Return-path: Received: from mail.redpinesignals.com ([203.196.161.92]:51080 "EHLO mail.redpinesignals.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752952AbaCCI2E (ORCPT ); Mon, 3 Mar 2014 03:28:04 -0500 Received: from [192.168.40.2] ([192.168.40.2]) (authenticated user fariya.f@redpinesignals.com) by mail.redpinesignals.com for linux-wireless@vger.kernel.org; Mon, 3 Mar 2014 13:58:01 +0530 Message-ID: <53143CBB.7040509@redpinesignals.com> (sfid-20140303_092809_952616_0E9D23CF) Date: Mon, 03 Mar 2014 13:56:35 +0530 From: Fariya Fatima MIME-Version: 1.0 To: linux-wireless@vger.kernel.org Subject: [PATCH 3.14.0-rc5 v3 10/10] rsi: Remaining SDIO functionality Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Fariya Fatima This patch adds the functions required by the rsi_sdio module. Signed-off-by: Fariya Fatima --- rsi_91x_sdio_ops.c | 563 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 563 insertions(+) diff -rupN linux-3.14-rc5/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c linux-3.14-rc5_new/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c --- linux-3.14-rc5/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c 1970-01-01 05:30:00.000000000 +0530 +++ linux-3.14-rc5_new/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c 2014-03-04 07:38:11.672600052 +0545 @@ -0,0 +1,563 @@ +/** + * Copyright (c) 2014 Redpine Signals Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include "rsi_sdio.h" +#include "rsi_common.h" + +/** + * This function sets the AHB master access MS word in the SDIO slave registers. + * + * @param adapter Pointer to the adapter structure. + * @param ms_word ms word need to be initialized. + * @return status: 0 on success, -1 on failure. + */ +static int rsi_sdio_master_access_msword(struct rsi_hw *adapter, + u16 ms_word) +{ + u8 byte; + u8 function = 0; + int status = 0; + + byte = (u8)(ms_word & 0x00FF); + + rsi_dbg(INIT_ZONE, + "%s: MASTER_ACCESS_MSBYTE:0x%x\n", __func__, byte); + + status = rsi_write_register(adapter, + function, + SDIO_MASTER_ACCESS_MSBYTE, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: fail to access MASTER_ACCESS_MSBYTE\n", + __func__); + return -1; + } + + byte = (u8)(ms_word >> 8); + + rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte); + status = rsi_write_register(adapter, + function, + SDIO_MASTER_ACCESS_LSBYTE, + &byte); + return status; +} + +/** + * This function includes the actual funtionality of copying the TA firmware to the card. + * Basically this function includes opening the TA file,reading the TA file and + * writing their values in blocks of data. + * + * @param common Pointer to the driver private structure. + * @param fw Pointer to the firmware value to be written. + * @param len length of firmware file. + * @param num_blocks Number of blocks to be written to the card. + * @return 0 on success and -1 on failure. + */ +static int rsi_copy_to_card(struct rsi_common *common, + const u8 *fw, + u32 len, + u32 num_blocks) +{ + struct rsi_hw *adapter = common->priv; + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u32 indx, ii; + u32 block_size = dev->tx_blk_size; + u32 lsb_address; + __le32 data[] = { TA_HOLD_THREAD_VALUE, TA_SOFT_RST_CLR, + TA_PC_ZERO, TA_RELEASE_THREAD_VALUE }; + u32 address[] = { TA_HOLD_THREAD_REG, TA_SOFT_RESET_REG, + TA_TH0_PC_REG, TA_RELEASE_THREAD_REG }; + u32 base_address; + u16 msb_address; + + base_address = TA_LOAD_ADDRESS; + msb_address = base_address >> 16; + + for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) { + lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER); + if (rsi_write_register_multiple(adapter, + lsb_address, + (u8 *)(fw + indx), + block_size)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to load %s blk\n", __func__, + FIRMWARE_RSI9113); + return -1; + } + rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii); + base_address += block_size; + if ((base_address >> 16) != msb_address) { + msb_address += 1; + if (rsi_sdio_master_access_msword(adapter, + msb_address)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to set ms word reg\n", + __func__); + return -1; + } + } + } + + if (len % block_size) { + lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER); + if (rsi_write_register_multiple(adapter, + lsb_address, + (u8 *)(fw + indx), + len % block_size)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to load f/w\n", __func__); + return -1; + } + } + rsi_dbg(INIT_ZONE, + "%s: Succesfully loaded TA instructions\n", __func__); + + if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to set ms word to common reg\n", + __func__); + return -1; + } + + for (ii = 0; ii < ARRAY_SIZE(data); ii++) { + /* Bringing TA out of reset */ + if (rsi_write_register_multiple(adapter, + (address[ii] | + RSI_SD_REQUEST_MASTER), + (u8 *)&data[ii], + 4)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to hold TA threads\n", __func__); + return -1; + } + } + + rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__); + return 0; +} + +/** + * This function includes the actual funtionality of loading the TA firmware. + * This function also includes opening the TA file,reading the TA file and + * writing their values in blocks of data. + * + * @param common Pointer to the driver private structure. + * @param fw_status Firmware status. + * @return status: 0 on success, -1 on failure. + */ +static int rsi_load_ta_instructions(struct rsi_common *common) +{ + struct rsi_hw *adapter = common->priv; + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u32 len; + u32 num_blocks; + const u8 *fw; + const struct firmware *fw_entry = NULL; + u32 block_size = dev->tx_blk_size; + int status = 0; + u32 base_address; + u16 msb_address; + + if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to set ms word to common reg\n", + __func__); + return -1; + } + base_address = TA_LOAD_ADDRESS; + msb_address = (base_address >> 16); + + if (rsi_sdio_master_access_msword(adapter, msb_address)) { + rsi_dbg(ERR_ZONE, + "%s: Unable to set ms word reg\n", __func__); + return -1; + } + + status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device); + if (status < 0) { + rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n", + __func__, FIRMWARE_RSI9113); + return status; + } + + fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL); + len = fw_entry->size; + + if (len % 4) + len += (4 - (len % 4)); + + num_blocks = (len / block_size); + + rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len); + rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks); + + status = rsi_copy_to_card(common, fw, len, num_blocks); + release_firmware(fw_entry); + return status; +} + +/** + * This Function reads rx_blocks register and figures out the size of the rx + * pkt + + * @param common Pointer to the driver private structure. + * @return 0 on success, -1 on failure. + */ +static int rsi_process_pkt(struct rsi_common *common) +{ + struct rsi_hw *adapter = common->priv; + u8 num_blks = 0; + u32 rcv_pkt_len = 0; + int status = 0; + + status = rsi_read_register(adapter, + SDIO_RX_NUM_BLOCKS_REG, + &num_blks); + + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to read pkt length from the card:\n", + __func__); + return status; + } + rcv_pkt_len = (num_blks * 256); + + common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL); + if (!common->rx_data_pkt) { + rsi_dbg(ERR_ZONE, "%s: Failed in memory allocation\n", + __func__); + return -1; + } + + status = rsi_host_intf_read_pkt(adapter, + common->rx_data_pkt, + rcv_pkt_len); + if (status) { + rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n", + __func__); + goto fail; + } + + status = rsi_read_pkt(common, rcv_pkt_len); + kfree(common->rx_data_pkt); + return status; + +fail: + kfree(common->rx_data_pkt); + return -1; +} + +/** + * This function does the actual initialization of SDBUS slave registers. + * + * @param adapter Pointer to the adapter structure. + * @return status: 0 on success, -1 on failure. + */ +int rsi_init_sdio_slave_regs(struct rsi_hw *adapter) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u8 function = 0; + u8 byte; + int status = 0; + + if (dev->next_read_delay) { + byte = dev->next_read_delay; + status = rsi_write_register(adapter, + function, + SDIO_NXT_RD_DELAY2, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to write SDIO_NXT_RD_DELAY2\n", + __func__); + return -1; + } + } + + if (dev->sdio_high_speed_enable) { + rsi_dbg(INIT_ZONE, "%s: Enabling SDIO High speed\n", __func__); + byte = 0x3; + + status = rsi_write_register(adapter, + function, + SDIO_REG_HIGH_SPEED, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to enable SDIO high speed\n", + __func__); + return -1; + } + } + + /* This tells SDIO FIFO when to start read to host */ + rsi_dbg(INIT_ZONE, "%s: Initialzing SDIO read start level\n", __func__); + byte = 0x24; + + status = rsi_write_register(adapter, + function, + SDIO_READ_START_LVL, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to write SDIO_READ_START_LVL\n", __func__); + return -1; + } + + rsi_dbg(INIT_ZONE, "%s: Initialzing FIFO ctrl registers\n", __func__); + byte = (128 - 32); + + status = rsi_write_register(adapter, + function, + SDIO_READ_FIFO_CTL, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to write SDIO_READ_FIFO_CTL\n", __func__); + return -1; + } + + byte = 32; + status = rsi_write_register(adapter, + function, + SDIO_WRITE_FIFO_CTL, + &byte); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to write SDIO_WRITE_FIFO_CTL\n", __func__); + return -1; + } + + return 0; +} + +/** + * This function read and process the SDIO interrupts. + * + * @param common Pointer to the driver private structure. + * @return None. + */ +void rsi_interrupt_handler(struct rsi_hw *adapter) +{ + struct rsi_common *common = adapter->priv; + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + int status; + enum SDIO_INTERRUPT_TYPE isr_type; + u8 isr_status = 0; + u8 fw_status = 0; + + dev->rx_info.sdio_int_counter++; + + do { + mutex_lock(&common->tx_rxlock); + status = rsi_read_register(common->priv, + RSI_FN1_INT_REGISTER, + &isr_status); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to Read Intr Status Register\n", + __func__); + mutex_unlock(&common->tx_rxlock); + return; + } + + if (isr_status == 0) { + rsi_set_event(&common->tx_thread.event); + dev->rx_info.sdio_intr_status_zero++; + mutex_unlock(&common->tx_rxlock); + return; + } + + rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n", + __func__, isr_status, (1 << MSDU_PKT_PENDING), + (1 << FW_ASSERT_IND)); + + do { + RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type); + + switch (isr_type) { + case BUFFER_AVAILABLE: + dev->rx_info.watch_bufferfull_count = 0; + dev->rx_info.buffer_full = false; + dev->rx_info.mgmt_buffer_full = false; + rsi_ack_interrupt(common->priv, + (1 << PKT_BUFF_AVAILABLE)); + rsi_set_event((&common->tx_thread.event)); + rsi_dbg(ISR_ZONE, + "%s: ==> BUFFER_AVILABLE <==\n", + __func__); + dev->rx_info.buf_avilable_counter++; + break; + + case FIRMWARE_ASSERT_IND: + rsi_dbg(ERR_ZONE, + "%s: ==> FIRMWARE Assert <==\n", + __func__); + status = rsi_read_register(common->priv, + SDIO_FW_STATUS_REG, + &fw_status); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to read f/w reg\n", + __func__); + } else { + rsi_dbg(ERR_ZONE, + "%s: Firmware Status is 0x%x\n", + __func__ , fw_status); + rsi_ack_interrupt(common->priv, + (1 << FW_ASSERT_IND)); + } + + common->fsm_state = FSM_CARD_NOT_READY; + break; + + case MSDU_PACKET_PENDING: + rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n"); + dev->rx_info.total_sdio_msdu_pending_intr++; + + status = rsi_process_pkt(common); + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to read pkt\n", + __func__); + mutex_unlock(&common->tx_rxlock); + return; + } + break; + default: + rsi_ack_interrupt(common->priv, + isr_status); + dev->rx_info.total_sdio_unknown_intr++; + isr_status = 0; + rsi_dbg(ISR_ZONE, + "Unknown Interrupt %x\n", + isr_status); + break; + } + isr_status ^= BIT(isr_type - 1); + } while (isr_status); + mutex_unlock(&common->tx_rxlock); + } while (1); + return; +} + +/** + * This Function Initializes The HAL. + * + * @param common Pointer to the driver private structure. + * @param fw_status Firmware status. + * @return 0 on success, -1 on failure. + */ +int rsi_device_init(struct rsi_common *common) +{ + if (rsi_load_ta_instructions(common)) + return -1; + + if (rsi_sdio_master_access_msword(common->priv, MISC_CFG_BASE_ADDR)) { + rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n", + __func__); + return -1; + } + rsi_dbg(INIT_ZONE, + "%s: Setting ms word to 0x41050000\n", __func__); + + return 0; +} + +/** + * This function is used to the read buffer status register and set + * relevant fields in rsi_91x_sdiodev struct. + * + * @param adapter Pointer to the driver hw structure. + * @param q_num The Q number whose status is to be found. + * @return status: -1 on failure or else queue full/stop is indicated. + */ +int rsi_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num) +{ + struct rsi_common *common = adapter->priv; + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + u8 buf_status = 0; + int status = 0; + + status = rsi_read_register(common->priv, + RSI_DEVICE_BUFFER_STATUS_REGISTER, + &buf_status); + + if (status) { + rsi_dbg(ERR_ZONE, + "%s: Failed to read status register\n", __func__); + return -1; + } + + if (buf_status & (BIT(PKT_MGMT_BUFF_FULL))) { + if (!dev->rx_info.mgmt_buffer_full) + dev->rx_info.mgmt_buf_full_counter++; + dev->rx_info.mgmt_buffer_full = true; + } else { + dev->rx_info.mgmt_buffer_full = false; + } + + if (buf_status & (BIT(PKT_BUFF_FULL))) { + if (!dev->rx_info.buffer_full) + dev->rx_info.buf_full_counter++; + dev->rx_info.buffer_full = true; + } else { + dev->rx_info.buffer_full = false; + } + + if (buf_status & (BIT(PKT_BUFF_SEMI_FULL))) { + if (!dev->rx_info.semi_buffer_full) + dev->rx_info.buf_semi_full_counter++; + dev->rx_info.semi_buffer_full = true; + } else { + dev->rx_info.semi_buffer_full = false; + } + + if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full)) + return QUEUE_FULL; + + if (dev->rx_info.buffer_full) + return QUEUE_FULL; + + return QUEUE_NOT_FULL; +} + +/** + * This Function determines the event timeout duration + * + * @param common Pointer to the driver private structure. + * @return timeout duration is returned. + */ +int rsi_determine_event_timeout(struct rsi_hw *adapter) +{ + struct rsi_91x_sdiodev *dev = + (struct rsi_91x_sdiodev *)adapter->rsi_dev; + + /* Once buffer full is seen, event timeout to occur every 2 msecs */ + if (dev->rx_info.buffer_full) + return 2; + + return EVENT_WAIT_FOREVER; +}