Return-path: Received: from sabertooth01.qualcomm.com ([65.197.215.72]:5688 "EHLO sabertooth01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751043AbaBOGsi (ORCPT ); Sat, 15 Feb 2014 01:48:38 -0500 From: Kalle Valo To: Michal Kazior CC: , Subject: Re: [PATCH v2] ath10k: fix SMPS support References: <1391673591-8907-1-git-send-email-michal.kazior@tieto.com> <1392385551-3590-1-git-send-email-michal.kazior@tieto.com> Date: Sat, 15 Feb 2014 08:48:32 +0200 In-Reply-To: <1392385551-3590-1-git-send-email-michal.kazior@tieto.com> (Michal Kazior's message of "Fri, 14 Feb 2014 14:45:51 +0100") Message-ID: <87txc050sf.fsf@kamboji.qca.qualcomm.com> (sfid-20140215_074904_056300_DA551778) MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: linux-wireless-owner@vger.kernel.org List-ID: Michal Kazior writes: > Firmware ignores SMPS flags in peer assoc command. > > For SMPS to work it is necessary to set peer > parameter after peer assoc command so that tx > chainmask is setup properly. > > This should fix packet loss and improve throughput > with stations that have SMPS enabled upon > association. > > Signed-off-by: Michal Kazior Thanks, applied. -- Kalle Valo