Return-path: Received: from ring0.de ([5.45.105.125]:33027 "EHLO smtp.ring0.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752842AbaBNXG6 (ORCPT ); Fri, 14 Feb 2014 18:06:58 -0500 From: Sebastian Reichel To: Sebastian Reichel , Luciano Coelho , Tony Lindgren , "John W. Linville" Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Rob Landley , Kumar Gala , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, linux-omap@vger.kernel.org, netdev@vger.kernel.org, Sebastian Reichel Subject: [PATCHv2 2/5] wl1251: move power GPIO handling into the driver Date: Sat, 15 Feb 2014 00:05:53 +0100 Message-Id: <1392419156-14394-3-git-send-email-sre@debian.org> (sfid-20140215_000913_156471_A8637AEF) In-Reply-To: <1392419156-14394-1-git-send-email-sre@debian.org> References: <20140125000929.GD25488@atomide.com> <1392419156-14394-1-git-send-email-sre@debian.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: Move the power GPIO handling from the board code into the driver. This is a dependency for device tree support. Signed-off-by: Sebastian Reichel Reviewed-by: Pavel Machek Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3pandora.c | 2 ++ arch/arm/mach-omap2/board-rx51-peripherals.c | 11 ++-------- drivers/net/wireless/ti/wl1251/sdio.c | 21 +++++++++++++----- drivers/net/wireless/ti/wl1251/spi.c | 33 ++++++++++++++++++---------- drivers/net/wireless/ti/wl1251/wl1251.h | 2 +- include/linux/wl12xx.h | 2 +- 6 files changed, 43 insertions(+), 28 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 24f3c1b..cf18340 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -541,6 +541,8 @@ static void __init pandora_wl1251_init(void) memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); + pandora_wl1251_pdata.power_gpio = -1; + ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); if (ret < 0) goto fail; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index e05e740..ddfc8df 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -1173,13 +1173,7 @@ static inline void board_smc91x_init(void) #endif -static void rx51_wl1251_set_power(bool enable) -{ - gpio_set_value(RX51_WL1251_POWER_GPIO, enable); -} - static struct gpio rx51_wl1251_gpios[] __initdata = { - { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, }; @@ -1196,17 +1190,16 @@ static void __init rx51_init_wl1251(void) if (irq < 0) goto err_irq; - wl1251_pdata.set_power = rx51_wl1251_set_power; + wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO; rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; return; err_irq: gpio_free(RX51_WL1251_IRQ_GPIO); - gpio_free(RX51_WL1251_POWER_GPIO); error: printk(KERN_ERR "wl1251 board initialisation failed\n"); - wl1251_pdata.set_power = NULL; + wl1251_pdata.power_gpio = -1; /* * Now rx51_peripherals_spi_board_info[1].irq is zero and diff --git a/drivers/net/wireless/ti/wl1251/sdio.c b/drivers/net/wireless/ti/wl1251/sdio.c index b75a37a..b661f89 100644 --- a/drivers/net/wireless/ti/wl1251/sdio.c +++ b/drivers/net/wireless/ti/wl1251/sdio.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "wl1251.h" @@ -182,8 +183,9 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable) * callback in case it wants to do any additional setup, * for example enabling clock buffer for the module. */ - if (wl->set_power) - wl->set_power(true); + if (gpio_is_valid(wl->power_gpio)) + gpio_set_value(wl->power_gpio, true); + ret = pm_runtime_get_sync(&func->dev); if (ret < 0) { @@ -203,8 +205,8 @@ static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable) if (ret < 0) goto out; - if (wl->set_power) - wl->set_power(false); + if (gpio_is_valid(wl->power_gpio)) + gpio_set_value(wl->power_gpio, false); } out: @@ -256,11 +258,20 @@ static int wl1251_sdio_probe(struct sdio_func *func, wl1251_board_data = wl1251_get_platform_data(); if (!IS_ERR(wl1251_board_data)) { - wl->set_power = wl1251_board_data->set_power; + wl->power_gpio = wl1251_board_data->power_gpio; wl->irq = wl1251_board_data->irq; wl->use_eeprom = wl1251_board_data->use_eeprom; } + if (gpio_is_valid(wl->power_gpio)) { + ret = devm_gpio_request(&func->dev, wl->power_gpio, + "wl1251 power"); + if (ret) { + wl1251_error("Failed to request gpio: %d\n", ret); + goto disable; + } + } + if (wl->irq) { irq_set_status_flags(wl->irq, IRQ_NOAUTOEN); ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl); diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c index 62403a1..6abcbc3 100644 --- a/drivers/net/wireless/ti/wl1251/spi.c +++ b/drivers/net/wireless/ti/wl1251/spi.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "wl1251.h" #include "reg.h" @@ -221,8 +222,8 @@ static void wl1251_spi_disable_irq(struct wl1251 *wl) static int wl1251_spi_set_power(struct wl1251 *wl, bool enable) { - if (wl->set_power) - wl->set_power(enable); + if (gpio_is_valid(wl->power_gpio)) + gpio_set_value(wl->power_gpio, enable); return 0; } @@ -271,22 +272,33 @@ static int wl1251_spi_probe(struct spi_device *spi) goto out_free; } - wl->set_power = pdata->set_power; - if (!wl->set_power) { - wl1251_error("set power function missing in platform data"); - return -ENODEV; + wl->power_gpio = pdata->power_gpio; + + if (gpio_is_valid(wl->power_gpio)) { + ret = devm_gpio_request_one(&spi->dev, wl->power_gpio, + GPIOF_OUT_INIT_LOW, "wl1251 power"); + if (ret) { + wl1251_error("Failed to request gpio: %d\n", ret); + goto out_free; + } + } else { + wl1251_error("set power gpio missing in platform data"); + ret = -ENODEV; + goto out_free; } wl->irq = spi->irq; if (wl->irq < 0) { wl1251_error("irq missing in platform data"); - return -ENODEV; + ret = -ENODEV; + goto out_free; } wl->use_eeprom = pdata->use_eeprom; irq_set_status_flags(wl->irq, IRQ_NOAUTOEN); - ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl); + ret = devm_request_irq(&spi->dev, wl->irq, wl1251_irq, 0, + DRIVER_NAME, wl); if (ret < 0) { wl1251_error("request_irq() failed: %d", ret); goto out_free; @@ -296,13 +308,10 @@ static int wl1251_spi_probe(struct spi_device *spi) ret = wl1251_init_ieee80211(wl); if (ret) - goto out_irq; + goto out_free; return 0; - out_irq: - free_irq(wl->irq, wl); - out_free: ieee80211_free_hw(hw); diff --git a/drivers/net/wireless/ti/wl1251/wl1251.h b/drivers/net/wireless/ti/wl1251/wl1251.h index 235617a..389fe25 100644 --- a/drivers/net/wireless/ti/wl1251/wl1251.h +++ b/drivers/net/wireless/ti/wl1251/wl1251.h @@ -276,7 +276,7 @@ struct wl1251 { void *if_priv; const struct wl1251_if_operations *if_ops; - void (*set_power)(bool enable); + int power_gpio; int irq; bool use_eeprom; diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index b516b4f..a9c723b 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -49,7 +49,7 @@ enum { }; struct wl1251_platform_data { - void (*set_power)(bool enable); + int power_gpio; /* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */ int irq; bool use_eeprom; -- 1.8.5.3