Return-path: Received: from wolverine02.qualcomm.com ([199.106.114.251]:24148 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933482AbaCQNe5 (ORCPT ); Mon, 17 Mar 2014 09:34:57 -0400 From: Vladimir Kondratiev To: "John W . Linville" CC: Vladimir Kondratiev , , Subject: [PATCH 09/21] wil6210: fix for HW bug in interrupt setup logic Date: Mon, 17 Mar 2014 15:34:13 +0200 Message-ID: <1395063265-6522-10-git-send-email-qca_vkondrat@qca.qualcomm.com> (sfid-20140317_143508_351589_112161C2) In-Reply-To: <1395063265-6522-1-git-send-email-qca_vkondrat@qca.qualcomm.com> References: <1395063265-6522-1-git-send-email-qca_vkondrat@qca.qualcomm.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: Hardware bug triggered by the MSI init while INTx asserted for some reason. De-assert INTx prior to MSI set-up Signed-off-by: Vladimir Kondratiev --- drivers/net/wireless/ath/wil6210/interrupt.c | 17 +++++++++++++++++ drivers/net/wireless/ath/wil6210/pcie_bus.c | 1 + drivers/net/wireless/ath/wil6210/wil6210.h | 1 + 3 files changed, 19 insertions(+) diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index 10919f9..52c40e1 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -493,6 +493,23 @@ free0: return rc; } +/* can't use wil_ioread32_and_clear because ICC value is not ser yet */ +static inline void wil_clear32(void __iomem *addr) +{ + u32 x = ioread32(addr); + + iowrite32(x, addr); +} + +void wil6210_clear_irq(struct wil6210_priv *wil) +{ + wil_clear32(wil->csr + HOSTADDR(RGF_DMA_EP_RX_ICR) + + offsetof(struct RGF_ICR, ICR)); + wil_clear32(wil->csr + HOSTADDR(RGF_DMA_EP_TX_ICR) + + offsetof(struct RGF_ICR, ICR)); + wil_clear32(wil->csr + HOSTADDR(RGF_DMA_EP_MISC_ICR) + + offsetof(struct RGF_ICR, ICR)); +} int wil6210_init_irq(struct wil6210_priv *wil, int irq) { diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index d96e811..c609761 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -153,6 +153,7 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_drvdata(pdev, wil); wil->pdev = pdev; + wil6210_clear_irq(wil); /* FW should raise IRQ when ready */ rc = wil_if_pcie_enable(wil); if (rc) { diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 14f861c..317621c 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -476,6 +476,7 @@ int wmi_rxon(struct wil6210_priv *wil, bool on); int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r); int wmi_disconnect_sta(struct wil6210_priv *wil, const u8 *mac, u16 reason); +void wil6210_clear_irq(struct wil6210_priv *wil); int wil6210_init_irq(struct wil6210_priv *wil, int irq); void wil6210_fini_irq(struct wil6210_priv *wil, int irq); void wil6210_disable_irq(struct wil6210_priv *wil); -- 1.8.3.2