Return-path: Received: from charlotte.tuxdriver.com ([70.61.120.58]:33389 "EHLO smtp.tuxdriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932413AbaE3PAQ (ORCPT ); Fri, 30 May 2014 11:00:16 -0400 From: "John W. Linville" To: linux-wireless@vger.kernel.org Cc: Johannes Berg , Stefano Brivio , Mattias Nissler , "John W. Linville" Subject: [PATCH] mac80211: remove PID rate control Date: Fri, 30 May 2014 10:47:28 -0400 Message-Id: <1401461248-29427-1-git-send-email-linville@tuxdriver.com> (sfid-20140530_170022_501559_C48F8145) Sender: linux-wireless-owner@vger.kernel.org List-ID: Minstrel has long since proven its worth. Signed-off-by: John W. Linville --- MAINTAINERS | 10 - net/mac80211/Kconfig | 17 -- net/mac80211/Makefile | 5 - net/mac80211/main.c | 7 - net/mac80211/rate.h | 13 - net/mac80211/rc80211_pid.h | 278 --------------------- net/mac80211/rc80211_pid_algo.c | 478 ------------------------------------- net/mac80211/rc80211_pid_debugfs.c | 228 ------------------ 8 files changed, 1036 deletions(-) delete mode 100644 net/mac80211/rc80211_pid.h delete mode 100644 net/mac80211/rc80211_pid_algo.c delete mode 100644 net/mac80211/rc80211_pid_debugfs.c diff --git a/MAINTAINERS b/MAINTAINERS index a80a586cbdcd..a6a39cba372d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5566,16 +5566,6 @@ F: Documentation/networking/mac80211-injection.txt F: include/net/mac80211.h F: net/mac80211/ -MAC80211 PID RATE CONTROL -M: Stefano Brivio -M: Mattias Nissler -L: linux-wireless@vger.kernel.org -W: http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/PID -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git -S: Maintained -F: net/mac80211/rc80211_pid* - MACVLAN DRIVER M: Patrick McHardy L: netdev@vger.kernel.org diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index 97b5dcad5025..aeb6a483b3bc 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -19,14 +19,6 @@ if MAC80211 != n config MAC80211_HAS_RC bool -config MAC80211_RC_PID - bool "PID controller based rate control algorithm" if EXPERT - select MAC80211_HAS_RC - ---help--- - This option enables a TX rate control algorithm for - mac80211 that uses a PID controller to select the TX - rate. - config MAC80211_RC_MINSTREL bool "Minstrel" if EXPERT select MAC80211_HAS_RC @@ -51,14 +43,6 @@ choice overridden through the ieee80211_default_rc_algo module parameter if different algorithms are available. -config MAC80211_RC_DEFAULT_PID - bool "PID controller based rate control algorithm" - depends on MAC80211_RC_PID - ---help--- - Select the PID controller based rate control as the - default rate control algorithm. You should choose - this unless you know what you are doing. - config MAC80211_RC_DEFAULT_MINSTREL bool "Minstrel" depends on MAC80211_RC_MINSTREL @@ -72,7 +56,6 @@ config MAC80211_RC_DEFAULT string default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL && MAC80211_RC_MINSTREL_HT default "minstrel" if MAC80211_RC_DEFAULT_MINSTREL - default "pid" if MAC80211_RC_DEFAULT_PID default "" endif diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile index 1e46ffa69167..4409bf506594 100644 --- a/net/mac80211/Makefile +++ b/net/mac80211/Makefile @@ -47,17 +47,12 @@ mac80211-$(CONFIG_PM) += pm.o CFLAGS_trace.o := -I$(src) -# objects for PID algorithm -rc80211_pid-y := rc80211_pid_algo.o -rc80211_pid-$(CONFIG_MAC80211_DEBUGFS) += rc80211_pid_debugfs.o - rc80211_minstrel-y := rc80211_minstrel.o rc80211_minstrel-$(CONFIG_MAC80211_DEBUGFS) += rc80211_minstrel_debugfs.o rc80211_minstrel_ht-y := rc80211_minstrel_ht.o rc80211_minstrel_ht-$(CONFIG_MAC80211_DEBUGFS) += rc80211_minstrel_ht_debugfs.o -mac80211-$(CONFIG_MAC80211_RC_PID) += $(rc80211_pid-y) mac80211-$(CONFIG_MAC80211_RC_MINSTREL) += $(rc80211_minstrel-y) mac80211-$(CONFIG_MAC80211_RC_MINSTREL_HT) += $(rc80211_minstrel_ht-y) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index d17c26d6e369..0512a5096f0f 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1187,18 +1187,12 @@ static int __init ieee80211_init(void) if (ret) goto err_minstrel; - ret = rc80211_pid_init(); - if (ret) - goto err_pid; - ret = ieee80211_iface_init(); if (ret) goto err_netdev; return 0; err_netdev: - rc80211_pid_exit(); - err_pid: rc80211_minstrel_ht_exit(); err_minstrel: rc80211_minstrel_exit(); @@ -1208,7 +1202,6 @@ static int __init ieee80211_init(void) static void __exit ieee80211_exit(void) { - rc80211_pid_exit(); rc80211_minstrel_ht_exit(); rc80211_minstrel_exit(); diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h index 9aa2a1190a86..18babe302832 100644 --- a/net/mac80211/rate.h +++ b/net/mac80211/rate.h @@ -143,19 +143,6 @@ void rate_control_deinitialize(struct ieee80211_local *local); /* Rate control algorithms */ -#ifdef CONFIG_MAC80211_RC_PID -int rc80211_pid_init(void); -void rc80211_pid_exit(void); -#else -static inline int rc80211_pid_init(void) -{ - return 0; -} -static inline void rc80211_pid_exit(void) -{ -} -#endif - #ifdef CONFIG_MAC80211_RC_MINSTREL int rc80211_minstrel_init(void); void rc80211_minstrel_exit(void); diff --git a/net/mac80211/rc80211_pid.h b/net/mac80211/rc80211_pid.h deleted file mode 100644 index 19111c7bf454..000000000000 --- a/net/mac80211/rc80211_pid.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - * Copyright 2007, Mattias Nissler - * Copyright 2007, Stefano Brivio - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef RC80211_PID_H -#define RC80211_PID_H - -/* Sampling period for measuring percentage of failed frames in ms. */ -#define RC_PID_INTERVAL 125 - -/* Exponential averaging smoothness (used for I part of PID controller) */ -#define RC_PID_SMOOTHING_SHIFT 3 -#define RC_PID_SMOOTHING (1 << RC_PID_SMOOTHING_SHIFT) - -/* Sharpening factor (used for D part of PID controller) */ -#define RC_PID_SHARPENING_FACTOR 0 -#define RC_PID_SHARPENING_DURATION 0 - -/* Fixed point arithmetic shifting amount. */ -#define RC_PID_ARITH_SHIFT 8 - -/* Proportional PID component coefficient. */ -#define RC_PID_COEFF_P 15 -/* Integral PID component coefficient. */ -#define RC_PID_COEFF_I 9 -/* Derivative PID component coefficient. */ -#define RC_PID_COEFF_D 15 - -/* Target failed frames rate for the PID controller. NB: This effectively gives - * maximum failed frames percentage we're willing to accept. If the wireless - * link quality is good, the controller will fail to adjust failed frames - * percentage to the target. This is intentional. - */ -#define RC_PID_TARGET_PF 14 - -/* Rate behaviour normalization quantity over time. */ -#define RC_PID_NORM_OFFSET 3 - -/* Push high rates right after loading. */ -#define RC_PID_FAST_START 0 - -/* Arithmetic right shift for positive and negative values for ISO C. */ -#define RC_PID_DO_ARITH_RIGHT_SHIFT(x, y) \ - ((x) < 0 ? -((-(x)) >> (y)) : (x) >> (y)) - -enum rc_pid_event_type { - RC_PID_EVENT_TYPE_TX_STATUS, - RC_PID_EVENT_TYPE_RATE_CHANGE, - RC_PID_EVENT_TYPE_TX_RATE, - RC_PID_EVENT_TYPE_PF_SAMPLE, -}; - -union rc_pid_event_data { - /* RC_PID_EVENT_TX_STATUS */ - struct { - u32 flags; - struct ieee80211_tx_info tx_status; - }; - /* RC_PID_EVENT_TYPE_RATE_CHANGE */ - /* RC_PID_EVENT_TYPE_TX_RATE */ - struct { - int index; - int rate; - }; - /* RC_PID_EVENT_TYPE_PF_SAMPLE */ - struct { - s32 pf_sample; - s32 prop_err; - s32 int_err; - s32 der_err; - }; -}; - -struct rc_pid_event { - /* The time when the event occurred */ - unsigned long timestamp; - - /* Event ID number */ - unsigned int id; - - /* Type of event */ - enum rc_pid_event_type type; - - /* type specific data */ - union rc_pid_event_data data; -}; - -/* Size of the event ring buffer. */ -#define RC_PID_EVENT_RING_SIZE 32 - -struct rc_pid_event_buffer { - /* Counter that generates event IDs */ - unsigned int ev_count; - - /* Ring buffer of events */ - struct rc_pid_event ring[RC_PID_EVENT_RING_SIZE]; - - /* Index to the entry in events_buf to be reused */ - unsigned int next_entry; - - /* Lock that guards against concurrent access to this buffer struct */ - spinlock_t lock; - - /* Wait queue for poll/select and blocking I/O */ - wait_queue_head_t waitqueue; -}; - -struct rc_pid_events_file_info { - /* The event buffer we read */ - struct rc_pid_event_buffer *events; - - /* The entry we have should read next */ - unsigned int next_entry; -}; - -/** - * struct rc_pid_debugfs_entries - tunable parameters - * - * Algorithm parameters, tunable via debugfs. - * @target: target percentage for failed frames - * @sampling_period: error sampling interval in milliseconds - * @coeff_p: absolute value of the proportional coefficient - * @coeff_i: absolute value of the integral coefficient - * @coeff_d: absolute value of the derivative coefficient - * @smoothing_shift: absolute value of the integral smoothing factor (i.e. - * amount of smoothing introduced by the exponential moving average) - * @sharpen_factor: absolute value of the derivative sharpening factor (i.e. - * amount of emphasis given to the derivative term after low activity - * events) - * @sharpen_duration: duration of the sharpening effect after the detected low - * activity event, relative to sampling_period - * @norm_offset: amount of normalization periodically performed on the learnt - * rate behaviour values (lower means we should trust more what we learnt - * about behaviour of rates, higher means we should trust more the natural - * ordering of rates) - */ -struct rc_pid_debugfs_entries { - struct dentry *target; - struct dentry *sampling_period; - struct dentry *coeff_p; - struct dentry *coeff_i; - struct dentry *coeff_d; - struct dentry *smoothing_shift; - struct dentry *sharpen_factor; - struct dentry *sharpen_duration; - struct dentry *norm_offset; -}; - -void rate_control_pid_event_tx_status(struct rc_pid_event_buffer *buf, - struct ieee80211_tx_info *stat); - -void rate_control_pid_event_rate_change(struct rc_pid_event_buffer *buf, - int index, int rate); - -void rate_control_pid_event_tx_rate(struct rc_pid_event_buffer *buf, - int index, int rate); - -void rate_control_pid_event_pf_sample(struct rc_pid_event_buffer *buf, - s32 pf_sample, s32 prop_err, - s32 int_err, s32 der_err); - -void rate_control_pid_add_sta_debugfs(void *priv, void *priv_sta, - struct dentry *dir); - -void rate_control_pid_remove_sta_debugfs(void *priv, void *priv_sta); - -struct rc_pid_sta_info { - unsigned long last_change; - unsigned long last_sample; - - u32 tx_num_failed; - u32 tx_num_xmit; - - int txrate_idx; - - /* Average failed frames percentage error (i.e. actual vs. target - * percentage), scaled by RC_PID_SMOOTHING. This value is computed - * using using an exponential weighted average technique: - * - * (RC_PID_SMOOTHING - 1) * err_avg_old + err - * err_avg = ------------------------------------------ - * RC_PID_SMOOTHING - * - * where err_avg is the new approximation, err_avg_old the previous one - * and err is the error w.r.t. to the current failed frames percentage - * sample. Note that the bigger RC_PID_SMOOTHING the more weight is - * given to the previous estimate, resulting in smoother behavior (i.e. - * corresponding to a longer integration window). - * - * For computation, we actually don't use the above formula, but this - * one: - * - * err_avg_scaled = err_avg_old_scaled - err_avg_old + err - * - * where: - * err_avg_scaled = err * RC_PID_SMOOTHING - * err_avg_old_scaled = err_avg_old * RC_PID_SMOOTHING - * - * This avoids floating point numbers and the per_failed_old value can - * easily be obtained by shifting per_failed_old_scaled right by - * RC_PID_SMOOTHING_SHIFT. - */ - s32 err_avg_sc; - - /* Last framed failes percentage sample. */ - u32 last_pf; - - /* Sharpening needed. */ - u8 sharp_cnt; - -#ifdef CONFIG_MAC80211_DEBUGFS - /* Event buffer */ - struct rc_pid_event_buffer events; - - /* Events debugfs file entry */ - struct dentry *events_entry; -#endif -}; - -/* Algorithm parameters. We keep them on a per-algorithm approach, so they can - * be tuned individually for each interface. - */ -struct rc_pid_rateinfo { - - /* Map sorted rates to rates in ieee80211_hw_mode. */ - int index; - - /* Map rates in ieee80211_hw_mode to sorted rates. */ - int rev_index; - - /* Did we do any measurement on this rate? */ - bool valid; - - /* Comparison with the lowest rate. */ - int diff; -}; - -struct rc_pid_info { - - /* The failed frames percentage target. */ - unsigned int target; - - /* Rate at which failed frames percentage is sampled in 0.001s. */ - unsigned int sampling_period; - - /* P, I and D coefficients. */ - int coeff_p; - int coeff_i; - int coeff_d; - - /* Exponential averaging shift. */ - unsigned int smoothing_shift; - - /* Sharpening factor and duration. */ - unsigned int sharpen_factor; - unsigned int sharpen_duration; - - /* Normalization offset. */ - unsigned int norm_offset; - - /* Rates information. */ - struct rc_pid_rateinfo *rinfo; - - /* Index of the last used rate. */ - int oldrate; - -#ifdef CONFIG_MAC80211_DEBUGFS - /* Debugfs entries created for the parameters above. */ - struct rc_pid_debugfs_entries dentries; -#endif -}; - -#endif /* RC80211_PID_H */ diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c deleted file mode 100644 index d0da2a70fe68..000000000000 --- a/net/mac80211/rc80211_pid_algo.c +++ /dev/null @@ -1,478 +0,0 @@ -/* - * Copyright 2002-2005, Instant802 Networks, Inc. - * Copyright 2005, Devicescape Software, Inc. - * Copyright 2007, Mattias Nissler - * Copyright 2007-2008, Stefano Brivio - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include "rate.h" -#include "mesh.h" -#include "rc80211_pid.h" - - -/* This is an implementation of a TX rate control algorithm that uses a PID - * controller. Given a target failed frames rate, the controller decides about - * TX rate changes to meet the target failed frames rate. - * - * The controller basically computes the following: - * - * adj = CP * err + CI * err_avg + CD * (err - last_err) * (1 + sharpening) - * - * where - * adj adjustment value that is used to switch TX rate (see below) - * err current error: target vs. current failed frames percentage - * last_err last error - * err_avg average (i.e. poor man's integral) of recent errors - * sharpening non-zero when fast response is needed (i.e. right after - * association or no frames sent for a long time), heading - * to zero over time - * CP Proportional coefficient - * CI Integral coefficient - * CD Derivative coefficient - * - * CP, CI, CD are subject to careful tuning. - * - * The integral component uses a exponential moving average approach instead of - * an actual sliding window. The advantage is that we don't need to keep an - * array of the last N error values and computation is easier. - * - * Once we have the adj value, we map it to a rate by means of a learning - * algorithm. This algorithm keeps the state of the percentual failed frames - * difference between rates. The behaviour of the lowest available rate is kept - * as a reference value, and every time we switch between two rates, we compute - * the difference between the failed frames each rate exhibited. By doing so, - * we compare behaviours which different rates exhibited in adjacent timeslices, - * thus the comparison is minimally affected by external conditions. This - * difference gets propagated to the whole set of measurements, so that the - * reference is always the same. Periodically, we normalize this set so that - * recent events weigh the most. By comparing the adj value with this set, we - * avoid pejorative switches to lower rates and allow for switches to higher - * rates if they behaved well. - * - * Note that for the computations we use a fixed-point representation to avoid - * floating point arithmetic. Hence, all values are shifted left by - * RC_PID_ARITH_SHIFT. - */ - - -/* Adjust the rate while ensuring that we won't switch to a lower rate if it - * exhibited a worse failed frames behaviour and we'll choose the highest rate - * whose failed frames behaviour is not worse than the one of the original rate - * target. While at it, check that the new rate is valid. */ -static void rate_control_pid_adjust_rate(struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, - struct rc_pid_sta_info *spinfo, int adj, - struct rc_pid_rateinfo *rinfo) -{ - int cur_sorted, new_sorted, probe, tmp, n_bitrates, band; - int cur = spinfo->txrate_idx; - - band = sband->band; - n_bitrates = sband->n_bitrates; - - /* Map passed arguments to sorted values. */ - cur_sorted = rinfo[cur].rev_index; - new_sorted = cur_sorted + adj; - - /* Check limits. */ - if (new_sorted < 0) - new_sorted = rinfo[0].rev_index; - else if (new_sorted >= n_bitrates) - new_sorted = rinfo[n_bitrates - 1].rev_index; - - tmp = new_sorted; - - if (adj < 0) { - /* Ensure that the rate decrease isn't disadvantageous. */ - for (probe = cur_sorted; probe >= new_sorted; probe--) - if (rinfo[probe].diff <= rinfo[cur_sorted].diff && - rate_supported(sta, band, rinfo[probe].index)) - tmp = probe; - } else { - /* Look for rate increase with zero (or below) cost. */ - for (probe = new_sorted + 1; probe < n_bitrates; probe++) - if (rinfo[probe].diff <= rinfo[new_sorted].diff && - rate_supported(sta, band, rinfo[probe].index)) - tmp = probe; - } - - /* Fit the rate found to the nearest supported rate. */ - do { - if (rate_supported(sta, band, rinfo[tmp].index)) { - spinfo->txrate_idx = rinfo[tmp].index; - break; - } - if (adj < 0) - tmp--; - else - tmp++; - } while (tmp < n_bitrates && tmp >= 0); - -#ifdef CONFIG_MAC80211_DEBUGFS - rate_control_pid_event_rate_change(&spinfo->events, - spinfo->txrate_idx, - sband->bitrates[spinfo->txrate_idx].bitrate); -#endif -} - -/* Normalize the failed frames per-rate differences. */ -static void rate_control_pid_normalize(struct rc_pid_info *pinfo, int l) -{ - int i, norm_offset = pinfo->norm_offset; - struct rc_pid_rateinfo *r = pinfo->rinfo; - - if (r[0].diff > norm_offset) - r[0].diff -= norm_offset; - else if (r[0].diff < -norm_offset) - r[0].diff += norm_offset; - for (i = 0; i < l - 1; i++) - if (r[i + 1].diff > r[i].diff + norm_offset) - r[i + 1].diff -= norm_offset; - else if (r[i + 1].diff <= r[i].diff) - r[i + 1].diff += norm_offset; -} - -static void rate_control_pid_sample(struct rc_pid_info *pinfo, - struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, - struct rc_pid_sta_info *spinfo) -{ - struct rc_pid_rateinfo *rinfo = pinfo->rinfo; - u32 pf; - s32 err_avg; - u32 err_prop; - u32 err_int; - u32 err_der; - int adj, i, j, tmp; - unsigned long period; - - /* In case nothing happened during the previous control interval, turn - * the sharpening factor on. */ - period = msecs_to_jiffies(pinfo->sampling_period); - if (jiffies - spinfo->last_sample > 2 * period) - spinfo->sharp_cnt = pinfo->sharpen_duration; - - spinfo->last_sample = jiffies; - - /* This should never happen, but in case, we assume the old sample is - * still a good measurement and copy it. */ - if (unlikely(spinfo->tx_num_xmit == 0)) - pf = spinfo->last_pf; - else - pf = spinfo->tx_num_failed * 100 / spinfo->tx_num_xmit; - - spinfo->tx_num_xmit = 0; - spinfo->tx_num_failed = 0; - - /* If we just switched rate, update the rate behaviour info. */ - if (pinfo->oldrate != spinfo->txrate_idx) { - - i = rinfo[pinfo->oldrate].rev_index; - j = rinfo[spinfo->txrate_idx].rev_index; - - tmp = (pf - spinfo->last_pf); - tmp = RC_PID_DO_ARITH_RIGHT_SHIFT(tmp, RC_PID_ARITH_SHIFT); - - rinfo[j].diff = rinfo[i].diff + tmp; - pinfo->oldrate = spinfo->txrate_idx; - } - rate_control_pid_normalize(pinfo, sband->n_bitrates); - - /* Compute the proportional, integral and derivative errors. */ - err_prop = (pinfo->target - pf) << RC_PID_ARITH_SHIFT; - - err_avg = spinfo->err_avg_sc >> pinfo->smoothing_shift; - spinfo->err_avg_sc = spinfo->err_avg_sc - err_avg + err_prop; - err_int = spinfo->err_avg_sc >> pinfo->smoothing_shift; - - err_der = (pf - spinfo->last_pf) * - (1 + pinfo->sharpen_factor * spinfo->sharp_cnt); - spinfo->last_pf = pf; - if (spinfo->sharp_cnt) - spinfo->sharp_cnt--; - -#ifdef CONFIG_MAC80211_DEBUGFS - rate_control_pid_event_pf_sample(&spinfo->events, pf, err_prop, err_int, - err_der); -#endif - - /* Compute the controller output. */ - adj = (err_prop * pinfo->coeff_p + err_int * pinfo->coeff_i - + err_der * pinfo->coeff_d); - adj = RC_PID_DO_ARITH_RIGHT_SHIFT(adj, 2 * RC_PID_ARITH_SHIFT); - - /* Change rate. */ - if (adj) - rate_control_pid_adjust_rate(sband, sta, spinfo, adj, rinfo); -} - -static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb) -{ - struct rc_pid_info *pinfo = priv; - struct rc_pid_sta_info *spinfo = priv_sta; - unsigned long period; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - - if (!spinfo) - return; - - /* Ignore all frames that were sent with a different rate than the rate - * we currently advise mac80211 to use. */ - if (info->status.rates[0].idx != spinfo->txrate_idx) - return; - - spinfo->tx_num_xmit++; - -#ifdef CONFIG_MAC80211_DEBUGFS - rate_control_pid_event_tx_status(&spinfo->events, info); -#endif - - /* We count frames that totally failed to be transmitted as two bad - * frames, those that made it out but had some retries as one good and - * one bad frame. */ - if (!(info->flags & IEEE80211_TX_STAT_ACK)) { - spinfo->tx_num_failed += 2; - spinfo->tx_num_xmit++; - } else if (info->status.rates[0].count > 1) { - spinfo->tx_num_failed++; - spinfo->tx_num_xmit++; - } - - /* Update PID controller state. */ - period = msecs_to_jiffies(pinfo->sampling_period); - if (time_after(jiffies, spinfo->last_sample + period)) - rate_control_pid_sample(pinfo, sband, sta, spinfo); -} - -static void -rate_control_pid_get_rate(void *priv, struct ieee80211_sta *sta, - void *priv_sta, - struct ieee80211_tx_rate_control *txrc) -{ - struct sk_buff *skb = txrc->skb; - struct ieee80211_supported_band *sband = txrc->sband; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct rc_pid_sta_info *spinfo = priv_sta; - int rateidx; - - if (txrc->rts) - info->control.rates[0].count = - txrc->hw->conf.long_frame_max_tx_count; - else - info->control.rates[0].count = - txrc->hw->conf.short_frame_max_tx_count; - - /* Send management frames and NO_ACK data using lowest rate. */ - if (rate_control_send_low(sta, priv_sta, txrc)) - return; - - rateidx = spinfo->txrate_idx; - - if (rateidx >= sband->n_bitrates) - rateidx = sband->n_bitrates - 1; - - info->control.rates[0].idx = rateidx; - -#ifdef CONFIG_MAC80211_DEBUGFS - rate_control_pid_event_tx_rate(&spinfo->events, - rateidx, sband->bitrates[rateidx].bitrate); -#endif -} - -static void -rate_control_pid_rate_init(void *priv, struct ieee80211_supported_band *sband, - struct cfg80211_chan_def *chandef, - struct ieee80211_sta *sta, void *priv_sta) -{ - struct rc_pid_sta_info *spinfo = priv_sta; - struct rc_pid_info *pinfo = priv; - struct rc_pid_rateinfo *rinfo = pinfo->rinfo; - int i, j, tmp; - bool s; - - /* TODO: This routine should consider using RSSI from previous packets - * as we need to have IEEE 802.1X auth succeed immediately after assoc.. - * Until that method is implemented, we will use the lowest supported - * rate as a workaround. */ - - /* Sort the rates. This is optimized for the most common case (i.e. - * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed - * mapping too. */ - for (i = 0; i < sband->n_bitrates; i++) { - rinfo[i].index = i; - rinfo[i].rev_index = i; - if (RC_PID_FAST_START) - rinfo[i].diff = 0; - else - rinfo[i].diff = i * pinfo->norm_offset; - } - for (i = 1; i < sband->n_bitrates; i++) { - s = false; - for (j = 0; j < sband->n_bitrates - i; j++) - if (unlikely(sband->bitrates[rinfo[j].index].bitrate > - sband->bitrates[rinfo[j + 1].index].bitrate)) { - tmp = rinfo[j].index; - rinfo[j].index = rinfo[j + 1].index; - rinfo[j + 1].index = tmp; - rinfo[rinfo[j].index].rev_index = j; - rinfo[rinfo[j + 1].index].rev_index = j + 1; - s = true; - } - if (!s) - break; - } - - spinfo->txrate_idx = rate_lowest_index(sband, sta); -} - -static void *rate_control_pid_alloc(struct ieee80211_hw *hw, - struct dentry *debugfsdir) -{ - struct rc_pid_info *pinfo; - struct rc_pid_rateinfo *rinfo; - struct ieee80211_supported_band *sband; - int i, max_rates = 0; -#ifdef CONFIG_MAC80211_DEBUGFS - struct rc_pid_debugfs_entries *de; -#endif - - pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC); - if (!pinfo) - return NULL; - - for (i = 0; i < IEEE80211_NUM_BANDS; i++) { - sband = hw->wiphy->bands[i]; - if (sband && sband->n_bitrates > max_rates) - max_rates = sband->n_bitrates; - } - - rinfo = kmalloc(sizeof(*rinfo) * max_rates, GFP_ATOMIC); - if (!rinfo) { - kfree(pinfo); - return NULL; - } - - pinfo->target = RC_PID_TARGET_PF; - pinfo->sampling_period = RC_PID_INTERVAL; - pinfo->coeff_p = RC_PID_COEFF_P; - pinfo->coeff_i = RC_PID_COEFF_I; - pinfo->coeff_d = RC_PID_COEFF_D; - pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT; - pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR; - pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION; - pinfo->norm_offset = RC_PID_NORM_OFFSET; - pinfo->rinfo = rinfo; - pinfo->oldrate = 0; - -#ifdef CONFIG_MAC80211_DEBUGFS - de = &pinfo->dentries; - de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR, - debugfsdir, &pinfo->target); - de->sampling_period = debugfs_create_u32("sampling_period", - S_IRUSR | S_IWUSR, debugfsdir, - &pinfo->sampling_period); - de->coeff_p = debugfs_create_u32("coeff_p", S_IRUSR | S_IWUSR, - debugfsdir, (u32 *)&pinfo->coeff_p); - de->coeff_i = debugfs_create_u32("coeff_i", S_IRUSR | S_IWUSR, - debugfsdir, (u32 *)&pinfo->coeff_i); - de->coeff_d = debugfs_create_u32("coeff_d", S_IRUSR | S_IWUSR, - debugfsdir, (u32 *)&pinfo->coeff_d); - de->smoothing_shift = debugfs_create_u32("smoothing_shift", - S_IRUSR | S_IWUSR, debugfsdir, - &pinfo->smoothing_shift); - de->sharpen_factor = debugfs_create_u32("sharpen_factor", - S_IRUSR | S_IWUSR, debugfsdir, - &pinfo->sharpen_factor); - de->sharpen_duration = debugfs_create_u32("sharpen_duration", - S_IRUSR | S_IWUSR, debugfsdir, - &pinfo->sharpen_duration); - de->norm_offset = debugfs_create_u32("norm_offset", - S_IRUSR | S_IWUSR, debugfsdir, - &pinfo->norm_offset); -#endif - - return pinfo; -} - -static void rate_control_pid_free(void *priv) -{ - struct rc_pid_info *pinfo = priv; -#ifdef CONFIG_MAC80211_DEBUGFS - struct rc_pid_debugfs_entries *de = &pinfo->dentries; - - debugfs_remove(de->norm_offset); - debugfs_remove(de->sharpen_duration); - debugfs_remove(de->sharpen_factor); - debugfs_remove(de->smoothing_shift); - debugfs_remove(de->coeff_d); - debugfs_remove(de->coeff_i); - debugfs_remove(de->coeff_p); - debugfs_remove(de->sampling_period); - debugfs_remove(de->target); -#endif - - kfree(pinfo->rinfo); - kfree(pinfo); -} - -static void *rate_control_pid_alloc_sta(void *priv, struct ieee80211_sta *sta, - gfp_t gfp) -{ - struct rc_pid_sta_info *spinfo; - - spinfo = kzalloc(sizeof(*spinfo), gfp); - if (spinfo == NULL) - return NULL; - - spinfo->last_sample = jiffies; - -#ifdef CONFIG_MAC80211_DEBUGFS - spin_lock_init(&spinfo->events.lock); - init_waitqueue_head(&spinfo->events.waitqueue); -#endif - - return spinfo; -} - -static void rate_control_pid_free_sta(void *priv, struct ieee80211_sta *sta, - void *priv_sta) -{ - kfree(priv_sta); -} - -static const struct rate_control_ops mac80211_rcpid = { - .name = "pid", - .tx_status = rate_control_pid_tx_status, - .get_rate = rate_control_pid_get_rate, - .rate_init = rate_control_pid_rate_init, - .alloc = rate_control_pid_alloc, - .free = rate_control_pid_free, - .alloc_sta = rate_control_pid_alloc_sta, - .free_sta = rate_control_pid_free_sta, -#ifdef CONFIG_MAC80211_DEBUGFS - .add_sta_debugfs = rate_control_pid_add_sta_debugfs, - .remove_sta_debugfs = rate_control_pid_remove_sta_debugfs, -#endif -}; - -int __init rc80211_pid_init(void) -{ - return ieee80211_rate_control_register(&mac80211_rcpid); -} - -void rc80211_pid_exit(void) -{ - ieee80211_rate_control_unregister(&mac80211_rcpid); -} diff --git a/net/mac80211/rc80211_pid_debugfs.c b/net/mac80211/rc80211_pid_debugfs.c deleted file mode 100644 index 6ff134650a84..000000000000 --- a/net/mac80211/rc80211_pid_debugfs.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * Copyright 2007, Mattias Nissler - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include "rate.h" - -#include "rc80211_pid.h" - -static void rate_control_pid_event(struct rc_pid_event_buffer *buf, - enum rc_pid_event_type type, - union rc_pid_event_data *data) -{ - struct rc_pid_event *ev; - unsigned long status; - - spin_lock_irqsave(&buf->lock, status); - ev = &(buf->ring[buf->next_entry]); - buf->next_entry = (buf->next_entry + 1) % RC_PID_EVENT_RING_SIZE; - - ev->timestamp = jiffies; - ev->id = buf->ev_count++; - ev->type = type; - ev->data = *data; - - spin_unlock_irqrestore(&buf->lock, status); - - wake_up_all(&buf->waitqueue); -} - -void rate_control_pid_event_tx_status(struct rc_pid_event_buffer *buf, - struct ieee80211_tx_info *stat) -{ - union rc_pid_event_data evd; - - evd.flags = stat->flags; - memcpy(&evd.tx_status, stat, sizeof(struct ieee80211_tx_info)); - rate_control_pid_event(buf, RC_PID_EVENT_TYPE_TX_STATUS, &evd); -} - -void rate_control_pid_event_rate_change(struct rc_pid_event_buffer *buf, - int index, int rate) -{ - union rc_pid_event_data evd; - - evd.index = index; - evd.rate = rate; - rate_control_pid_event(buf, RC_PID_EVENT_TYPE_RATE_CHANGE, &evd); -} - -void rate_control_pid_event_tx_rate(struct rc_pid_event_buffer *buf, - int index, int rate) -{ - union rc_pid_event_data evd; - - evd.index = index; - evd.rate = rate; - rate_control_pid_event(buf, RC_PID_EVENT_TYPE_TX_RATE, &evd); -} - -void rate_control_pid_event_pf_sample(struct rc_pid_event_buffer *buf, - s32 pf_sample, s32 prop_err, - s32 int_err, s32 der_err) -{ - union rc_pid_event_data evd; - - evd.pf_sample = pf_sample; - evd.prop_err = prop_err; - evd.int_err = int_err; - evd.der_err = der_err; - rate_control_pid_event(buf, RC_PID_EVENT_TYPE_PF_SAMPLE, &evd); -} - -static int rate_control_pid_events_open(struct inode *inode, struct file *file) -{ - struct rc_pid_sta_info *sinfo = inode->i_private; - struct rc_pid_event_buffer *events = &sinfo->events; - struct rc_pid_events_file_info *file_info; - unsigned long status; - - /* Allocate a state struct */ - file_info = kmalloc(sizeof(*file_info), GFP_KERNEL); - if (file_info == NULL) - return -ENOMEM; - - spin_lock_irqsave(&events->lock, status); - - file_info->next_entry = events->next_entry; - file_info->events = events; - - spin_unlock_irqrestore(&events->lock, status); - - file->private_data = file_info; - - return 0; -} - -static int rate_control_pid_events_release(struct inode *inode, - struct file *file) -{ - struct rc_pid_events_file_info *file_info = file->private_data; - - kfree(file_info); - - return 0; -} - -static unsigned int rate_control_pid_events_poll(struct file *file, - poll_table *wait) -{ - struct rc_pid_events_file_info *file_info = file->private_data; - - poll_wait(file, &file_info->events->waitqueue, wait); - - return POLLIN | POLLRDNORM; -} - -#define RC_PID_PRINT_BUF_SIZE 64 - -static ssize_t rate_control_pid_events_read(struct file *file, char __user *buf, - size_t length, loff_t *offset) -{ - struct rc_pid_events_file_info *file_info = file->private_data; - struct rc_pid_event_buffer *events = file_info->events; - struct rc_pid_event *ev; - char pb[RC_PID_PRINT_BUF_SIZE]; - int ret; - int p; - unsigned long status; - - /* Check if there is something to read. */ - if (events->next_entry == file_info->next_entry) { - if (file->f_flags & O_NONBLOCK) - return -EAGAIN; - - /* Wait */ - ret = wait_event_interruptible(events->waitqueue, - events->next_entry != file_info->next_entry); - - if (ret) - return ret; - } - - /* Write out one event per call. I don't care whether it's a little - * inefficient, this is debugging code anyway. */ - spin_lock_irqsave(&events->lock, status); - - /* Get an event */ - ev = &(events->ring[file_info->next_entry]); - file_info->next_entry = (file_info->next_entry + 1) % - RC_PID_EVENT_RING_SIZE; - - /* Print information about the event. Note that userspace needs to - * provide large enough buffers. */ - length = length < RC_PID_PRINT_BUF_SIZE ? - length : RC_PID_PRINT_BUF_SIZE; - p = scnprintf(pb, length, "%u %lu ", ev->id, ev->timestamp); - switch (ev->type) { - case RC_PID_EVENT_TYPE_TX_STATUS: - p += scnprintf(pb + p, length - p, "tx_status %u %u", - !(ev->data.flags & IEEE80211_TX_STAT_ACK), - ev->data.tx_status.status.rates[0].idx); - break; - case RC_PID_EVENT_TYPE_RATE_CHANGE: - p += scnprintf(pb + p, length - p, "rate_change %d %d", - ev->data.index, ev->data.rate); - break; - case RC_PID_EVENT_TYPE_TX_RATE: - p += scnprintf(pb + p, length - p, "tx_rate %d %d", - ev->data.index, ev->data.rate); - break; - case RC_PID_EVENT_TYPE_PF_SAMPLE: - p += scnprintf(pb + p, length - p, - "pf_sample %d %d %d %d", - ev->data.pf_sample, ev->data.prop_err, - ev->data.int_err, ev->data.der_err); - break; - } - p += scnprintf(pb + p, length - p, "\n"); - - spin_unlock_irqrestore(&events->lock, status); - - if (copy_to_user(buf, pb, p)) - return -EFAULT; - - return p; -} - -#undef RC_PID_PRINT_BUF_SIZE - -static const struct file_operations rc_pid_fop_events = { - .owner = THIS_MODULE, - .read = rate_control_pid_events_read, - .poll = rate_control_pid_events_poll, - .open = rate_control_pid_events_open, - .release = rate_control_pid_events_release, - .llseek = noop_llseek, -}; - -void rate_control_pid_add_sta_debugfs(void *priv, void *priv_sta, - struct dentry *dir) -{ - struct rc_pid_sta_info *spinfo = priv_sta; - - spinfo->events_entry = debugfs_create_file("rc_pid_events", S_IRUGO, - dir, spinfo, - &rc_pid_fop_events); -} - -void rate_control_pid_remove_sta_debugfs(void *priv, void *priv_sta) -{ - struct rc_pid_sta_info *spinfo = priv_sta; - - debugfs_remove(spinfo->events_entry); -} -- 1.9.3