Return-path: Received: from mail-wi0-f179.google.com ([209.85.212.179]:50191 "EHLO mail-wi0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755809AbaJWOF6 (ORCPT ); Thu, 23 Oct 2014 10:05:58 -0400 Received: by mail-wi0-f179.google.com with SMTP id d1so2104036wiv.0 for ; Thu, 23 Oct 2014 07:05:57 -0700 (PDT) From: Bartosz Markowski To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Bartosz Markowski Subject: [PATCH] ath10k: fix pm resume after suspend Date: Thu, 23 Oct 2014 16:05:49 +0200 Message-Id: <1414073150-11593-1-git-send-email-bartosz.markowski@tieto.com> (sfid-20141023_160722_853367_CCAF9862) Sender: linux-wireless-owner@vger.kernel.org List-ID: Firmware was crashing when we were trying to warm reset it after suspend. This was due to the fact that target registeres can be accessed only if the hardware is awaken. This patch makes sure to awake the device also on the hif up, not only in case of probe call path. Signed-off-by: Bartosz Markowski --- drivers/net/wireless/ath/ath10k/pci.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 86f734e..4dee319 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -1858,10 +1858,16 @@ static int ath10k_pci_hif_power_up_warm(struct ath10k *ar) static int ath10k_pci_hif_power_up(struct ath10k *ar) { - int ret; + int ret = 0; ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power up\n"); + ret = ath10k_pci_wake(ar); + if (ret) { + ath10k_err(ar, "failed to wake up target: %d\n", ret); + return ret; + } + /* * Hardware CUS232 version 2 has some issues with cold reset and the * preferred (and safer) way to perform a device reset is through a @@ -1876,7 +1882,7 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar) ret); if (ath10k_pci_reset_mode == ATH10K_PCI_RESET_WARM_ONLY) - return ret; + goto err_sleep; ath10k_warn(ar, "trying cold reset\n"); @@ -1884,11 +1890,15 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar) if (ret) { ath10k_err(ar, "failed to power up target using cold reset too (%d)\n", ret); - return ret; + goto err_sleep; } } - return 0; + return ret; + +err_sleep: + ath10k_pci_sleep(ar); + return ret; } static void ath10k_pci_hif_power_down(struct ath10k *ar) @@ -1896,6 +1906,7 @@ static void ath10k_pci_hif_power_down(struct ath10k *ar) ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power down\n"); ath10k_pci_warm_reset(ar); + ath10k_pci_sleep(ar); } #ifdef CONFIG_PM @@ -2513,6 +2524,8 @@ static int ath10k_pci_probe(struct pci_dev *pdev, /* This shouldn't race as the device has been reset above. */ ath10k_pci_irq_disable(ar); + ath10k_pci_sleep(ar); + ret = ath10k_core_register(ar, chip_id); if (ret) { ath10k_err(ar, "failed to register driver core: %d\n", ret); @@ -2564,7 +2577,6 @@ static void ath10k_pci_remove(struct pci_dev *pdev) ath10k_pci_deinit_irq(ar); ath10k_pci_ce_deinit(ar); ath10k_pci_free_ce(ar); - ath10k_pci_sleep(ar); ath10k_pci_release(ar); ath10k_core_destroy(ar); } -- 1.8.2