Return-path: Received: from mail-ea0-f178.google.com ([209.85.215.178]:54208 "EHLO mail-ea0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753941Ab3LaRQJ (ORCPT ); Tue, 31 Dec 2013 12:16:09 -0500 Received: by mail-ea0-f178.google.com with SMTP id d10so5569681eaj.23 for ; Tue, 31 Dec 2013 09:16:08 -0800 (PST) From: Emmanuel Grumbach To: linux-wireless@vger.kernel.org Cc: Emmanuel Grumbach Subject: [PATCH 04/28] iwlwifi: pcie: move the ICT / non-ICT handling functions Date: Tue, 31 Dec 2013 19:15:33 +0200 Message-Id: <1388510157-23345-4-git-send-email-egrumbach@gmail.com> (sfid-20131231_181616_012413_6D53F0C3) In-Reply-To: <52C2FB68.2010708@gmail.com> References: <52C2FB68.2010708@gmail.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Emmanuel Grumbach The purpose of this is to be able to call these functions from the interrupt handler and not from the primary interrupt handler. Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/rx.c | 324 ++++++++++++++++---------------- 1 file changed, 162 insertions(+), 162 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 54a2f4a..7085cda 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -807,6 +807,168 @@ static void iwl_pcie_irq_handle_error(struct iwl_trans *trans) wake_up(&trans_pcie->wait_command_queue); } +/* legacy (non-ICT) ISR. Assumes that trans_pcie->irq_lock is held */ +static irqreturn_t iwl_pcie_isr_non_ict(struct iwl_trans *trans) +{ + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + u32 inta; + + lockdep_assert_held(&trans_pcie->irq_lock); + + trace_iwlwifi_dev_irq(trans->dev); + + /* Discover which interrupts are active/pending */ + inta = iwl_read32(trans, CSR_INT); + + if (inta & (~trans_pcie->inta_mask)) { + IWL_DEBUG_ISR(trans, + "We got a masked interrupt (0x%08x)...Ack and ignore\n", + inta & (~trans_pcie->inta_mask)); + iwl_write32(trans, CSR_INT, inta & (~trans_pcie->inta_mask)); + inta &= trans_pcie->inta_mask; + } + + /* Ignore interrupt if there's nothing in NIC to service. + * This may be due to IRQ shared with another device, + * or due to sporadic interrupts thrown from our NIC. */ + if (!inta) { + IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n"); + /* + * Re-enable interrupts here since we don't have anything to + * service, but only in case the handler won't run. Note that + * the handler can be scheduled because of a previous + * interrupt. + */ + if (test_bit(STATUS_INT_ENABLED, &trans->status) && + !trans_pcie->inta) + iwl_enable_interrupts(trans); + return IRQ_NONE; + } + + if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { + /* Hardware disappeared. It might have already raised + * an interrupt */ + IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta); + return IRQ_HANDLED; + } + + if (iwl_have_debug_level(IWL_DL_ISR)) + IWL_DEBUG_ISR(trans, + "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", + inta, trans_pcie->inta_mask, + iwl_read32(trans, CSR_FH_INT_STATUS)); + + trans_pcie->inta |= inta; + /* the thread will service interrupts and re-enable them */ + return IRQ_WAKE_THREAD; +} + +/* a device (PCI-E) page is 4096 bytes long */ +#define ICT_SHIFT 12 +#define ICT_SIZE (1 << ICT_SHIFT) +#define ICT_COUNT (ICT_SIZE / sizeof(u32)) + +/* interrupt handler using ict table, with this interrupt driver will + * stop using INTA register to get device's interrupt, reading this register + * is expensive, device will write interrupts in ICT dram table, increment + * index then will fire interrupt to driver, driver will OR all ICT table + * entries from current index up to table entry with 0 value. the result is + * the interrupt we need to service, driver will set the entries back to 0 and + * set index. + */ +static irqreturn_t iwl_pcie_isr_ict(struct iwl_trans *trans) +{ + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + unsigned long flags; + irqreturn_t ret; + u32 inta; + u32 val = 0; + u32 read; + + spin_lock_irqsave(&trans_pcie->irq_lock, flags); + + /* dram interrupt table not set yet, + * use legacy interrupt. + */ + if (unlikely(!trans_pcie->use_ict)) { + ret = iwl_pcie_isr_non_ict(trans); + spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); + return ret; + } + + trace_iwlwifi_dev_irq(trans->dev); + + /* Ignore interrupt if there's nothing in NIC to service. + * This may be due to IRQ shared with another device, + * or due to sporadic interrupts thrown from our NIC. */ + read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]); + trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, read); + if (!read) { + IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n"); + goto none; + } + + /* + * Collect all entries up to the first 0, starting from ict_index; + * note we already read at ict_index. + */ + do { + val |= read; + IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n", + trans_pcie->ict_index, read); + trans_pcie->ict_tbl[trans_pcie->ict_index] = 0; + trans_pcie->ict_index = + iwl_queue_inc_wrap(trans_pcie->ict_index, ICT_COUNT); + + read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]); + trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, + read); + } while (read); + + /* We should not get this value, just ignore it. */ + if (val == 0xffffffff) + val = 0; + + /* + * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit + * (bit 15 before shifting it to 31) to clear when using interrupt + * coalescing. fortunately, bits 18 and 19 stay set when this happens + * so we use them to decide on the real state of the Rx bit. + * In order words, bit 15 is set if bit 18 or bit 19 are set. + */ + if (val & 0xC0000) + val |= 0x8000; + + inta = (0xff & val) | ((0xff00 & val) << 16); + IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled(sw) 0x%08x ict 0x%08x\n", + inta, trans_pcie->inta_mask, val); + if (iwl_have_debug_level(IWL_DL_ISR)) + IWL_DEBUG_ISR(trans, "enabled(hw) 0x%08x\n", + iwl_read32(trans, CSR_INT_MASK)); + + inta &= trans_pcie->inta_mask; + trans_pcie->inta |= inta; + + /* iwl_pcie_tasklet() will service interrupts and re-enable them */ + if (likely(inta)) { + spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); + return IRQ_WAKE_THREAD; + } + + ret = IRQ_HANDLED; + + none: + /* re-enable interrupts here since we don't have anything to service. + * only Re-enable if disabled by irq. + */ + if (test_bit(STATUS_INT_ENABLED, &trans->status) && + !trans_pcie->inta) + iwl_enable_interrupts(trans); + + spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); + return ret; +} + irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) { struct iwl_trans *trans = dev_id; @@ -1019,11 +1181,6 @@ out: * ******************************************************************************/ -/* a device (PCI-E) page is 4096 bytes long */ -#define ICT_SHIFT 12 -#define ICT_SIZE (1 << ICT_SHIFT) -#define ICT_COUNT (ICT_SIZE / sizeof(u32)) - /* Free dram table */ void iwl_pcie_free_ict(struct iwl_trans *trans) { @@ -1110,163 +1267,6 @@ void iwl_pcie_disable_ict(struct iwl_trans *trans) spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); } -/* legacy (non-ICT) ISR. Assumes that trans_pcie->irq_lock is held */ -static irqreturn_t iwl_pcie_isr_non_ict(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - u32 inta; - - lockdep_assert_held(&trans_pcie->irq_lock); - - trace_iwlwifi_dev_irq(trans->dev); - - /* Discover which interrupts are active/pending */ - inta = iwl_read32(trans, CSR_INT); - - if (inta & (~trans_pcie->inta_mask)) { - IWL_DEBUG_ISR(trans, - "We got a masked interrupt (0x%08x)...Ack and ignore\n", - inta & (~trans_pcie->inta_mask)); - iwl_write32(trans, CSR_INT, inta & (~trans_pcie->inta_mask)); - inta &= trans_pcie->inta_mask; - } - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - if (!inta) { - IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n"); - /* - * Re-enable interrupts here since we don't have anything to - * service, but only in case the handler won't run. Note that - * the handler can be scheduled because of a previous - * interrupt. - */ - if (test_bit(STATUS_INT_ENABLED, &trans->status) && - !trans_pcie->inta) - iwl_enable_interrupts(trans); - return IRQ_NONE; - } - - if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { - /* Hardware disappeared. It might have already raised - * an interrupt */ - IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta); - return IRQ_HANDLED; - } - - if (iwl_have_debug_level(IWL_DL_ISR)) - IWL_DEBUG_ISR(trans, - "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", - inta, trans_pcie->inta_mask, - iwl_read32(trans, CSR_FH_INT_STATUS)); - - trans_pcie->inta |= inta; - /* the thread will service interrupts and re-enable them */ - return IRQ_WAKE_THREAD; -} - -/* interrupt handler using ict table, with this interrupt driver will - * stop using INTA register to get device's interrupt, reading this register - * is expensive, device will write interrupts in ICT dram table, increment - * index then will fire interrupt to driver, driver will OR all ICT table - * entries from current index up to table entry with 0 value. the result is - * the interrupt we need to service, driver will set the entries back to 0 and - * set index. - */ -static irqreturn_t iwl_pcie_isr_ict(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - unsigned long flags; - irqreturn_t ret; - u32 inta; - u32 val = 0; - u32 read; - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - /* dram interrupt table not set yet, - * use legacy interrupt. - */ - if (unlikely(!trans_pcie->use_ict)) { - ret = iwl_pcie_isr_non_ict(trans); - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return ret; - } - - trace_iwlwifi_dev_irq(trans->dev); - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]); - trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, read); - if (!read) { - IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n"); - goto none; - } - - /* - * Collect all entries up to the first 0, starting from ict_index; - * note we already read at ict_index. - */ - do { - val |= read; - IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n", - trans_pcie->ict_index, read); - trans_pcie->ict_tbl[trans_pcie->ict_index] = 0; - trans_pcie->ict_index = - iwl_queue_inc_wrap(trans_pcie->ict_index, ICT_COUNT); - - read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]); - trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, - read); - } while (read); - - /* We should not get this value, just ignore it. */ - if (val == 0xffffffff) - val = 0; - - /* - * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit - * (bit 15 before shifting it to 31) to clear when using interrupt - * coalescing. fortunately, bits 18 and 19 stay set when this happens - * so we use them to decide on the real state of the Rx bit. - * In order words, bit 15 is set if bit 18 or bit 19 are set. - */ - if (val & 0xC0000) - val |= 0x8000; - - inta = (0xff & val) | ((0xff00 & val) << 16); - IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled(sw) 0x%08x ict 0x%08x\n", - inta, trans_pcie->inta_mask, val); - if (iwl_have_debug_level(IWL_DL_ISR)) - IWL_DEBUG_ISR(trans, "enabled(hw) 0x%08x\n", - iwl_read32(trans, CSR_INT_MASK)); - - inta &= trans_pcie->inta_mask; - trans_pcie->inta |= inta; - - /* iwl_pcie_tasklet() will service interrupts and re-enable them */ - if (likely(inta)) { - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_WAKE_THREAD; - } - - ret = IRQ_HANDLED; - - none: - /* re-enable interrupts here since we don't have anything to service. - * only Re-enable if disabled by irq. - */ - if (test_bit(STATUS_INT_ENABLED, &trans->status) && - !trans_pcie->inta) - iwl_enable_interrupts(trans); - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return ret; -} - irqreturn_t iwl_pcie_isr(int irq, void *data) { struct iwl_trans *trans = data; -- 1.7.9.5