Return-path: Received: from arrakis.dune.hu ([78.24.191.176]:50096 "EHLO arrakis.dune.hu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754150Ab3JCSAt (ORCPT ); Thu, 3 Oct 2013 14:00:49 -0400 From: Gabor Juhos To: John Linville Cc: linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com, Gabor Juhos Subject: [PATCH v2 2/4] rt2x00: rt2800lib: fix VGC adjustment for RT3572 and RT3593 Date: Thu, 3 Oct 2013 20:00:41 +0200 Message-Id: <1380823243-11149-2-git-send-email-juhosg@openwrt.org> (sfid-20131003_200057_418796_019B28F9) In-Reply-To: <1380823243-11149-1-git-send-email-juhosg@openwrt.org> References: <1380823243-11149-1-git-send-email-juhosg@openwrt.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: The Ralink DPO_RT5572_LinuxSTA_2.6.1.3_20121022 reference driver uses different RSSI threshold and VGC adjustment values for the RT3572 and RT3593 chipsets. Update the rt2800_link_tuner function to use the same values. Also change the comment in the function to make it more generic. References: RT35xx_ChipAGCAdjust function in chips/rt35xx.c RSSI_FOR_MID_LOW_SENSIBILITY constant in include/chip/rtmp_phy.h RT3593_R66_MID_LOW_SENS_GET macro in include/chip/rt3593.h RT3593_R66_NON_MID_LOW_SEMS_GET macro in include/chips/rt3593.h Signed-off-by: Gabor Juhos --- drivers/net/wireless/rt2x00/rt2800lib.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 2690081..a619f2c 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4462,19 +4462,34 @@ void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) return; - /* - * When RSSI is better then -80 increase VGC level with 0x10, except - * for rt5592 chip. + + /* When RSSI is better than a certain threshold, increase VGC + * with a chip specific value in order to improve the balance + * between sensibility and noise isolation. */ vgc = rt2800_get_default_vgc(rt2x00dev); - if (rt2x00_rt(rt2x00dev, RT5592)) { + switch (rt2x00dev->chip.rt) { + case RT3572: + case RT3593: + if (qual->rssi > -65) { + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) + vgc += 0x20; + else + vgc += 0x10; + } + break; + + case RT5592: if (qual->rssi > -65) vgc += 0x20; - } else { + break; + + default: if (qual->rssi > -80) vgc += 0x10; + break; } rt2800_set_vgc(rt2x00dev, qual, vgc); -- 1.7.10