Return-path: Received: from mail-wg0-f46.google.com ([74.125.82.46]:37077 "EHLO mail-wg0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752846AbaJMJaY convert rfc822-to-8bit (ORCPT ); Mon, 13 Oct 2014 05:30:24 -0400 Received: by mail-wg0-f46.google.com with SMTP id l18so8221332wgh.29 for ; Mon, 13 Oct 2014 02:30:23 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: <024a01cfe6c7$5e427dd0$1ac77970$@acksys.fr> References: <773DB8A82AB6A046AE0195C68612A319018C2750@sbs2003.acksys.local> <024a01cfe6c7$5e427dd0$1ac77970$@acksys.fr> Date: Mon, 13 Oct 2014 11:30:22 +0200 Message-ID: (sfid-20141013_113028_045701_B75948B6) Subject: Re: ath10k firmware crash From: Michal Kazior To: voncken Cc: "ath10k@lists.infradead.org" , linux-wireless Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: On 13 October 2014 11:23, voncken wrote: > > >> >> Are you perhaps trying to run STA with 4addr bridging? If so then make sure >> you use recent ath10k as this was known to be a problem. >> > We tested without the 4addr bridging, that works fine but we can't add the interface in bridge :-( > > Have you a benchmark reference with ATH10K ? at this time we can send around 700 Mbit/s, is it the maximum or we can expected better ? If this is OTA then this is pretty good. If this is cabled RF w/ attentuator it should be possible to get ~900mbps of UDP traffic with multiple streams on iperf. At least that's what I was getting on 10.1 firmware (on both AP and STA) last time I checked. Getting more than 700mbps OTA requires AP and STA antenna alignment voodoo. Michał