #1 Hardware name: To be filled by O.E.M. To be filled by O.E.M./HURONRIVER, BIOS 4.6.5 05/02/2012 Workqueue: phy0 ieee80211_iface_work [mac80211] 0000000000000009 ffff8802160d3c28 ffffffff81566b46 ffff88021fa8ec78 0000000000000000 ffff8802160d3c68 ffffffff8109e0a2 ffff8802160d3c78 ffffffffa03ceff2 ffff880215b63800 ffff8800d81505c0 ffff88020dc647c0 Call Trace: [] dump_stack+0x55/0x86 [] warn_slowpath_common+0x77/0x91 [] ? __sta_info_destroy+0x122/0x1d6 [mac80211] [] warn_slowpath_null+0x15/0x17 dmar: DRHD: handling fault status reg 3 dmar: DMAR:[DMA Write] Request device [05:00.0] fault addr ffd51000 DMAR:[fault reason 05] PTE Write access is not set dmar: DRHD: handling fault status reg 3 dmar: DMAR:[DMA Write] Request device [05:00.0] fault addr ffd51000 DMAR:[fault reason 05] PTE Write access is not set [] __sta_info_destroy+0x122/0x1d6 [mac80211] [] sta_info_destroy_addr+0x37/0x59 [mac80211] [] ieee80211_destroy_auth_data+0x2a/0x8c [mac80211] [] ieee80211_sta_work+0x159/0xb2c [mac80211] [] ? ieee80211_wake_queues_by_reason+0x78/0x87 [mac80211] [] ? _raw_spin_unlock_irqrestore+0x27/0x32 [] ieee80211_iface_work+0x29f/0x2c2 [mac80211] [] ? sdata_unlock+0xd/0xf [mac80211] [] ? pwq_activate_delayed_work+0x23/0x31 [] process_one_work+0x162/0x217 [] worker_thread+0x12e/0x1fb [] ? rescuer_thread+0x268/0x268 [] kthread+0x88/0x90 [] ? __kthread_parkme+0x60/0x60 [] ret_from_fork+0x7c/0xb0 [] ? __kthread_parkme+0x60/0x60 ---[ end trace 402f96cbcf4a3d3e ]--- sta300: deauthenticating from 00:03:83:3d:30:aa by local choice (reason=3) ath10k: MSI-X interrupt handling (8 intrs) ath10k: UART prints disabled ath10k: firmware 999.999.0.636 booted ath10k: htt target version 2.1 ath10k: device successfully recovered ath10k: firmware crashed! -- Ben Greear Candela Technologies Inc http://www.candelatech.com