Return-path: Received: from sabertooth02.qualcomm.com ([65.197.215.38]:33251 "EHLO sabertooth02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752198AbaJ1Oux (ORCPT ); Tue, 28 Oct 2014 10:50:53 -0400 From: Vladimir Kondratiev To: "John W . Linville" CC: Vladimir Kondratiev , , Subject: [PATCH 2/5] wil6210: reset flow updates Date: Tue, 28 Oct 2014 16:50:07 +0200 Message-ID: <1414507810-23141-3-git-send-email-qca_vkondrat@qca.qualcomm.com> (sfid-20141028_155056_920777_C7A70FA9) In-Reply-To: <1414507810-23141-1-git-send-email-qca_vkondrat@qca.qualcomm.com> References: <1414507810-23141-1-git-send-email-qca_vkondrat@qca.qualcomm.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: As communicated with the firmware & hardware teams Signed-off-by: Vladimir Kondratiev --- drivers/net/wireless/ath/wil6210/main.c | 23 ++++++++++++++++++----- drivers/net/wireless/ath/wil6210/wil6210.h | 6 ++++++ 2 files changed, 24 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 7900384..0e95557 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -400,7 +400,7 @@ static inline void wil_release_cpu(struct wil6210_priv *wil) static int wil_target_reset(struct wil6210_priv *wil) { int delay = 0; - u32 hw_state; + u32 x; u32 rev_id; bool is_sparrow = (wil->board->board == WIL_BOARD_SPARROW); @@ -415,9 +415,22 @@ static int wil_target_reset(struct wil6210_priv *wil) S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT_CAR_PERST_RST); wil_halt_cpu(wil); - C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_CAR_AHB_SW_SEL); /* 40 MHz */ if (is_sparrow) { + S(RGF_CAF_OSC_CONTROL, BIT_CAF_OSC_XTAL_EN); + /* XTAL stabilization should take about 3ms */ + usleep_range(5000, 7000); + x = R(RGF_CAF_PLL_LOCK_STATUS); + if (!(x & BIT_CAF_OSC_DIG_XTAL_STABLE)) { + wil_err(wil, "Xtal stabilization timeout\n" + "RGF_CAF_PLL_LOCK_STATUS = 0x%08x\n", x); + return -ETIME; + } + /* switch 10k to XTAL*/ + C(RGF_USER_SPARROW_M_4, BIT_SPARROW_M_4_SEL_SLEEP_OR_REF); + /* 40 MHz */ + C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_CAR_AHB_SW_SEL); + W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x3ff81f); W(RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0xf); } @@ -458,13 +471,13 @@ static int wil_target_reset(struct wil6210_priv *wil) /* wait until device ready. typical time is 200..250 msec */ do { msleep(RST_DELAY); - hw_state = R(RGF_USER_HW_MACHINE_STATE); + x = R(RGF_USER_HW_MACHINE_STATE); if (delay++ > RST_COUNT) { wil_err(wil, "Reset not completed, hw_state 0x%08x\n", - hw_state); + x); return -ETIME; } - } while (hw_state != HW_MACHINE_BOOT_DONE); + } while (x != HW_MACHINE_BOOT_DONE); /* TODO: Erez check rev_id != 1 */ if (!is_sparrow && (rev_id != 1)) diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 7ffaf2f..18f8729 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -117,6 +117,8 @@ struct RGF_ICR { #define BIT_USER_USER_ICR_SW_INT_2 BIT(18) #define RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0 (0x880c18) #define RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1 (0x880c2c) +#define RGF_USER_SPARROW_M_4 (0x880c50) /* Sparrow */ + #define BIT_SPARROW_M_4_SEL_SLEEP_OR_REF BIT(2) #define RGF_DMA_EP_TX_ICR (0x881bb4) /* struct RGF_ICR */ #define BIT_DMA_EP_TX_ICR_TX_DONE BIT(0) @@ -152,6 +154,10 @@ struct RGF_ICR { #define RGF_MAC_MTRL_COUNTER_0 (0x886aa8) #define RGF_CAF_ICR (0x88946c) /* struct RGF_ICR */ +#define RGF_CAF_OSC_CONTROL (0x88afa4) + #define BIT_CAF_OSC_XTAL_EN BIT(0) +#define RGF_CAF_PLL_LOCK_STATUS (0x88afec) + #define BIT_CAF_OSC_DIG_XTAL_STABLE BIT(0) /* popular locations */ #define HOST_MBOX HOSTADDR(RGF_USER_USER_SCRATCH_PAD) -- 2.1.0