From: fariyaf@gmail.com
To: linux-wireless@vger.kernel.org
Cc: Fariya Fatima <fariyaf@gmail.com>
Subject: [PATCH v4 10/11] rsi: Remaining SDIO functionality.
Date: Mon, 10 Mar 2014 20:56:38 +0530
Message-Id: <1394465199-10042-11-git-send-email-fariyaf@gmail.com> (sfid-20140310_162726_761314_A6D93D91)
In-Reply-To: <1394465199-10042-1-git-send-email-fariyaf@gmail.com>
References: <1394465199-10042-1-git-send-email-fariyaf@gmail.com>
Sender: linux-wireless-owner@vger.kernel.org

From: Fariya Fatima <fariyaf@gmail.com>

Signed-off-by: Fariya Fatima <fariyaf@gmail.com>

This patch adds the functions required by the rsi_sdio module.
---
 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c |  566 +++++++++++++++++++++++++++
 1 files changed, 566 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c

diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
new file mode 100644
index 0000000..3fdbd25
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
@@ -0,0 +1,566 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/firmware.h>
+#include "rsi_sdio.h"
+#include "rsi_common.h"
+
+/**
+ * rsi_sdio_master_access_msword() - This function sets the AHB master access
+ *				     MS word in the SDIO slave registers.
+ * @adapter: Pointer to the adapter structure.
+ * @ms_word: ms word need to be initialized.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
+					 u16 ms_word)
+{
+	u8 byte;
+	u8 function = 0;
+	int status = 0;
+
+	byte = (u8)(ms_word & 0x00FF);
+
+	rsi_dbg(INIT_ZONE,
+		"%s: MASTER_ACCESS_MSBYTE:0x%x\n", __func__, byte);
+
+	status = rsi_write_register(adapter,
+				    function,
+				    SDIO_MASTER_ACCESS_MSBYTE,
+				    &byte);
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: fail to access MASTER_ACCESS_MSBYTE\n",
+			__func__);
+		return -1;
+	}
+
+	byte = (u8)(ms_word >> 8);
+
+	rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte);
+	status = rsi_write_register(adapter,
+				    function,
+				    SDIO_MASTER_ACCESS_LSBYTE,
+				    &byte);
+	return status;
+}
+
+/**
+ * rsi_copy_to_card() - This function includes the actual funtionality of
+ *			copying the TA firmware to the card.Basically this
+ *			function includes opening the TA file,reading the
+ *			TA file and writing their values in blocks of data.
+ * @common: Pointer to the driver private structure.
+ * @fw: Pointer to the firmware value to be written.
+ * @len: length of firmware file.
+ * @num_blocks: Number of blocks to be written to the card.
+ *
+ * Return: 0 on success and -1 on failure.
+ */
+static int rsi_copy_to_card(struct rsi_common *common,
+			    const u8 *fw,
+			    u32 len,
+			    u32 num_blocks)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u32 indx, ii;
+	u32 block_size = dev->tx_blk_size;
+	u32 lsb_address;
+	__le32 data[] = { TA_HOLD_THREAD_VALUE, TA_SOFT_RST_CLR,
+			  TA_PC_ZERO, TA_RELEASE_THREAD_VALUE };
+	u32 address[] = { TA_HOLD_THREAD_REG, TA_SOFT_RESET_REG,
+			  TA_TH0_PC_REG, TA_RELEASE_THREAD_REG };
+	u32 base_address;
+	u16 msb_address;
+
+	base_address = TA_LOAD_ADDRESS;
+	msb_address = base_address >> 16;
+
+	for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
+		lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
+		if (rsi_write_register_multiple(adapter,
+						lsb_address,
+						(u8 *)(fw + indx),
+						block_size)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to load %s blk\n", __func__,
+				FIRMWARE_RSI9113);
+			return -1;
+		}
+		rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
+		base_address += block_size;
+		if ((base_address >> 16) != msb_address) {
+			msb_address += 1;
+			if (rsi_sdio_master_access_msword(adapter,
+							  msb_address)) {
+				rsi_dbg(ERR_ZONE,
+					"%s: Unable to set ms word reg\n",
+					__func__);
+				return -1;
+			}
+		}
+	}
+
+	if (len % block_size) {
+		lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
+		if (rsi_write_register_multiple(adapter,
+						lsb_address,
+						(u8 *)(fw + indx),
+						len % block_size)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to load f/w\n", __func__);
+			return -1;
+		}
+	}
+	rsi_dbg(INIT_ZONE,
+		"%s: Succesfully loaded TA instructions\n", __func__);
+
+	if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set ms word to common reg\n",
+			__func__);
+		return -1;
+	}
+
+	for (ii = 0; ii < ARRAY_SIZE(data); ii++) {
+		/* Bringing TA out of reset */
+		if (rsi_write_register_multiple(adapter,
+						(address[ii] |
+						RSI_SD_REQUEST_MASTER),
+						(u8 *)&data[ii],
+						4)) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Unable to hold TA threads\n", __func__);
+			return -1;
+		}
+	}
+
+	rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
+	return 0;
+}
+
+/**
+ * rsi_load_ta_instructions() - This function includes the actual funtionality
+ *				of loading the TA firmware.This function also
+ *				includes opening the TA file,reading the TA
+ *				file and writing their value in blocks of data.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_load_ta_instructions(struct rsi_common *common)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u32 len;
+	u32 num_blocks;
+	const u8 *fw;
+	const struct firmware *fw_entry = NULL;
+	u32 block_size = dev->tx_blk_size;
+	int status = 0;
+	u32 base_address;
+	u16 msb_address;
+
+	if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set ms word to common reg\n",
+			__func__);
+		return -1;
+	}
+	base_address = TA_LOAD_ADDRESS;
+	msb_address = (base_address >> 16);
+
+	if (rsi_sdio_master_access_msword(adapter, msb_address)) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unable to set ms word reg\n", __func__);
+		return -1;
+	}
+
+	status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
+	if (status < 0) {
+		rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
+			__func__, FIRMWARE_RSI9113);
+		return status;
+	}
+
+	fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+	len = fw_entry->size;
+
+	if (len % 4)
+		len += (4 - (len % 4));
+
+	num_blocks = (len / block_size);
+
+	rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
+	rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
+
+	status = rsi_copy_to_card(common, fw, len, num_blocks);
+	release_firmware(fw_entry);
+	return status;
+}
+
+/**
+ * rsi_process_pkt() - This Function reads rx_blocks register and figures out
+ *		       the size of the rx pkt.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_process_pkt(struct rsi_common *common)
+{
+	struct rsi_hw *adapter = common->priv;
+	u8 num_blks = 0;
+	u32 rcv_pkt_len = 0;
+	int status = 0;
+
+	status = rsi_read_register(adapter,
+				   SDIO_RX_NUM_BLOCKS_REG,
+				   &num_blks);
+
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to read pkt length from the card:\n",
+			__func__);
+		return status;
+	}
+	rcv_pkt_len = (num_blks * 256);
+
+	common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL);
+	if (!common->rx_data_pkt) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in memory allocation\n",
+			__func__);
+		return -1;
+	}
+
+	status = rsi_host_intf_read_pkt(adapter,
+					common->rx_data_pkt,
+					rcv_pkt_len);
+	if (status) {
+		rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n",
+			__func__);
+		goto fail;
+	}
+
+	status = rsi_read_pkt(common, rcv_pkt_len);
+	kfree(common->rx_data_pkt);
+	return status;
+
+fail:
+	kfree(common->rx_data_pkt);
+	return -1;
+}
+
+/**
+ * rsi_init_sdio_slave_regs() - This function does the actual initialization
+ *				of SDBUS slave registers.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_init_sdio_slave_regs(struct rsi_hw *adapter)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u8 function = 0;
+	u8 byte;
+	int status = 0;
+
+	if (dev->next_read_delay) {
+		byte = dev->next_read_delay;
+		status = rsi_write_register(adapter,
+					    function,
+					    SDIO_NXT_RD_DELAY2,
+					    &byte);
+		if (status) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed to write SDIO_NXT_RD_DELAY2\n",
+				__func__);
+			return -1;
+		}
+	}
+
+	if (dev->sdio_high_speed_enable) {
+		rsi_dbg(INIT_ZONE, "%s: Enabling SDIO High speed\n", __func__);
+		byte = 0x3;
+
+		status = rsi_write_register(adapter,
+					    function,
+					    SDIO_REG_HIGH_SPEED,
+					    &byte);
+		if (status) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed to enable SDIO high speed\n",
+				__func__);
+			return -1;
+		}
+	}
+
+	/* This tells SDIO FIFO when to start read to host */
+	rsi_dbg(INIT_ZONE, "%s: Initialzing SDIO read start level\n", __func__);
+	byte = 0x24;
+
+	status = rsi_write_register(adapter,
+				    function,
+				    SDIO_READ_START_LVL,
+				    &byte);
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to write SDIO_READ_START_LVL\n", __func__);
+		return -1;
+	}
+
+	rsi_dbg(INIT_ZONE, "%s: Initialzing FIFO ctrl registers\n", __func__);
+	byte = (128 - 32);
+
+	status = rsi_write_register(adapter,
+				    function,
+				    SDIO_READ_FIFO_CTL,
+				    &byte);
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to write SDIO_READ_FIFO_CTL\n", __func__);
+		return -1;
+	}
+
+	byte = 32;
+	status = rsi_write_register(adapter,
+				    function,
+				    SDIO_WRITE_FIFO_CTL,
+				    &byte);
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to write SDIO_WRITE_FIFO_CTL\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * rsi_interrupt_handler() - This function read and process SDIO interrupts.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+void rsi_interrupt_handler(struct rsi_hw *adapter)
+{
+	struct rsi_common *common = adapter->priv;
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	int status;
+	enum sdio_interrupt_type isr_type;
+	u8 isr_status = 0;
+	u8 fw_status = 0;
+
+	dev->rx_info.sdio_int_counter++;
+
+	do {
+		mutex_lock(&common->tx_rxlock);
+		status = rsi_read_register(common->priv,
+						   RSI_FN1_INT_REGISTER,
+						   &isr_status);
+		if (status) {
+			rsi_dbg(ERR_ZONE,
+				"%s: Failed to Read Intr Status Register\n",
+				__func__);
+			mutex_unlock(&common->tx_rxlock);
+			return;
+		}
+
+		if (isr_status == 0) {
+			rsi_set_event(&common->tx_thread.event);
+			dev->rx_info.sdio_intr_status_zero++;
+			mutex_unlock(&common->tx_rxlock);
+			return;
+		}
+
+		rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n",
+			__func__, isr_status, (1 << MSDU_PKT_PENDING),
+			(1 << FW_ASSERT_IND));
+
+		do {
+			RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type);
+
+			switch (isr_type) {
+			case BUFFER_AVAILABLE:
+				dev->rx_info.watch_bufferfull_count = 0;
+				dev->rx_info.buffer_full = false;
+				dev->rx_info.mgmt_buffer_full = false;
+				rsi_ack_interrupt(common->priv,
+						  (1 << PKT_BUFF_AVAILABLE));
+				rsi_set_event((&common->tx_thread.event));
+				rsi_dbg(ISR_ZONE,
+					"%s: ==> BUFFER_AVILABLE <==\n",
+					__func__);
+				dev->rx_info.buf_avilable_counter++;
+				break;
+
+			case FIRMWARE_ASSERT_IND:
+				rsi_dbg(ERR_ZONE,
+					"%s: ==> FIRMWARE Assert <==\n",
+					__func__);
+				status = rsi_read_register(common->priv,
+							SDIO_FW_STATUS_REG,
+							&fw_status);
+				if (status) {
+					rsi_dbg(ERR_ZONE,
+						"%s: Failed to read f/w reg\n",
+						__func__);
+				} else {
+					rsi_dbg(ERR_ZONE,
+						"%s: Firmware Status is 0x%x\n",
+						__func__ , fw_status);
+					rsi_ack_interrupt(common->priv,
+							  (1 << FW_ASSERT_IND));
+				}
+
+				common->fsm_state = FSM_CARD_NOT_READY;
+				break;
+
+			case MSDU_PACKET_PENDING:
+				rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
+				dev->rx_info.total_sdio_msdu_pending_intr++;
+
+				status = rsi_process_pkt(common);
+				if (status) {
+					rsi_dbg(ERR_ZONE,
+						"%s: Failed to read pkt\n",
+						__func__);
+					mutex_unlock(&common->tx_rxlock);
+					return;
+				}
+				break;
+			default:
+				rsi_ack_interrupt(common->priv,
+						  isr_status);
+				dev->rx_info.total_sdio_unknown_intr++;
+				isr_status = 0;
+				rsi_dbg(ISR_ZONE,
+					"Unknown Interrupt %x\n",
+					isr_status);
+				break;
+			}
+			isr_status ^= BIT(isr_type - 1);
+		} while (isr_status);
+		mutex_unlock(&common->tx_rxlock);
+	} while (1);
+}
+
+/**
+ * rsi_device_init() - This Function Initializes The HAL.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_device_init(struct rsi_common *common)
+{
+	if (rsi_load_ta_instructions(common))
+		return -1;
+
+	if (rsi_sdio_master_access_msword(common->priv, MISC_CFG_BASE_ADDR)) {
+		rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n",
+			__func__);
+		return -1;
+	}
+	rsi_dbg(INIT_ZONE,
+		"%s: Setting ms word to 0x41050000\n", __func__);
+
+	return 0;
+}
+
+/**
+ * rsi_read_buffer_status_register() - This function is used to the read buffer
+ *				       status register and set relevant fields
+ *				       in rsi_91x_sdiodev struct.
+ * @adapter: Pointer to the driver hw structure.
+ * @q_num: The Q number whose status is to be found.
+ *
+ * Return: status: -1 on failure or else queue full/stop is indicated.
+ */
+int rsi_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num)
+{
+	struct rsi_common *common = adapter->priv;
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+	u8 buf_status = 0;
+	int status = 0;
+
+	status = rsi_read_register(common->priv,
+				   RSI_DEVICE_BUFFER_STATUS_REGISTER,
+				   &buf_status);
+
+	if (status) {
+		rsi_dbg(ERR_ZONE,
+			"%s: Failed to read status register\n", __func__);
+		return -1;
+	}
+
+	if (buf_status & (BIT(PKT_MGMT_BUFF_FULL))) {
+		if (!dev->rx_info.mgmt_buffer_full)
+			dev->rx_info.mgmt_buf_full_counter++;
+		dev->rx_info.mgmt_buffer_full = true;
+	} else {
+		dev->rx_info.mgmt_buffer_full = false;
+	}
+
+	if (buf_status & (BIT(PKT_BUFF_FULL))) {
+		if (!dev->rx_info.buffer_full)
+			dev->rx_info.buf_full_counter++;
+		dev->rx_info.buffer_full = true;
+	} else {
+		dev->rx_info.buffer_full = false;
+	}
+
+	if (buf_status & (BIT(PKT_BUFF_SEMI_FULL))) {
+		if (!dev->rx_info.semi_buffer_full)
+			dev->rx_info.buf_semi_full_counter++;
+		dev->rx_info.semi_buffer_full = true;
+	} else {
+		dev->rx_info.semi_buffer_full = false;
+	}
+
+	if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full))
+		return QUEUE_FULL;
+
+	if (dev->rx_info.buffer_full)
+		return QUEUE_FULL;
+
+	return QUEUE_NOT_FULL;
+}
+
+/**
+ * rsi_determine_event_timeout() - This Function determines the event
+ *				   timeout duration.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: timeout duration is returned.
+ */
+int rsi_determine_event_timeout(struct rsi_hw *adapter)
+{
+	struct rsi_91x_sdiodev *dev =
+		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
+
+	/* Once buffer full is seen, event timeout to occur every 2 msecs */
+	if (dev->rx_info.buffer_full)
+		return 2;
+
+	return EVENT_WAIT_FOREVER;
+}
-- 
1.7.5.4