Return-path: Received: from hauke-m.de ([5.39.93.123]:40741 "EHLO hauke-m.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751608AbaH3Nd1 (ORCPT ); Sat, 30 Aug 2014 09:33:27 -0400 Message-ID: <5401D2A4.7070402@hauke-m.de> (sfid-20140830_153338_291364_CE1B42FF) Date: Sat, 30 Aug 2014 15:33:24 +0200 From: Hauke Mehrtens MIME-Version: 1.0 To: Arnd Bergmann , =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= CC: "linux-mips@linux-mips.org" , "linux-wireless@vger.kernel.org" Subject: Re: Booting bcm47xx (bcma & stuff), sharing code with bcm53xx References: <53FF9D9B.30106@hauke-m.de> <5882203.GXbhhcHqjK@wuerfel> In-Reply-To: <5882203.GXbhhcHqjK@wuerfel> Content-Type: text/plain; charset=utf-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: On 08/29/2014 10:04 PM, Arnd Bergmann wrote: > On Friday 29 August 2014 17:21:18 Rafał Miłecki wrote: >> On 28 August 2014 23:22, Hauke Mehrtens wrote: >>> On 08/28/2014 01:56 PM, Arnd Bergmann wrote: >>>> On Thursday 28 August 2014 13:39:55 Rafał Miłecki wrote: >>>>> Well, that depends. Hauke was planning to put info about flash in DT. >>>>>> I think it would make sense to have a common driver that has both >>>>>> an 'early' init part used by MIPS and a regular init part used by >>>>>> ARM and potentially also on MIPS if we want. Most of the code can >>>>>> still be shared. >>>>> >>>>> OK, now it's clear what you meant. >>>>> The thing is that we may want to call probe function from >>>>> drivers/bcma/main.c. I think we never meant to call it directly from >>>>> arch code. This code in drivers/bcma/main.c is used on both: MIPS and >>>>> ARM. So I wonder if there is much sense in doing it like >>>>> #ifdev MIPS >>>>> bcm47xx_nvram_init(nvram_address); >>>>> #endif >>>>> #ifdef ARM >>>>> nvram_device.resource[0].start = nvram_address; >>>>> platform_device_register(nvram_device); >>>>> #endif >>>>> >>>>> What do you think about this? >>>> >>>> I definitely don't want to see any manual platform_device_register() >>>> calls on ARM, any device should be either a platform_device probed >>>> from DT, or a bcma_device that comes from the bcma bus. >>>> >>>> I suspect I'm still missing part of the story here. How is the >>>> nvram chip actually connected? >>> >>> I think we have to provide an own device tree for every board, like it >>> is done for other arm boards. If we do so I do not see a problem to >>> specify the nvram address space in device tree. >> >> Alright, I think we should try to answer one main question at this >> point: how much data we want to put in DTS? It's still not clear to >> me. I think we need a separate device tree description for every board anyway (to specify the GPIO configuration) and then I do not see a big problem specifying if this board boots from serial or nand flash. >> >> What about this flash memory mapping? You added this in your RFC: >> reg = <0x1c000000 0x01000000>; >> >> As I described, the first part (address 0x1c000000) could be extracted >> on runtime. For that you need my patch: >> [PATCH] bcma: get & store info about flash type SoC booted from >> http://www.spinics.net/lists/linux-wireless/msg126163.html >> >> And then add some simple "swtich" like: >> switch (boot_device) { >> case BCMA_BOOT_DEV_NAND: >> nvram_address = 0x1c000000; >> break; >> case BCMA_BOOT_DEV_SERIAL: >> nvram_address = 0x1e000000; >> break; >> } > > At the very least, those addresses should come from DT in some form. > We should never hardcode register locations in kernel code, since those > tend to change when a new hardware version comes out. Even if you are > sure that wouldn't happen with bcm53xx, it's still bad style and I > want to avoid having other developers copy code like that into a new > platform or driver. > >> So... should we handle it on runtime? Or do we really want this in DTS? >> I was thinking about doing this on runtime. This would limit amount of >> DTS entries and this is what makes more sense to me. The same way >> don't hardcode many other hardware details. For example we don't store >> flash size, block size, erase size in DTS. We simply use JEDEC and >> mtd's spi-nor framework database. > > I think the main difference is that for the example of the flash > chip, we can find out that information by looking at the device itself: > The DT describes how to find the device and from there we can do > proper hardware probing. > > For the case of the nvram, I don't see how that would be done, since > the presence of the device itself is something your code above tries > to derive from something that from an unrelated setting, so I'd rather > see it done explicit in DT. > > You mentioned that the 'boot_device' variable in your code snippet > comes from a hardware register that can be accessed easily, right? > A possible way to handle it would then be to have two DT entries > like > > nvram@1c000000 { > compatible = "bcm,bcm4710-nvram"; > reg = <0x1c000000 0x1000000>; > bcm,boot-device = BCMA_BOOT_DEV_NAND; > }; > > nvram@1c000000 { > compatible = "bcm,bcm4710-nvram"; > reg = <0x1e000000 0x1000000>; > bcm,boot-device = BCMA_BOOT_DEV_SERIAL; > }; > > We would then have two platform device instances and get the > driver's probe function to reject any device whose bcm,boot-device > property doesn't match the contents of the register. > > That would correctly describe the hardware while still allowing > automatic probing of the device, but I don't see a value in > the extra complexity compared to just marking one of the two > as status="disabled". This looks interesting. But when we have an own device tree description for every board I do not see many advantages over using status="disabled". Anyway we can share all the common device tree description parts and we can add the device tree description after building the kernel, we are doing both for now. Hauke