Return-path: <linux-wireless-owner@vger.kernel.org>
Received: from mout.gmx.net ([212.227.17.22]:49484 "EHLO mout.gmx.net"
	rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
	id S1751258Ab3JSPaS (ORCPT <rfc822;linux-wireless@vger.kernel.org>);
	Sat, 19 Oct 2013 11:30:18 -0400
Received: from [192.168.0.103] ([93.218.112.150]) by mail.gmx.com (mrgmx003)
 with ESMTPSA (Nemesis) id 0MCLx3-1VOzm50Wdl-009B4H for
 <linux-wireless@vger.kernel.org>; Sat, 19 Oct 2013 17:30:16 +0200
Message-ID: <5262A585.90607@rempel-privat.de> (sfid-20131019_173021_899634_DFAB970F)
Date: Sat, 19 Oct 2013 17:30:13 +0200
From: Oleksij Rempel <linux@rempel-privat.de>
MIME-Version: 1.0
To: =?UTF-8?B?WWFubmlrIFbDtmxrZXI=?= <yannikv@yahoo.de>
CC: Pontus Fuchs <pontus.fuchs@gmail.com>,
	linux-wireless@vger.kernel.org
Subject: Re: ar5523 Gigaset USB Adapter 108 issue
References: <Pine.LNX.4.44L0.1310181041080.1164-100000@iolanthe.rowland.org> <52614E9B.6040400@rempel-privat.de> <526155ED.1090007@yahoo.de> <52615EFA.80902@rempel-privat.de> <526162ED.8030901@yahoo.de> <52616CD0.2000203@rempel-privat.de> <5262789D.8030704@yahoo.de>
In-Reply-To: <5262789D.8030704@yahoo.de>
Content-Type: text/plain; charset=UTF-8
Sender: linux-wireless-owner@vger.kernel.org
List-ID: <linux-wireless.vger.kernel.org>

Am 19.10.2013 14:18, schrieb Yannik Völker:
> Am 18.10.2013 19:16, schrieb Oleksij Rempel:
>> Am 18.10.2013 18:33, schrieb Yannik Völker:
>>> Am 18.10.2013 18:16, schrieb Oleksij Rempel:
>>>> Am 18.10.2013 17:38, schrieb Yannik Völker:
>>>>> Am 18.10.2013 17:07, schrieb Oleksij Rempel:
>>>>>> Am 18.10.2013 16:49, schrieb Alan Stern:
>>>>>>> Yannik, you should always use Reply-To-All so that your
>>>>>>> messages get sent to the mailing list and not just to
>>>>>>> me.
>>>>>>>
>>>>>>> On Thu, 17 Oct 2013, Yannik Völker wrote:
>>>>>>>
>>>>>>>> Am 07.08.2013 19:34, schrieb Alan Stern:
>>>>>>>>> Please post two usbmon traces, one showing the
>>>>>>>>> failure on your current system and the other showing
>>>>>>>>> the adapter running correctly under a 32-bit kernel.
>>>>>>>>> Instructions for usbmon are in the kernel source
>>>>>>>>> file Documentation/usb/usbmon.txt.
>>>>>>>> I never got it to work under a 32-bit kernel, i was
>>>>>>>> just able to utilize a windows32 driver using
>>>>>>>> ndiswrapper.
>>>>>>>>
>>>>>>>> Now i got it to "work". I randomly found out that the
>>>>>>>> ar5523 driver actually works when you load it after
>>>>>>>> you unload ndiswrapper so the following steps make it
>>>>>>>> work: 1. modprobe ndiswrapper 2. plug in device 3.
>>>>>>>> connect to wlan using ndiswrapper and disconnect again
>>>>>>>> (might be optional) 4. modprobe -r ndiswrapper 5.
>>>>>>>> modprobe ar5523 6. connect to wlan log for that is
>>>>>>>> attatched as wlanthennative2.log
>>>>>
>>>>>
>>>>>> It sounds like linux driver didn't recognised usb id and
>>>>>> didn't uploaded firmware, or there was no firmware to
>>>>>> upload.
>>>>> there is firmware (/lib/firmware/ar5523.bin exists) but it
>>>>> does not even get touched (i renamed the file and the error
>>>>> did not change at all)
>>>
>>>> find first usbid of your adapter (it will be changed after
>>>> firmware upload). And try to force driver to use this id:
>>>> modprobe -v ar5523 echo 07d1 3a0d >
>>>> /sys/bus/usb/drivers/ar5523/new_id
>>>
>>>> instead of "07d1 3a0d" use your id.
>>>
>>>
>>> # lsusb … Bus 003 Device 011: ID 129b:160c CyberTAN Technology
>>> Siemens S30853-S1038-R351 802.11g Wireless Adapter [Atheros
>>> AR5523] …
>>>
>>> # modprobe ar5523 # echo 129b 160c >
>>> /sys/bus/usb/drivers/ar5523/new_id <plugging device in> syslog:
>>> Oct 18 18:27:47 yannik-desktop kernel: [ 8751.447784] usbcore:
>>> registered new interface driver ar5523 Oct 18 18:28:25
>>> yannik-desktop kernel: [ 8789.036912] usb 3-14: new high-speed
>>> USB device number 12 using xhci_hcd Oct 18 18:28:25
>>> yannik-desktop kernel: [ 8789.053995] usb 3-14: New USB device
>>> found, idVendor=129b, idProduct=160c Oct 18 18:28:25
>>> yannik-desktop kernel: [ 8789.054005] usb 3-14: New USB device
>>> strings: Mfr=1, Product=2, SerialNumber=3 Oct 18 18:28:25
>>> yannik-desktop kernel: [ 8789.054010] usb 3-14: Product: AR5523
>>> Oct 18 18:28:25 yannik-desktop kernel: [ 8789.054015] usb 3-14:
>>> Manufacturer: Atheros Communications Inc Oct 18 18:28:25
>>> yannik-desktop kernel: [ 8789.054019] usb 3-14: SerialNumber:
>>> 1.0 Oct 18 18:28:27 yannik-desktop kernel: [ 8791.052313] usb
>>> 3-14: timeout waiting for command 01 reply Oct 18 18:28:27
>>> yannik-desktop kernel: [ 8791.052323] usb 3-14: could not
>>> initialize adapter Oct 18 18:28:27 yannik-desktop kernel: [
>>> 8791.052359] usb 3-14: RX USB error -2. Oct 18 18:28:27
>>> yannik-desktop kernel: [ 8791.052378] usb 3-14: error -1 when
>>> submitting rx urb Oct 18 18:28:27 yannik-desktop kernel: [
>>> 8791.052504] ar5523: probe of 3-14:1.0 failed with error -110
>>>
>>>> Besidy, what kernel version are you using? May be it is too
>>>> old..
>>>
>>> 3.11.0-12-generic it is my understanding that the ar5523 driver
>>> was included from 3.8 on.
> 
>> please test attached patch.
> Stopped the error from appearing but it looks like it would not even try
> to upload the firmware to me:
> 
> [  708.193488] cfg80211: Calling CRDA to update world regulatory domain
> 
> 
> [  708.492120] usbcore: registered new interface driver ar5523
> 
> 
> [  708.509819] cfg80211: World regulatory domain updated:
> 
> 
> [  708.509822] cfg80211:   (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp)
> 
> [  708.509823] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm)
> [  708.509824] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm)
> [  708.509825] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300
> mBi, 2000 mBm)
> [  708.509826] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm)
> [  708.509827] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm)
> [  720.232697] usb 3-14: USB disconnect, device number 8
> [  721.721980] usb 3-14: new high-speed USB device number 9 using xhci_hcd
> [  721.739153] usb 3-14: New USB device found, idVendor=129b,
> idProduct=160c
> [  721.739163] usb 3-14: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [  721.739168] usb 3-14: Product: AR5523
> [  721.739174] usb 3-14: Manufacturer: Atheros Communications Inc
> [  721.739178] usb 3-14: SerialNumber: 1.0
> mtp-probe: checking bus 3, device 9:
> "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-14"
> mtp-probe: bus: 3, device: 9 was not an MTP device
> 
> also it did not load the module on plugging in.

does not looks like it is complete log. Please attach your dmesg.

-- 
Regards,
Oleksij