Return-path: Received: from mail-gw1-out.broadcom.com ([216.31.210.62]:35780 "EHLO mail-gw1-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752319AbbA3OkQ (ORCPT ); Fri, 30 Jan 2015 09:40:16 -0500 Message-ID: <54CB97CC.2050001@broadcom.com> (sfid-20150130_154021_697022_4DDE0598) Date: Fri, 30 Jan 2015 15:40:12 +0100 From: Arend van Spriel MIME-Version: 1.0 To: =?UTF-8?B?U8OpYmFzdGllbiBCb3VyZGVhdWR1Y3E=?= CC: Subject: Re: "brcmfmac: brcmf_sdio_htclk: HT Avail timeout" on Thinkpad Tablet 10 References: <54C88C7D.707@m-labs.hk> In-Reply-To: <54C88C7D.707@m-labs.hk> Content-Type: text/plain; charset="UTF-8"; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: On 01/28/15 08:15, Sébastien Bourdeauducq wrote: > Hi, > > The Lenovo Thinkpad Tablet 10 is a complete disaster under Linux, and > among many problems the SDIO brcmfmac wifi does not work. > > I get the following messages in the kernel log: > brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done > for chip 4324 rev 6 pmurev 17 > brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 > [repeated] > > and the network interface is never created. > > I'm running kernel 3.18.4, my brcmfmac43241b4-sdio.bin is identical to > the one in the linux-firmware repository, and I have attached the > brcmfmac43241b4-sdio.txt that I have extracted from the EFI variables. When you say your firmware is identical what does that mean. Did you do a diff? Can you do 'hexdump -C brcmfmac43241b4-sdio.bin | tail -30'? I will be getting a laptop with 43241 integrated soonish (monday?). Hopefully it has same chip revision. Regards, Arend > Any help would be appreciated. > > Sébastien