Return-path: Received: from mail-wi0-f179.google.com ([209.85.212.179]:61125 "EHLO mail-wi0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752062AbaEGTx0 (ORCPT ); Wed, 7 May 2014 15:53:26 -0400 Received: by mail-wi0-f179.google.com with SMTP id bs8so1975891wib.0 for ; Wed, 07 May 2014 12:53:25 -0700 (PDT) From: Emmanuel Grumbach To: linux-wireless@vger.kernel.org Cc: Alexander Bondar , Emmanuel Grumbach Subject: [PATCH 01/23] iwlwifi: mvm: several fixes in scan Date: Wed, 7 May 2014 22:52:38 +0300 Message-Id: <1399492380-12050-1-git-send-email-egrumbach@gmail.com> (sfid-20140507_215501_869646_E0C6FF5C) In-Reply-To: <536A8EE3.2050906@gmail.com> References: <536A8EE3.2050906@gmail.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Alexander Bondar The firmware doesn't handle properly the fragmented scan. Stop using it. While at it change max_out_time and suspend_time units from usec to TUs as expected by firmware API. Signed-off-by: Alexander Bondar Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 8 ++-- drivers/net/wireless/iwlwifi/mvm/scan.c | 53 ++++++-------------------- 2 files changed, 16 insertions(+), 45 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index 9426905..d73a89e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -183,9 +183,9 @@ enum iwl_scan_type { * this number of packets were received (typically 1) * @passive2active: is auto switching from passive to active during scan allowed * @rxchain_sel_flags: RXON_RX_CHAIN_* - * @max_out_time: in usecs, max out of serving channel time + * @max_out_time: in TUs, max out of serving channel time * @suspend_time: how long to pause scan when returning to service channel: - * bits 0-19: beacon interal in usecs (suspend before executing) + * bits 0-19: beacon interal in TUs (suspend before executing) * bits 20-23: reserved * bits 24-31: number of beacons (suspend between channels) * @rxon_flags: RXON_FLG_* @@ -383,8 +383,8 @@ enum scan_framework_client { * @quiet_plcp_th: quiet channel num of packets threshold * @good_CRC_th: passive to active promotion threshold * @rx_chain: RXON rx chain. - * @max_out_time: max uSec to be out of assoceated channel - * @suspend_time: pause scan this long when returning to service channel + * @max_out_time: max TUs to be out of assoceated channel + * @suspend_time: pause scan this TUs when returning to service channel * @flags: RXON flags * @filter_flags: RXONfilter * @tx_cmd: tx command for active scan; for 2GHz and for 5GHz. diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index c91dc84..cba88a3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -277,51 +277,22 @@ static void iwl_mvm_scan_calc_params(struct iwl_mvm *mvm, IEEE80211_IFACE_ITER_NORMAL, iwl_mvm_scan_condition_iterator, &global_bound); - /* - * Under low latency traffic passive scan is fragmented meaning - * that dwell on a particular channel will be fragmented. Each fragment - * dwell time is 20ms and fragments period is 105ms. Skipping to next - * channel will be delayed by the same period - 105ms. So suspend_time - * parameter describing both fragments and channels skipping periods is - * set to 105ms. This value is chosen so that overall passive scan - * duration will not be too long. Max_out_time in this case is set to - * 70ms, so for active scanning operating channel will be left for 70ms - * while for passive still for 20ms (fragment dwell). - */ - if (global_bound) { - if (!iwl_mvm_low_latency(mvm)) { - params->suspend_time = ieee80211_tu_to_usec(100); - params->max_out_time = ieee80211_tu_to_usec(600); - } else { - params->suspend_time = ieee80211_tu_to_usec(105); - /* P2P doesn't support fragmented passive scan, so - * configure max_out_time to be at least longest dwell - * time for passive scan. - */ - if (vif->type == NL80211_IFTYPE_STATION && !vif->p2p) { - params->max_out_time = ieee80211_tu_to_usec(70); - params->passive_fragmented = true; - } else { - u32 passive_dwell; - /* - * Use band G so that passive channel dwell time - * will be assigned with maximum value. - */ - band = IEEE80211_BAND_2GHZ; - passive_dwell = iwl_mvm_get_passive_dwell(band); - params->max_out_time = - ieee80211_tu_to_usec(passive_dwell); - } - } + if (!global_bound) + goto not_bound; + + params->suspend_time = 100; + params->max_out_time = 600; + + if (iwl_mvm_low_latency(mvm)) { + params->suspend_time = 250; + params->max_out_time = 250; } +not_bound: + for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) { - if (params->passive_fragmented) - params->dwell[band].passive = 20; - else - params->dwell[band].passive = - iwl_mvm_get_passive_dwell(band); + params->dwell[band].passive = iwl_mvm_get_passive_dwell(band); params->dwell[band].active = iwl_mvm_get_active_dwell(band, n_ssids); } -- 1.8.3.2