Return-path: Received: from mail-pd0-f174.google.com ([209.85.192.174]:62986 "EHLO mail-pd0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750892AbaHDENI (ORCPT ); Mon, 4 Aug 2014 00:13:08 -0400 Received: by mail-pd0-f174.google.com with SMTP id fp1so8864869pdb.19 for ; Sun, 03 Aug 2014 21:13:07 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: <2443fe2b84a649f8888072e45cea53e1@SIXPR01MB256.apcprd01.prod.exchangelabs.com> References: <2443fe2b84a649f8888072e45cea53e1@SIXPR01MB256.apcprd01.prod.exchangelabs.com> Date: Mon, 4 Aug 2014 09:43:07 +0530 Message-ID: (sfid-20140804_061312_672790_B56674B4) Subject: Re: 80211ac support in 88W8897 From: Avinash Patil To: Krishnankutty Plachikkattle Cc: "linux-wireless@vger.kernel.org" Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi Krishnan, Here is sample 11ac config file: interface=uap0 driver=nl80211 ssid=mwifiex-11ac hw_mode=a channel=36 beacon_int=100 dtim_period=1 rts_threshold=2347 fragm_threshold=2346 auth_algs=1 send_probe_response=0 wmm_enabled=1 ieee80211n=1 ht_capab=[HT40+] ieee80211ac=1 vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42 Thanks, Avinash On Thu, Jul 31, 2014 at 11:24 AM, Krishnankutty Plachikkattle wrote: > Hello Bing, > > I am trying to enable HT support for 88W8897 using hostapd 2.2. > 80211n mode works well . Now I want to enable AC mode to improve throughput . > > Can you share a sample hostapd.conf with 80211ac configuration. > > Thanks in advance, > > Regards, > Krishnan. > > -----Original Message----- > From: Bing Zhao [mailto:bzhao@marvell.com] > Sent: Friday, May 30, 2014 6:16 AM > To: Avinash Patil; Krishnankutty Plachikkattle; linux-wireless@vger.kernel.org > Subject: RE: Support for 88W8897 in 3.10.17 kernel > > >>>Is there any open source driver that supports NFC and Bluetooth in this SoC? >> Yes; btmrvl.ko and btusb.ko would support PCIe-USB8897 BT functionality. >> Please check CONFIG_BT_MRVL kernel configuration parameter. > > Clarification: > btmrvl driver only supports Bluetooth over SDIO (btmrvl_sdio). So it's for SD8897 cards only. > The generic btusb driver works for PCIe-USB 8897 cards (Bluetooth is over USB). > > Regards, > Bing > >> For NFC, nfcmrvl.ko & nfcmrvl_usb.ko would support 8897 NFC functionality. >> Please check for CONFIG_NFC_MRVL kernel configuration parameter. >> >> Thanks, >> Avinash > > > ________________________________ > > http://www.mindtree.com/email/disclaimer.html