Return-path: Received: from mx1.redhat.com ([209.132.183.28]:12665 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751611AbaEZHtR (ORCPT ); Mon, 26 May 2014 03:49:17 -0400 From: Hans de Goede To: Linus Walleij , Chris Ball , Ulf Hansson , Arend van Spriel , "John W. Linville" , Maxime Ripard Cc: Chen-Yu Tsai , linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org, linux-wireless@vger.kernel.org, devicetree , linux-sunxi@googlegroups.com, Hans de Goede Subject: [PATCH 07/11] dt: bindings: add bindings for Broadcom bcm43xx sdio devices Date: Mon, 26 May 2014 09:48:02 +0200 Message-Id: <1401090486-4414-8-git-send-email-hdegoede@redhat.com> (sfid-20140526_095039_758539_78F4F92E) In-Reply-To: <1401090486-4414-1-git-send-email-hdegoede@redhat.com> References: <1401090486-4414-1-git-send-email-hdegoede@redhat.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Arend van Spriel The Broadcom bcm43xx sdio devices are fullmac devices that may be integrated in ARM platforms. Currently, the brcmfmac driver for these devices support use of platform data. This patch specifies the bindings that allow this platform data to be expressed in the devicetree. Reviewed-by: Hante Meuleman Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Daniel (Deognyoun) Kim Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel [hdegoede@redhat.com: drop clk / reg_on gpio handling, as there is no consensus on how to handle this yet] [hdegoede@redhat.com: move from bindings/staging to bindings] Signed-off-by: Hans de Goede --- .../bindings/net/wireless/brcm,bcm43xx-fmac.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt new file mode 100644 index 0000000..6a0aaf2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -0,0 +1,29 @@ +Broadcom BCM43xx Fullmac wireless SDIO devices + +This node provides properties for controlling the Broadcom wireless device. The +node is expected to be specified as a child node to the SDIO controller that +connects the device to the system. + +Required properties: + + - compatible : Should be "brcm,bcm43xx-fmac". + +Optional properties: + - brcm,drive-strength : drive strength used for SDIO pins on device. + (default = 6mA). + - interrupt-parent : the phandle for the interrupt controller to which the + device interrupts are connected. + - interrupts : specifies attributes for the out-of-band interrupt (host-wake). + When not specified the device will use in-band SDIO interrupts. + - interrupt-names : name of the out-of-band interrupt, which must be set + to "host-wake". + +Example: + +bcm4335 { + compatible = "brcm,bcm43xx-fmac"; + brcm,drive-strength = <4>; + interrupt-parent = <&gpx2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; +}; -- 1.9.3